New Product TPC6.8 thru TPC43A Vishay General Semiconductor Surface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions FEATURES • Very low profile - typical height of 1.1 mm • Ideal for automated placement eSMP TM Series • Uni-direction only • Patented PAR® construction A • Excellent clamping capability *Patent #'s 4,980,315 5,166,769 5,278,094 • Low incremental surge resistance 1 d* e t n e Pat • Very fast response time 2 • Meets MSL level 1, per J-STD-020C TO-277A (SMPC) • Solder dip 260 °C, 40 s A Cathode 1 Anode Cathode 2 • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC • Halogen-free PRIMARY CHARACTERISTICS VBR 6.8 V to 43 V PPPM 1500 W IFSM 200 A TJ max. 185 °C MECHANICAL DATA Case: TO-277A (SMPC) Molding compound meets UL 94V-0 flammability rating. TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. Base P/NHE3 - RoHS compliant, high reliability/ automotive grade (AEC-Q101 qualified) Base P/NHM3 - halogen-free and RoHS compliant, high reliability/automotive grade (AEC-Q101 qualified) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 HE3 and HM3 suffix meets JESD 201 class 2 whisker test MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Peak pulse power dissipation with a 10/1000 µs waveform (1)(2) VALUE UNIT PPPM 1500 W IPPM see next table A IFSM 200 A VF 3.5 V TJ, TSTG - 65 to + 185 °C (Fig. 3) Peak power pulse current with a 10/1000 µs waveform (1) (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave (2) Maximum instantaneous forward voltage at 100 A (3) Operating junction and storage temperature range Notes (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2 (2) Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum (3) Pulse test: 300 µs pulse width, 1 % duty cycle Document Number: 89056 Revision: 04-Aug-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 New Product TPC6.8 thru TPC43A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE TYPE DEVICE MARKING CODE BREAKDOWN VOLTAGE VBR (1) AT IT (V) MAX. 7.48 TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM IR (µA) TJ = 150 °C MAXIMUM REVERSE LEAKAGE AT VWM ID (µA) MAXIMUM PEAK PULSE SURGE CURRENT IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 10.8 TPC6.8 DDP MIN. 6.12 10.0 5.50 1500 10 000 139.0 TPC6.8A DEP 6.45 7.14 10.0 5.80 1500 10 000 143.0 10.5 TPC7.5 DFP 6.75 8.25 10.0 6.05 500 5000 128.0 11.7 TPC7.5A DGP 7.13 7.88 10.0 6.40 500 5000 133.0 11.3 TPC8.2 DHP 7.38 9.02 10.0 6.63 200 2000 120.0 12.5 TPC8.2A DKP 7.79 8.61 10.0 7.02 200 2000 124.0 12.1 TPC9.1 DLP 8.19 10.0 1.0 7.37 50 500 109.0 13.8 TPC9.1A DMP 8.65 9.55 1.0 7.78 50 500 112.0 13.4 TPC10 DNP 9.00 11.0 1.0 8.10 20 200 100.0 15.0 TPC10A DPP 9.50 10.5 1.0 8.55 20 200 103.0 14.5 TPC11 DQP 9.90 12.1 1.0 8.92 5.0 50 92.6 16.2 TPC11A DRP 10.5 11.6 1.0 9.40 5.0 50 96.2 15.6 TPC12 DSP 10.8 13.2 1.0 9.72 2.0 10 86.7 17.3 TPC12A DTP 11.4 12.6 1.0 10.2 2.0 10 89.8 16.7 TPC13 DUP 11.7 14.3 1.0 10.5 2.0 10 78.9 19.0 TPC13A DVP 12.4 13.7 1.0 11.1 2.0 10 82.4 18.2 TPC15 DWP 13.5 16.5 1.0 12.1 1.0 10 68.2 22.0 TPC15A DXP 14.3 15.8 1.0 12.8 1.0 10 70.8 21.2 TPC16 DYP 14.4 17.6 1.0 12.9 1.0 10 63.8 23.5 TPC16A DZP 15.2 16.8 1.0 13.6 1.0 10 66.7 22.5 TPC18 EDP 16.2 19.8 1.0 14.5 1.0 10 56.6 26.5 TPC18A EEP 17.1 18.9 1.0 15.3 1.0 10 59.5 25.2 TPC20 EFP 18.0 22.0 1.0 16.2 1.0 10 51.5 29.1 TPC20A EGP 19.0 21.0 1.0 17.1 1.0 10 54.2 27.7 TPC22 EHP 19.8 24.2 1.0 17.8 1.0 10 47.0 31.9 TPC22A EKP 20.9 23.1 1.0 18.8 1.0 10 49.0 30.6 TPC24 ELP 21.6 26.4 1.0 19.4 1.0 10 43.2 34.7 TPC24A EMP 22.8 25.2 1.0 20.5 1.0 10 45.2 33.2 TPC27 ENP 24.3 29.7 1.0 21.8 1.0 10 38.4 39.1 TPC27A EPP 25.7 28.4 1.0 23.1 1.0 10 40.0 37.5 TPC30 EQP 27.0 33.0 1.0 24.3 1.0 10 34.5 43.5 TPC30A ERP 28.5 31.5 1.0 25.6 1.0 10 36.2 41.4 TPC33 ESP 29.7 36.3 1.0 26.8 1.0 10 31.4 47.7 TPC33A ETP 31.4 34.7 1.0 28.2 1.0 10 32.8 45.7 TPC36 EUP 32.4 39.6 1.0 29.1 1.0 15 28.8 52.0 TPC36A EVP 34.2 37.8 1.0 30.8 1.0 15 30.1 49.9 TPC39 EWP 35.1 42.9 1.0 31.6 1.0 15 26.6 56.4 TPC39A EXP 37.1 41.0 1.0 33.3 1.0 15 27.8 53.9 TPC43 EYP 38.7 47.3 1.0 34.8 1.0 20 24.2 61.9 TPC43A EZP 40.9 45.2 1.0 36.8 1.0 20 25.3 59.3 Notes (1) VBR measured after IT applied for 300 µs, IT = square wave pulse or equivalent (2) Surge current waveform per Fig. 3 and derated per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 89056 Revision: 04-Aug-08 New Product TPC6.8 thru TPC43A Vishay General Semiconductor ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE TPC10AHE3/86A (1) 0.10 86A 1500 7" diameter plastic tape and reel TPC10AHE3/87A (1) 0.10 87A 6500 13" diameter plastic tape and reel TPC10AHM3/86A (1) 0.10 86A 1500 7" diameter plastic tape and reel TPC10AHM3/87A (1) 0.10 87A 6500 13" diameter plastic tape and reel Note (1) High reliability/automotive grade (AEC-Q101 qualified) RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 150 TA = 25 °C Non-Repetitive Pulse Waveform shown in Fig. 3 10 1 TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM tr = 10 µs Peak Value IPPM 100 Half Value - IPP IPPM 2 50 10/1000 µs Waveform as defined by R.E.A. td 0 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 0 1.0 2.0 3.0 td - Pulse Width (s) t - Time (ms) Figure 1. Peak Pulse Power Rating Curve Figure 3. Pulse Waveform 100 4.0 10 000 VR, measured at Zero Bias Junction Capacitance (pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage (%) 0.1 0.1 µs IPPM - Peak Pulse Current, % IRSM PPPM - Peak Power (kW) 100 75 50 25 1000 VR measured at Stand-Off Voltage, VWM 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 0 0 50 100 150 200 1 10 100 TJ - Initial Temperature (°C) VBR - Breakdown Voltage (V) Figure 2. Pulse Power or Current vs. Initial Junction Temperature Figure 4. Typical Junction Capacitance Document Number: 89056 Revision: 04-Aug-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 New Product TPC6.8 thru TPC43A Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-277A (SMPC) 0.187 (4.75) 0.175 (4.45) 0.016 (0.40) 0.006 (0.15) K 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) 0.026 (0.65) NOM. 2 1 0.047 (1.20) 0.039 (1.00) 0.171 (4.35) 0.167 (4.25) 0.146 (3.70) 0.134 (3.40) Mounting Pad Layout 0.087 (2.20) 0.075 (1.90) 0.189 MIN. (4.80) 0.189 (4.80) 0.173 (4.40) 0.186 MIN. (4.72) 0.268 (6.80) 0.155 (3.94) NOM. 0.030 (0.75) NOM. 0.049 (1.24) 0.037 (0.94) 0.050 MIN. (1.27) 0.084 (2.13) NOM. 0.041 (1.04) 0.053 (1.35) 0.041 (1.05) 0.055 MIN. (1.40) Conform to JEDEC TO-277A www.vishay.com 4 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 89056 Revision: 04-Aug-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1