LPE-6562 Vishay Dale Surface Mount Transformers/Inductors, Gapped and Ungapped, Custom Configurations Available ELECTRICAL SPECIFICATIONS (Multiple winds are connected in parallel) Inductance Range: 10 µH to 330 000 µH, measured at 0.10 V RMS at 10 kHz without DC current, using an HP 4263A or HP 4284A impedance analyzer DC Resistance Range: 0.03 Ω to 53.7 Ω, measured at + 25 °C ± 5 °C Rated Current Range: 3.00 amps to 0.06 amps Dielectric Withstanding Voltage: 500 V RMS, 60 Hz, 5 seconds DIMENSIONS in inches [millimeters] Pad Layout DCR MAX. RATED* SATURATING IND. IND. SCHEMATIC MAX. DC CURRENT CURRENT** MODEL (µH) TOL. LETTER (Ω) (Amps) (Amps) Ungapped Models (A) LPE6562ER221NU 220 ± 30 % A 0.28 0.90 N/A LPE6562ER331NU 330 ± 30 % A 0.34 0.81 N/A LPE6562ER471NU 470 ± 30 % A 0.40 0.74 N/A LPE6562ER681NU 680 ± 30 % A 0.48 0.67 N/A LPE6562ER102NU 1000 ± 30 % A 0.59 0.61 LPE6562ER152NU 1500 ± 30 % A 0.72 0.55 N/A LPE6562ER222NU 2200 ± 30 % A 0.87 0.50 N/A LPE6562ER332NU 3300 ± 30 % A 1.07 0.45 N/A LPE6562ER472NU 4700 ± 30 % A 1.27 0.41 N/A LPE6562ER682NU 6800 ± 30 % A 1.53 0.38 N/A 1.86 0.34 N/A 10 000 ± 30 % A LPE6562ER103NU N/A A 2.27 0.31 LPE6562ER153NU 15 000 ± 30 % 8.67 0.16 N/A LPE6562ER223NU 22 000 ± 30 % A N/A 33 000 ± 30 % A 10.6 0.14 LPE6562ER333NU A 12.7 0.13 N/A LPE6562ER473NU 47 000 ± 30 % 15.2 0.12 N/A 68 000 ± 30 % A LPE6562ER683NU A 18.5 0.11 N/A LPE6562ER104NU 10 000 ± 30 % A 37.7 0.08 N/A LPE6562ER154NU 150 000 ± 30 % A 45.6 0.07 N/A LPE6562ER224NU 220 000 ± 30 % A 53.7 0.06 N/A LPE6562ER334NU 330 000 ± 30 % Gapped Models (B) LPE6562ER100MG 10 ± 20 % B 0.03 3.09 5.055 LPE6562ER150MG 15 ± 20 % B 0.04 2.79 4.160 LPE6562ER220MG 22 ± 20 % B 0.05 2.26 3.460 LPE6562ER330MG 33 ± 20 % B 0.08 1.81 2.840 LPE6562ER470MG 47 ± 20 % D 0.12 1.48 2.390 LPE6562ER680MG 68 ± 20 % C 0.19 1.20 1.990 0.29 0.98 1.650 LPE6562ER101MG 100 ± 20 % D ± 20 % E 0.45 0.78 1.350 LPE6562ER151MG 150 0.54 0.71 1.115 220 ± 20 % E LPE6562ER221MG 0.57 0.912 ± 20 % E 0.84 LPE6562ER331MG 330 1.24 0.47 0.765 LPE6562ER471MG 470 ± 20 % E 0.637 680 ± 20 % E 1.89 0.38 LPE6562ER681MG 0.31 0.526 LPE6562ER102MG 1000 ± 20 % E 2.91 LPE6562ER152MG 1500 ± 20 % E 4.50 0.25 0.430 LPE6562ER222MG 2200 ± 20 % E 6.90 0.20 0.355 E 10.4 0.16 0.290 LPE6562ER332MG 3300 ± 20 % 15.7 0.13 0.243 LPE6562ER472MG 4700 ± 20 % E * DC current that will create a maximum temperature rise of 30 °C when applied at + 25 °C ambient. ** DC current that will typically reduce the initial inductance by 20 %. UNGAPPED MODELS: Highest possible inductance with the lowest DCR and highest Q capability. Beneficial in filter, impedance matching and line coupling devices. GAPPED MODELS: Capable of handling large amounts of DC current, tighter inductance tolerance with better temperature stability than ungapped models. Beneficial in DC to DC converters or other circuits carrying DC currents or requiring inductance stability over a temperature range. 0.100 [2.54] Typical 4 places 0.545 [13.84] 0.603 [15.32] Reference Only Dimensional Outline 6 5 0.606 [15.39] Max. 1 10 0.335 [8.51] Max. 0.695 [17.65] Max. 0.575 [14.60] 0.100 [2.54] Typ. COMPLIANT STANDARD ELECTRICAL SPECIFICATIONS 0.092 [2.34] Pad Dimensions Typical, 10 places 0.058 [1.47] RoHS 0.028 [0.71] 0.028 [0.71] Foot print Diagram NOTE: Pad layout guidelines per MIL-STD-275E (printed wiring for electronic equipment). Tolerances: xx ± 0.01" [± 0.25 mm]. xxx ± 0.005" [± 0.12 mm]. The underside of these components contains metal and thus should not come into contact with active circuit traces. DESCRIPTION LPE 6562 1000 µH ± 30 % A ER e2 MODEL SIZE INDUCTANCE VALUE INDUCTANCE TOLERANCE CORE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER L P E PRODUCT FAMILY 6 5 6 SIZE 2 E R PACKAGE CODE 1 0 INDUCTANCE VALUE 2 N T TOL. CORE NOTE Series is also available with SnPb terminations by using package code RY for tape and reel (in place of ER) or SM for bulk (in place of EB). Document Number: 34066 Revision: 10-Oct-08 For technical questions, contact: [email protected] www.vishay.com 159 LPE-6562 Surface Mount Transformers/Inductors, Gapped and Ungapped, Custom Configurations Available Vishay Dale SCHEMATIC (TOP VIEW) Schematic A Schematic E Schematic D Schematic C Schematic B 6 5 6 5 6 5 6 5 6 5 7 4 7 4 7 4 7 4 7 4 8 3 8 3 8 3 8 3 8 3 9 2 9 2 9 2 9 2 9 2 10 1 10 1 10 1 10 1 10 1 NOTE: Schematic A is for Ungapped LPE Series ENVIRONMENTAL PERFORMANCE PART MARKING TEST CONDITIONS Thermal Cycling Withstands - 55 °C to + 125 °C Operating Temperature - 55 °C to + 125 °C* High Humidity 85 % Soldering Heat Tested to + 230 °C - Marking code (Suffix of model #) Mechanical Shock Per MIL-STD-202, Method 213 (100G) - Pin 1 indicator Vibration Per MIL-STD-202, Method 204 (20G) Solderability Per industry standards - Vishay Dale - Date code * Must be checked in end use application PACKAGING TAPE SPECIFICATIONS: Carrier Tape Type: Conductive Cover Tape Type: Anti-static Cover Tape Adhesion to Carrier: 40 ± 30 grams STANDARDS: All embossed carrier tape packaging will be accomplished in compliance with latest revision of EIA-481 “Taping of Surface Mount Components for Automatic Placement”. REEL SPECIFICATIONS: Diameter (flange): 13" [330.2 mm] Maximum Width (over flanges): 1.197" [30.4 mm] MODEL TAPE WIDTH COMPONENT PITCH UNITS PER 13 INCH REEL LPE-6562 32 mm 20 mm 300 Tape and Reel Orientation Pin 1 Indicator Cover Tape Carrier Tape USER DIRECTION OF FEED www.vishay.com 160 Label Area For technical questions, contact: [email protected] Embossed Cavity Document Number: 34066 Revision: 10-Oct-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1