BriLux 1W Emitter BTP-89XXCG-XX-X/X Package Dimension [Note 1] Features Highest Lumen Per Watt Long Operational Life White or Black Housing Superior ESD Protection Instant Light (less than 100ns) Compatible to Luxeon’s “Lambertian” Note: Lens is low dome profile Applications Tolerance: Accent Light/Down Light/Spot Light Automotive Exterior/Interior Light Large Area LCD Backlights Reading Light Marine/Miner’s Lighting Portable Flashlight/ General Lighting ± see spec Unit: mm Optical Characteristics at TJ=25ºC, IF=350mA Wavelength (nm) PART NUMBER Emitting Color LED Chip Material Lens CCT (K) Range Color Drive Luminous VIEW Voltage Flux (lm) ANGLE @ 350mA @350mA 2θ1/2 Min Max Typ. Typ. (deg) BTP-89NRCG-XX-X/X Normal Red AlInGaP Water Clear 620 630 2.20V 27 lm 140 BTP-89AMCG-XX-X/X Amber AlInGaP Water Clear 610 620 2.20V 30 lm 140 BTP-89YECG-XX-X/X Yellow AlInGaP Water Clear 585 595 2.20V 25 lm 140 BTP-89BLCG-XX-X/X Blue AlInGaN Water Clear 460 475 3.50V 7 lm 140 BTP-89PGCG-XX-X/X Green AlInGaN Water Clear 515 535 3.20V 25 lm 140 BTP-89WWCG-XX-X/X Warm White AlInGaN Water Clear 2800K 3800K 3.50V 20 lm 140 BTP-89WHCG-XX-X/X AlInGaN Water Clear 5000K 8000K 3.50V 25 lm 140 White Notes: 1) Picture for illustration purpose only. Please refer to outline dimension for actual package size. 2) Flux is measured with the accuracy of ±15%. Please refer to Flux Selection Guide 3) CCT is measured with the accuracy of ± 400K. Please refer to CCT Selection Guide 4) VF is measured with the accuracy of ± 0.15V. Please refer to VF Selection Guide Part No.: BTP-89XXCG-XX-X/X Page 1 of 6 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Lambertian Emitter BTP-89XXCG-XX-X/X Absolute Maximum Ratings at TJ=25ºC Parameter Red/Amber/Yellow White/Blue/Green 0.77 1.22 350 350 1000 1000 Average Forward Current (mA) 350 350 Reverse Voltage (V) 5 5 Reverse Current (uA) 50 50 2,000 2,000 125 125 Thermal Resistance Junction to Board (°C/W) 15 15 Temperature Coefficient of VF (mV/°C) -2 -2 Storage Temperature (°C) -40 to +120 -40 to +120 Operating Temperature (°C) -30 to +110 -30 to +110 Power Dissipation (W) [1] DC Forward Current (mA) Peak Pulsed Forward Current (mA) [4] ESD Sensitivity (V) [2] LED Junction Temperature at 350mA (°C) Lead Soldering Temperature (°C)[4] [3] 240°C for 5 seconds max 240°C for 5 seconds max Application Notes: 1. Proper forward current must be observed to maintain the junction temperature below maximum rating 2. Although all products listed are class one ESD protection (+/- 2KV by HBM mode), care must be fully taken when handling products 3. Specification is subjected to change for improvements without notice. 4. Test conditions: tp≤10us, duty cycle = 0.005 5. CAUTION: When lighting up, the emitter will become very hot if it is not attached to a heat sink. Please provide proper heat management to prevent damage to the emitter. Part No.: BTP-89XXCG-XX-X/X Page 2 of 6 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Lambertian Emitter BTP-89XXCG-XX-X/X CCT, Flux and VF Selection Guide (@ IF=350mA) BTP-89XXCG-XX-X/W/B White Housing (Optional: B=Black) Wavelength Ranks Selection Color Blue Green Red Amber Yellow Bin B5 B6 B7 XX G6 G7 G8 G9 XX XX XX XX Flux Ranks Selection λD(nm) Min Max 460 465 465 470 470 475 460 – 475 515 520 520 525 525 530 530 535 515 – 535 620 – 630 610 – 620 585 – 595 CCT Ranks Selection Color Temp Warm White White Bin 00 01 XX 02 03 04 XX Color Blue Red Amber Yellow Green White Bin Flux (lumens) H 4.5~6 J 6~8 K 8~10 X Default Full Range M 14~18 N 18~23 P 23~30 Q 30~39 R 39~50 X Default Full Range VF Ranks Selection CCT(K) Min Max 2800 3300 3300 3800 2800K – 3800K 5000 6000 6000 7000 7000 8000 5000K – 8000K Color Red Amber Yellow White Blue Green Bin VF (V) Min Max V04 V05 V06 V07 VXX(Full) V08 V09 V10 V11 V12 VXX(Full) 2.0 2.2 2.2 2.4 2.4 2.6 2.6 2.8 2.0~2.8 2.8 3.0 3.0 3.2 3.2 3.4 3.4 3.6 3.6 3.8 2.8~3.8 (Please specify on order, otherwise, default full range of VF) Part No.: BTP-89XXCG-XX-X/X Page 3 of 6 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Lambertian Emitter BTP-89XXCG-XX-X/X R e la t iv e I n t e n s it y (% ) Typical Radiation Pattern for Lambertian Emitter 100 90 80 70 60 50 40 30 20 10 0 -100 -80 -60 -40 -20 0 20 40 60 80 100 Angular Displacement(Degree) Fig. 1 Typical Radiation Pattern Fig. 2 Forward Current vs Ambient Temperature Part No.: BTP-89XXCG-XX-X/X Page 4 of 6 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Lambertian Emitter BTP-89XXCG-XX-X/X G Fig. 3. Forward Current vs Forward Voltage Fig. 4 Forward Current vs Luminous Flux Part No.: BTP-89XXCG-XX-X/X Page 5 of 6 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Lambertian Emitter BTP-89XXCG-XX-X/X Important Notes: z The information contained herein is presented only as a Guide for the application of our products. Brilliance Technologies assumes no responsibility for any infringement of intellectual property or other rights of the third parties which may result from its use. z Brilliance Technologies continually improves the quality of our products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsible of the customer, when using Brilliance Technologies products, to comply with the standard of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such Brilliance Technologies products cause loss of human life, bodily injury or damage to property. z Brilliance Technologies products listed in this data sheet are intended for usage in general electronics and/or non-commercial or industrial lighting products. These products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury. z In developing your design, please ensure that Brilliance Technologies products are used within specified operating ranges as set forth in the most recent Brilliance Technologies data sheets. BT-Rev. 1.0B20040917 Specifications are subject to change for improvement without notice. Copyright © 2003 Brilliance Technologies Co., Ltd. All rights reserved. Part No.: BTP-89XXCG-XX-X/X Page 6 of 6 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com