P6KA6.8 thru P6KA43A Vishay General Semiconductor Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions FEATURES • Patented PAR® construction • Available in uni-directional polarity only • 600 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC ed* t n e Pat DO-204AC (DO-15) *Patent#'s 4,980,315 5,166,769 5,278,094 TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. PRIMARY CHARACTERISTICS VBR 6.8 V to 43 V PPPM 600 W PD 5.0 W IFSM 75 A TJ max. 185 °C MECHANICAL DATA Case: DO-204AC, molded epoxy over passivated junction Molding compound meets UL 94 V-0 flammability rating Base P/NHE3 - RoHS compliant, high reliability/ automotive grade (AEC Q101 qualified) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL (1) VALUE UNIT (Fig. 1) PPPM 600 W Pulse pulse current with a 10/1000 µs waveform (1) (Fig. 3) IPPM See next table A Power dissipation on infinite heatsink at TL = 75 °C (Fig. 5) PD 5.0 W Peak forward surge current, 8.3 ms single half sine-wave (2) IFSM 75 A VF 3.5 V TJ, TSTG - 65 to + 185 °C Peak pulse power dissipation with a 10/1000 µs Maximum instantaneous forward voltage at 50 A (2) Operating junction and storage temperature range Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2 (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 per minute maximum Document Number: 88368 Revision: 20-Oct-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 P6KA6.8 thru P6KA43A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) BREAKDOWN VOLTAGE DEVICE TYPE VBR (1) AT IT (V) MIN. TEST CURRENT IT (A) MAX. STANDOFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (µA) TJ = 150 °C MAXIMUM REVERSE LEAKAGE AT VWM ID (µA) IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) MAXIMUM TEMP. COEFFICIENT OF VBR (%/°C) PEAK PULSE CURRENT P6KA6.8 6.12 7.48 10 5.50 500 1000 55.6 10.8 0.057 P6KA6.8A 6.45 7.14 10 5.80 500 1000 57.1 10.5 0.057 0.061 P6KA7.5 6.75 8.25 10 6.05 250 500 51.3 11.7 P6KA7.5A 7.13 7.88 10 6.40 250 500 53.1 11.3 0.061 P6KA8.2 7.38 9.02 10 6.63 100 200 48.0 12.5 0.065 P6KA8.2A 7.79 8.61 10 7.02 100 200 49.6 12.1 0.065 P6KA9.1 8.19 10.0 1.0 7.37 25 50 43.5 13.8 0.068 P6KA9.1A 8.65 9.55 1.0 7.78 25 50 44.8 13.4 0.068 P6KA10 9.00 11.0 1.0 8.10 10 20 40.0 15.0 0.073 P6KA10A 9.50 10.5 1.0 8.55 10 20 41.4 14.5 0.073 P6KA11 9.90 12.1 1.0 8.92 5.0 5.0 37.0 16.2 0.075 P6KA11A 10.5 11.6 1.0 9.40 5.0 5.0 38.5 15.6 0.076 P6KA12 10.8 13.2 1.0 9.72 2.0 5.0 34.7 17.3 0.076 P6KA12A 11.4 12.6 1.0 10.2 2.0 5.0 35.9 16.7 0.078 P6KA13 11.7 14.3 1.0 10.5 2.0 5.0 31.6 19.0 0.081 P6KA13A 12.4 13.7 1.0 11.1 2.0 5.0 33.0 18.2 0.081 P6KA15 13.5 16.3 1.0 12.1 1.0 5.0 27.3 22.0 0.084 P6KA15A 14.3 15.8 1.0 12.8 1.0 5.0 28.3 21.2 0.084 P6KA16 14.4 17.6 1.0 12.9 1.0 5.0 25.5 23.5 0.086 P6KA16A 15.2 16.8 1.0 13.6 1.0 5.0 26.7 22.5 0.080 P6KA18 16.2 19.8 1.0 14.5 1.0 5.0 22.6 26.5 0.088 P6KA18A 17.1 18.9 1.0 15.3 1.0 5.0 23.8 25.2 0.088 P6KA20 18.0 22.0 1.0 16.2 1.0 5.0 