RoHS Power Chip Inductors Dimensions: Tolerance (%) Inches (mm) Allied Part Number Inductance (mH) PC1006-602K-RC 6000 10 1 14 0.27 PC1006-822K-RC 8200 10 1 50 0.20 Test Freq. KHz,1v PC1006 DCR Max. (Ω) IDC Max. (A) Features • Unshielded SMD Power Inductor • High Saturation Current • Suitable for large currents • Ideal for DC-DC converter applications All specifications subject to change without notice. Electrical Inductance Range: 6mH to 8.2mH Tolerance: 20% over entire range Also available in tighter tolerances Test Frequency: As noted Operating Temp: -40ºC ~ +85ºC IDC: Current at which Inductance drops 10% of original value with a ∆ T= 40ºC whichever is lower. Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec ± 1 sec. Test Equipment (L): HP4192A LF Impedence Analyzer (RDC): Chen Hwa 502BC (IDC): HP4284A with HP42841A or Chen Hwa 1061 + 301A Physical Packaging: 500 pieces per 13 inch reel. Marking: EIA Inductance Code. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1512/11/08 www.alliedcomponents.com