Power Inductors - Shielded CTIHLP104F Series SPECIFICATIONS Parts are only available ±20% inductance tolerance only *Irms DC current (A) will cause an approximately ΔT of 40°C. **Isat DC current (A) will cause L0 to drop approximately 20%. From .36 µH to 2.5 µH Not shown at actual size. RoHS ctparts.com Part Number Inductance (µH) L Test Freq. (KHz) *Irms Typ. (A) **Isat Typ. (A) DCR Max. Ω) (mΩ CTIHLP104F-R36M CTIHLP104F-R45M CTIHLP104F-R47M CTIHLP104F-R50M CTIHLP104F-R56M CTIHLP104F-R68M CTIHLP104F-R88M 0.36 0.45 0.47 0.50 0.56 0.68 0.88 100 100 100 100 100 100 100 34 33 33 27 27 27 20 42 38 38 32 32 30 27 1.2 1.2 1.2 1.55 1.55 1.55 3.1 CTIHLP104F-1R0M CTIHLP104F-2R5M 1.00 2.50 100 100 20 13 26 13 3.1 6.8 Compliant PHYSICAL DIMENSIONS Size mm inches A B C D Max. Max. Typ. 10.1±0.3 11.6 4.0 3.0 0.39±0.01 0.46 0.15 0.12 B CHARACTERISTICS Description: SMD (shielded) power inductor Applications: High density DC/DC converters. POL converters. High current VRM/VRD for notebooks, Servers, and desktop CPUs. High speed chargers. Operating Temperature: -55°C to +125°C Inductance Tolerance: ±20% Testing: Inductance is tested on an HP4285A at 100KHz, 0.5V Packaging: Tape & Reel Marking: Parts are marked with inductance code Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. A XXX D C Marking: Inductance Code RECOMMENDED LAND PATTERN Unit: mm 3.5 4.0 9.5 09.16.08 CENTRAL TECHNOLOGIES Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2008 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice