Power Inductors - Shielded CTIHLP72F Series From .22 µH to 4.7 µH Not shown at actual size. RoHS ctparts.com SPECIFICATIONS Parts are only available ±20% inductance tolerance only *Irms will cause the coil temp. rise approximately ΔT=40°C without core loss. **Isat will cause L0 to drop approximately 20% typ. Inductance (µH) L Test Freq. (KHz) *Irms Typ. (A) **Isat Typ. (A) DCR Max. Ω) (mΩ CTIHLP72F-R22M CTIHLP72F-R33M CTIHLP72F-R47M CTIHLP72F-R68M .22 .33 .47 .68 100 100 100 100 14 12 11 9 26 18 18 17 5.7 7.0 9.3 13.9 CTIHLP72F-1R0M CTIHLP72F-1R5M CTIHLP72F-2R2M CTIHLP72F-3R3M CTIHLP72F-4R7M 1.0 1.5 2.2 3.3 4.7 100 100 100 100 100 7 4 5 3.25 3 14 12 9 7 5 18 34 46 60 78 Part Number Compliant PHYSICAL DIMENSIONS Size A B C Max. mm inches D Max. E F Max. Max. 7.8 6.86±0.5 7.0 6.47±0.5 2.0 1.8 0.31 0.27±0.02 0.28 0.25±0.02 0.079 0.071 D G H 1.6±0.5 2.1±0.5 0.063±0.02 0.083±0.02 H CHARACTERISTICS G XXX Description: SMD (shielded) power inductor Applications: PDA, Notebook, Desktop, Server applications. High current POL converters. Low profile, high current power supplies. Battery powered devices. DC/DC converters in distributed power systems. DC/DC converter for Field Programmable Gate Array (FPGA). Operating Temperature: -55°C to +125°C Storage Temperature: -55°C to +125°C Inductance Tolerance: ±20% Testing: Inductance is tested on an HP4285A at 100KHz, 0.25V Packaging: Tape & Reel Marking: Parts are marked with inductance code Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. B A F C E Marking: Inductance Code RECOMMENDED LAND PATTERN 7.4 Typ. 3.4 Typ. 3.7 Typ. CENTRAL Technologies 08.01.07 Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2007 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice