Document 218-1 NT E R R U C H HIG Chip Inductors - 0603HC Series (1608) With their high current ratings and ultra-small size, these chip inductors are ideal for today’s high frequency, low voltage applications like mobile phones. They feature continuous current ratings up to 2.4 Amps DC and will Part number1 0603HC-1N6XJL_ 0603HC-3N6XJL_ 0603HC-3N9XJL_ 0603HC-6N8XJL_ 0603HC-7N5XJL_ 0603HC-10NX_L_ 0603HC-12NX_L_ 0603HC-15NX_L_ 0603HC-18NX_L_ 0603HC-22NX_L_ 0603HC-24NX_L_ Inductance2 Percent (nH) tolerance3 1.6 5 3.6 5 3.9 5 6.8 5 7.5 5 10 5,2 12 5,2 15 5,2 18 5,2 22 5,2 24 5,2 Q min4 24 24 25 35 38 38 38 38 40 42 42 handle transient currents up to 50% higher. At low inductance values, their Q factors are also higher than our standard 0603CS Series. 900 MHz L typ Q typ 1.67 49 3.65 70 3.74 70 6.72 70 7.33 70 9.70 73 12.3 68 15.5 65 19.5 62 24.0 61 25.8 55 1. When ordering, specify tolerance, termination and packaging codes: 0603HC-24NXJLW Tolerance: G = 2% J = 5% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant silver-palladium-platinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: W= 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. 2. Inductance measured at 250 MHz using Coilcraft SMD-A fixture in Agilent/HP 4286 impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured at 250 MHz using Agilent/HP 4291A with Agilent/HP 16193 test fixture. 5. SRF measured using Agilent/HP 8720D network analyzer and Coilcraft SMD-D test fixture. 6. DCR measured on micro-ohmmeter and Coilcraft CCF858 test fixture. 7. Current that causes a 20°C temperature rise from 25°C ambient. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. 1.7 GHz L typ Q typ 1.65 63 3.75 90 3.90 90 7.10 75 7.90 68 10.5 57 14.5 41 17.6 40 25.0 40 31.5 26 35.0 21 DCR max6 Irms7 (Ohms) (A) 0.030 2.4 0.048 2.3 0.054 2.2 0.054 2.1 0.059 2.1 0.071 2.0 0.075 2.0 0.080 1.9 0.099 1.9 0.099 1.8 0.105 1.8 Color code Black Brown Red Orange Yellow Green Blue Violet Gray White Black Designer’s Kit C339 contains 10 of each of all 5% parts Core material Ceramic Terminations RoHS compliant matte tin over nickel over silver platinum-glass frit. Weight 3.3 – 3.7 mg Ambient temperature –40°C to +125°C with Irms current, +125°C to +145°C with derated current Storage temperature Component: –40°C to +155°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 2000 per 7″ reel. Paper tape: 8 mm wide, 1.0 mm thick, 4 mm pocket spacing PCB washing Only pure water or alcohol recommended Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2009 SRF min5 (MHz) 12500 5900 5900 5800 3700 3700 3000 2800 2800 2400 2400 Document 218-1 Revised 10/03/08 Document 218-2 NT E R R U C H HIG 0603HC (1608) Chip Inductors Typical Q vs Frequency Typical L vs Frequency 100 6.8 nH 30 5.6 nH 3.6 90 22 nH 15 nH 80 60 Inductance (nH) Q Factor 70 22 nH 50 40 30 20 15 nH 10 6.8 nH 20 3.6 nH 10 0 0 1 10 100 1000 1 10000 10 100 1000 10000 Frequency (MHz) Frequency (MHz) Irms Derating C B overall 120 H D F I G J F I 110 A 90 80 70 E terminal Terminal wraparound: approx 0.007/0,18 both ends B max D ref Recommended Land Pattern 60 50 A max 40 0.071 0.044 0.040 0.015 0.030 0.013 0.034 0.040 0.025 0.025 inches 25°C Percent of rated Irms 100 30 1,80 1,12 C max 1,02 0,38 E 0,76 F 0,33 G 0,86 H 1,02 I 0,64 J 0,64 mm 20 10 0 -40 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2009 Document 218-2 Revised 10/03/08