20.6 29.1 0.090 P6KA20A 19.0 21.0 1.0 17.1 1.0 5.0 21.7 27.7 0.090 0.092 P6KA22 19.8 24.2 1.0 17.8 1.0 5.0 18.8 31.9 P6KA22A 20.9 23.1 1.0 18.8 1.0 5.0 19.6 30.6 0.092 P6KA24 21.6 26.4 1.0 19.4 1.0 5.0 17.3 34.7 0.094 P6KA24A 22.8 25.2 1.0 20.5 1.0 5.0 18.1 33.6 0.094 P6KA27 24.3 29.7 1.0 21.8 1.0 5.0 15.3 39.1 0.096 P6KA27A 25.7 28.4 1.0 23.1 1.0 5.0 16.0 37.5 0.096 P6KA30 27.0 33.0 1.0 24.3 1.0 5.0 13.8 43.5 0.097 P6KA30A 28.5 31.5 1.0 25.6 1.0 5.0 14.5 41.4 0.097 P6KA33 29.7 36.3 1.0 26.8 1.0 5.0 12.6 47.7 0.098 P6KA33A 31.4 34.7 1.0 28.2 1.0 5.0 13.1 45.7 0.098 P6KA36 32.4 39.6 1.0 29.1 1.0 5.0 11.5 52.0 0.099 P6KA36A 34.2 37.8 1.0 30.8 1.0 5.0 12.0 49.9 0.099 P6KA39 35.1 42.9 1.0 31.6 1.0 5.0 10.6 56.4 0.100 P6KA39A 37.1 41.0 1.0 33.3 1.0 5.0 11.1 53.9 0.100 P6KA43 38.7 47.3 1.0 34.8 1.0 5.0 9.7 61.9 0.101 P6KA43A 40.9 45.2 1.0 36.8 1.0 5.0 10.1 59.3 0.101 Notes: (1) Pulse test: tp ≤ 50 ms (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88368 Revision: 20-Oct-08 P6KA6.8 thru P6KA43A Vishay General Semiconductor ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.415 54 4000 13" diameter paper tape and reel P6KA6.8AHE3/54 (1) Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 150 Non-Repetitive Pulse Waveform shown in Fig. 3 TA = 25 °C 10 1 IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) 100 0.1 Peak Value IPPM 100 Half Value - IPP IPPM 2 50 10/1000 µs Waveform as defined by R.E.A. td 0 0.1 µs 10 µs 1.0 µs 100 µs 1.0 ms 10 ms 1.0 0 2.0 3.0 td - Pulse Width (s) t - Time (ms) Figure 1. Peak Pulse Power Rating Curve Figure 3. Pulse Waveform 4.0 6000 100 CJ - Junction Capacitance (pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM tr = 10 µs 75 50 25 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Measured at Zero Bias 1000 Measured at Stand-Off Voltage, VWM 100 10 0 0 25 50 75 100 125 150 175 200 1.0 10 100 TJ - Initial Temperature (°C) VBR - Breakdown Voltage (V) Figure 2. Pulse Power or Current vs. Initial Junction Temperature Figure 4. Typical Junction Capacitance Document Number: 88368 Revision: 20-Oct-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] 200 www.vishay.com 3 P6KA6.8 thru P6KA43A Vishay General Semiconductor 200 PPP - Peak Forward Surge Current (A) PD - Power Dissipation (W) 6 60 Hz Resistive or Inductive Load 5 4 3 L = 0.375" (9.5 mm) Lead Lengths 2 1 TL = 75 °C 8.3 ms Single Half Sine-Wave 100 10 0 0 25 50 75 100 125 150 175 1 200 10 100 TL - Lead Temperature (°C) Number of Cycles at 60 HZ Figure 5. Power Derating Curve Figure 6. Maximum Non-Repetitive Forward Surge Current PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AC (DO-15) 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.300 (7.6) 0.230 (5.8) 0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN. www.vishay.com 4 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88368 Revision: 20-Oct-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1