Common Mode Chokes CTDLW31S Series From 90 Ω to 600 Ω ctparts.com SPECIFICATIONS CTDLW31SF Please specify “F” for RoHS compliant. Part Number Common Mode Imp. @100MHz Ω) (Ω CTDLW31S_-900T04 DCR Max. Ω) (Ω Rated Current (mA) Rated Volatge (Vdc) Withstand Voltage (Vdc) Insulation Resis. Min. Ω) (Ω 90±25% 0.30 400 50 125 10M CTDLW31S_-161T03 160±25% CTDLW31S_-221T03 220±25% CTDLW31S_-601T03 600±25% 0.40 0.50 0.80 350 350 260 50 50 50 125 125 125 10M 10M 10M PHYSICAL DIMENSIONS Not shown at actual size. Size A B C D Typ. mm inches 3.2±0.2 1.6±0.2 2.0±0.2 0.6 0.125±0.008 0.063±0.008 0.079±0.008 0.024 CHARACTERISTICS Description: SMD Wire Wound Common Mode Choke Coils for Signal Lines Applications: Suitable for radiation noise suppression for any electronic devices. Used to counter common mode noise interferance within high speed signal lines. Applications like: USB 2.0 Line for personal computers and peripheral devices, IEEE1394 line for personal computers, DVC etc and LVDS, panel link line for crystal display panels. Operating Temperature: -55°C to +125°C Testing: Impedance is tested on an HP4287A at 100 MHz Packaging: Tape & Reel Marking: Reels marked with part number. Additional Information: Additional electrical & physical information available upon request Miscellaneous: RoHS Compliant available. Samples available. See website for ordering information. PAD LAYOUT CENTRAL Technologies 04.30.07 Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2007 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice