RoHS PCI40 Power Chip Inductors Dimensions: 0.510 Max (12.95) 0.300 (7.62) 1st 0.370 (9.40) Max Inches (mm) 0.205 Max (5.21) 2nd 0.100 (2.54) 3rd 0.110 (2.79) 0.100 (2.54) 0.118 (3.00) 0.290 (7.37) * Notice of marking change see “Marking” below. Allied Part Number Inductance (µh) Tolerance (%) SRF (MHz) TYP DCR Max. Ω) Isat (A) Irms (A) • High energy storage and low DCR PCI40-1R0M-RC 1.0 20 100 .009 9.0 6.8 • Designed with high heat resistant PCI40-1R5M-RC 1.5 20 90 .010 8.0 6.4 PCI40-2R2M-RC 2.2 20 80 .012 7.0 6.1 PCI40-3R3M-RC 3.3 20 65 .015 6.4 5.4 PCI40-4R7M-RC 4.7 20 45 .018 5.4 4.8 PCI40-6R8M-RC 6.8 20 38 .027 4.6 4.4 PCI40-100M-RC 10 20 30 .038 3.8 3.9 PCI40-150M-RC 15 20 27 .046 3.0 3.1 PCI40-220M-RC 22 20 19 .085 2.6 2.7 PCI40-330M-RC 33 20 15 0.10 2.0 2.1 at 100KHz, 0.1 Vrms. After soldering, push PCI40-470M-RC 47 20 12 0.14 1.6 1.8 Operating Temp. Range: i-40° to +85°C.ll PCI40-680M-RC 68 20 10 0.20 1.4 1.5 PCI40-101M-RC 100 20 9.0 0.28 1.2 1.3 Temperature Rise: ∆T=15ºC rise PCI40-151M-RC 150 20 6.0 0.40 1.0 1.0 typical at Irms. PCI40-221M-RC 220 20 5.0 0.61 0.8 0.8 PCI40-331M-RC 330 20 4.5 1.02 0.6 0.6 PCI40-471M-RC 470 20 3.5 1.27 0.5 0.5 and tolerance. For example: “101K” for 100µh 10%. PCI40-681M-RC 680 20 2.5 2.02 0.4 0.4 Packaging: 750 pieces per 13 inch reel. PCI40-102M-RC 1000 20 2.0 3.00 0.3 0.3 Features • Compact and Low Profile materials for reflow operation • Wrap around terminals for excellent solder quality and inspection • Flat top for pick and place assembly • Non standard values available Electrical Inductance Range: 1.0µh to 1000µh. Tolerance: ± 20% over the entire inductance range. Test Frequency: Inductance measured Inductance Drop: 20% typical at rated Isat.0 to 2000) x 10 -6°C. Physical Marking: Notice: We will be changing our marking system to the 4 character EIA code for inductance All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 7/23/09 www.alliedcomponents.com