LPE-5047 Vishay Dale Surface Mount Transformers/Inductors, Gapped and Ungapped Custom Configurations Available ELECTRICAL SPECIFICATIONS (Multiple winds are connected in parallel) Inductance Range: 10µH to 68000µH, measured at 0.10V RMS @ 10kHz without DC current, using an HP 4263A or HP 4284A impedance analyzer. DC Resistance Range: 0.03 ohm to 24.1 ohm, measured at + 25°C ± 5°C. Rated Current Range: 2.29 amps to .07 amps. Dielectric Withstanding Voltage: 500V RMS, 60Hz, 5 seconds. DIMENSIONS in inches (millimeters) STANDARD ELECTRICAL SPECIFICATIONS Pad Layout MODEL 0.045 [1.14] Pad Dimensions Typical, 10 places Typical 4 places 0.414 [10.52] 0.459 [11.66] Reference Only Dimensional Outline 5 6 0.472 [11.99] Max. 10 1 0.248 [6.30] Max. 0.525 [13.34] Max. 0.437 [11.10] 0.079 [2.01] Typ. IND. SCHEMATIC DCR MAX. RATED* SATURATING** MAX. DC CURRENT CURRENT TOL. LETTER (Amps) (Amps) (Ohms) Ungapped Models 0.79 0.20 N/A A LPE-5047-151NA 150 ± 30% 0.72 0.24 N/A A LPE-5047-221NA 220 ± 30% 0.29 0.65 N/A A LPE-5047-331NA 330 ± 30% 0.59 0.35 N/A A LPE-5047-471NA 470 ± 30% 0.54 0.42 N/A A LPE-5047-681NA 680 ± 30% 0.49 0.51 N/A A LPE-5047-102NA 1000 ± 30% 0.44 0.63 N/A A LPE-5047-152NA 1500 ± 30% 0.40 0.76 N/A A LPE-5047-222NA 2200 ± 30% 0.35 1.00 N/A A LPE-5047-332NA 3300 ± 30% 2.24 0.24 N/A A LPE-5047-472NA 4700 ± 30% 0.21 2.70 N/A A LPE-5047-682NA 6800 ± 30% 3.27 0.19 N/A A LPE-5047-103NA 10000 ± 30% 0.14 6.26 N/A A LPE-5047-153NA 15000 ± 30% 7.58 0.13 N/A A LPE-5047-223NA 22000 ± 30% 0.11 9.50 N/A A LPE-5047-333NA 33000 ± 30% 18.5 0.08 N/A A LPE-5047-473NA 47000 ± 30% 0.07 24.1 N/A A 68000 LPE-5047-683NA ± 30% Gapped Models 2.29 0.03 2.690 B LPE-5047-100MB 10 ± 20% 0.04 2.07 2.230 B LPE-5047-150MB 15 ± 20% 1.68 0.05 1.860 B LPE-5047-220MB 22 ± 20% 1.35 0.09 1.540 C LPE-5047-330MB 33 ± 20% 1.11 0.13 1.300 D 47 LPE-5047-470MB ± 20% 1.01 0.15 1.085 D LPE-5047-680MB 68 ± 20% 0.81 0.24 0.900 D LPE-5047-101MB 100 ± 20% 0.65 0.37 0.740 D LPE-5047-151MB 150 ± 20% 0.53 0.55 0.610 E LPE-5047-221MB 220 ± 20% 0.43 0.85 0.500 E LPE-5047-331MB 330 ± 20% 0.35 1.29 0.420 E LPE-5047-471MB 470 ± 20% 1.96 0.28 0.350 E LPE-5047-681MB 680 ± 20% 0.26 2.38 0.290 E LPE-5047-102MB 1000 ± 20% 0.21 3.66 0.240 E LPE-5047-152MB 1500 ± 20% 0.17 5.47 0.195 E LPE-5047-222MB 2200 ± 20% 0.14 8.48 0.160 E LPE-5047-332MB 3300 ± 20% 0.11 13.2 0.135 E LPE-5047-472MB 4700 ± 20% *DC current that will create a maximum temperature rise of 30°C when applied at + 25°C ambient. **DC current that will typically reduce the initial inductance by 20%. 0.079 [2.01] 0.045 [1.14] IND. (µH) 0.028 [.71] 0.028 [.71] Foot print Diagram UNGAPPED MODELS: Highest possible inductance with the lowest DCR and highest Q capability. Beneficial in filter, impedance matching and line coupling devices. NOTE: Pad layout guidelines per MIL-STD275E (printed wiring for electronic equipment). Tolerances: xx ± 0.01" [± 0.25mm]. xxx ± 0.005" [± 0.12mm]. GAPPED MODELS: Capable of handling large amounts of DC current, tighter inductance tolerance with better temperature stability than ungapped models. Beneficial in DC to DC converters or other circuits carrying DC currents or requiring inductance stability over a temperature range. DESCRIPTION - LPE-5047-102NA LPE MODEL 1000µH INDUCTANCE VALUE 5047 SIZE ± 30% INDUCTANCE TOLERANCE A CORE SAP PART NUMBERING GUIDELINES (INTERNAL) L P E PRODUCT FAMILY 5 0 4 SIZE 7 R Y PACKAGE CODE 1 0 2 INDUCTANCE VALUE N U TOL. CORE See the end of this data book for conversion tables www.vishay.com 104 For technical questions, contact [email protected] Document Number: 34065 Revision 28-Aug-02 LPE-5047 Vishay Dale Surface Mount Transformers/Inductors, Gapped and Ungapped, Custom Configurations Available SCHEMATICS (TOP VIEW) Schematic A Schematic B Schematic C Schematic D Schematic E 6 5 6 5 6 5 6 5 6 5 7 4 7 4 7 4 7 4 7 4 8 3 8 3 8 3 8 3 8 3 9 2 9 2 9 2 9 2 9 2 10 1 10 1 10 1 10 1 10 1 NOTE: Schematic A is for Ungapped LPE Series. ENVIRONMENTAL PERFORMANCE PART MARKING TEST CONDITIONS Thermal Cycling Withstands - 55°C to +125°C Operating Temperature - 55°C to + 125°C* High Humidity 85% Soldering Heat Tested to + 230°C Mechanical Shock Per MIL-STD-202, Method 213 (100G) Vibration Per MIL-STD-202, Method 204 (20G) Solderability Per industry standards *Must be checked in end use application — Vishay Dale — Date code — Marking code (Suffix of model #) — Pin 1 indicator PACKAGING TAPE SPECIFICATIONS: Carrier Tape Type: Conductive. Cover Tape Type: Anti-static. Cover Tape Adhesion to Carrier: 40 ± 30 grams. STANDARDS: All embossed carrier tape packaging will be accomplished in compliance with latest revision of EIA-481 “Taping of Surface Mount Components for Automatic Placement”. REEL SPECIFICATIONS: Diameter (flange): 13" [330.2mm]. Maximum Width (over flanges): 1.197" [30.4mm]. MODEL TAPE WIDTH COMPONENT PITCH UNITS PER 13 INCH REEL LPE-5047 24mm 16mm 600 Tape and Reel Orientation Pin 1 Indicator Cover Tape Carrier Tape Embossed Cavity USER DIRECTION OF FEED Label Area NOTE: Top view shown with cover tape removed. Document Number: 34065 Revision 28-Aug-02 For technical questions, contact [email protected] www.vishay.com 105