Model 1M803S Rev. C Micro Xinger 3dB Hybrid Coupler Description The 1M803S Micro Xinger® is a low profile, miniature 3dB hybrid coupler in an easy to use surface mount package designed for U-NII, ISM and hyperLAN applications. The 1M803S is designed for balanced amplifiers and signal distribution and is an ideal solution for the ever increasing demands of the wireless industry for smaller printed circuit boards and high performance. Parts have been subjected to rigorous qualification testing and units are 100% tested. They are manufactured using materials with x and y thermal expansion coefficients compatible with common substrates such as FR4 and G-10. Produced with 6 of 6 RoHS compliant tin immersion. ELECTRICAL SPECIFICATIONS** Features: • 5.0 – 6.0 GHz • Very Low Loss • High Isolation • 90o Quadrature • • • • • Surface Mountable Tape And Reel New Micro-Package 100% Tested Lead Free Frequency Isolation Insertion Loss VSWR GHz dB Min dB Max Max:1 5.0 – 6.0 20 0.25 1.21 Amplitude Balance Phase Balance Power ΘJC dB Max Degrees Ave. CW Watts ºC/Watt ºC ± 0.30 ±3 20 78.1 -55 to +85 Operating Temp. **Specification based on performance of unit properly installed on microstrip printed circuit boards with 50 Ω nominal impedance. Specifications subject to change without notice. Mechanical Outline .065±.007 [1.66±0.18] Pin 1 .400±.010 [10.16±0.25] GND .200±.010 [5.08±0.25] Pin 4 4X .024±.004 [0.61±0.10] Pin 2 GND Pin 3 Dimensions are in Inches [Millimeters] 1M803S Mechanical Outline 4X .048±.00 [1.22±0. .104±.004 [2.64±0.10] Denotes Array Number .304±.004 [7.72±0.10] Tolerances are Non-Cumulative Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model 1M803S Rev. C Typical Performance: 5.0 GHz. to 6.0 GHz. Isolation 1M803S -10 -3 -20 Isolation (dB) Coupling (dB) Coupling 1M803S -2.8 -3.2 -30 -3.4 -3.6 5000 -40 5200 5400 5600 5800 -50 5000 6000 5200 5600 5400 Frequency (MHz) 5800 6000 5800 6000 Frequency (MHz) Return Loss 1M803S Phase Balance 1M803S -87 0 -88 -10 Phase Balance (D ) -89 Return Loss (dB) -20 -90 -30 -91 -40 -50 5000 -92 5200 5400 5600 5800 6000 -93 5000 5200 5400 Frequency (MHz) 5600 Frequency (MHz) Pin Configuration Mounting Footprint To ensure proper electrical and thermal performance there must be a ground plane with 100% solder connection underneath the part Multiple plated thru holes to ground .300 [7.62] .100 [2.54] 4X .034 [0.86] 4X .063 SQ [1.60] Dimensions are in Inches [Millimeters] 1M803S Mounting Footprint USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing. 4X 50 Transmission Line Model 1M803S Rev. C Carrier Tape Parts are oriented in embossed tape as shown below _ .157 [4.00] .079 [2.00] .012 [.30] Ø.059 [Ø1.50] .069 [1.70] A .453 [11.50] .433 [11.00] .094 [2.40] .945 [24.00] MODEL NO. .228 [5.80] .315 [8.00] A SECTION A-A Direction of Part Feed (Unloading) Dimensions are in inches [mm] Reel • Parts are available in both reel and tube • Quantity of 48 parts available per tube ØA ØC ØD QUANTITY/REEL 2000 TABLE 1 REEL DIMENSIONS (inches [mm]) ØA 13.0 [330.2] B 0.945 [24.0] ØC 4.0 [101.6] ØD 0.512 [13.0] B Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392