EMCORE 6925WD-SDSP

CWDM
Force
Model 6925
• Request Pricing
Optical Broadcast Systems
• Download User Manual
Coarse Wavelength-division Multiplexer
Model 6925 offers low insertion
loss and polarization-dependent
loss.
High channel-to-channel
uniformity allows excellent
stability and reliability.
Great for use in high-speed
communication and long-haul
telecommunication networks.
Model 6925 CWDM
Extends the capacity of existing
networks.
The Force Model 6925 Coarse Wavelength-division Multiplexer (CWDM) is an all-fiber, bidirectional
multiplexer/demultiplexer. The CWDM allows four, six, or eight channels to be stacked in the 1550 nm region of optical fiber.
The Model 6925 features low insertion loss and low polarization-dependent loss. The units operate using single-mode fiber,
and may be configured for unidirectional or bidirectional four, six, or eight channel transmission. The Model 6925
implements higher channel-to-channel isolation to ensure that no interference occurs between channels in a bidirectional
configuration. CWDM technology increases the capacity of the embedded fibers, allowing multiple video, audio, and data
channels to be transmitted over one fiber, while maintaining system performance and enhancing transport systems. The
Model 6925 is an excellent choice for addressing the increased need for efficient and capable data transmission.
Model 3000
Tx, 1511 nm
Model 3000
Tx, 1531 nm
Model 3000
Tx, 1551 nm
Model 3000
Tx, 1571 nm
Model 3000
Rx, 15114 nm
Transmission
Fiber (35 km)
6925WM-SDSP/4
CWDM Mux
Model 3000
Rx, 1531 nm
6925WM-SDSP/4
CWDM Mux
Model 3000
Rx, 1551 nm
Model 3000
Rx, 1571 nm
825 Park Street, Christiansburg, VA 24073 • USA (800) 732-5252 • TEL (540) 382-0462 • FAX (540) 381-0392 •[email protected] • www.forceinc.com
© 2005 by Force, Incorporated. Force, Incorporated reserves the right to make changes to the product described in this document in the interest of product improvement. All rights reserved.
Specifications and Ordering Information
Optical Characteristics*
Min
Optical Characteristics cont.*
Typ
Max
Units
Min
4 Channel Models
Center Wavelengths
0.5 dB Passband
Ripple of Passband
Insertion Loss
Channel Uniformity (1)
Isolation of Adjacent Ch.
Isolation of Non-Adjacent Ch.
Directivity
Polarization Dependent Loss
Return Loss
PMD
Thermal Stability
Optical Power
1511, 1531, 1551, 1571
15
0.4
2.0
2.5
1.2
25
40
55
0.1
45
0.1
0.006
250
nm
dB
dB
dB
dB
dB
dB
dB
dB
dB
ps
dB/°C
mW
1471, 1491, 1511, 1531
1551, 1571
CW ±7
0.3
2.8
3.4
1.2
28
40
50
0.2
45
0.1
0.006
250
nm
nm
dB
dB
dB
dB
dB
dB
dB
dB
ps
dB/°C
mW
8 Channel Models
Center Wavelengths
Typ
Max
1471, 1491, 1511, 1531
1551, 1571, 1591, 1611
15
0.4
3.6
4.5
1.5
25
40
55
0.2
45
0.1
0.007
250
0.5 dB Passband
Ripple of Passband
Insertion Loss
Channel Uniformity (1)
Isolation of Adjacent Ch.
Isolation of Non-Adjacent Ch.
Directivity
Polarization Dependent Loss
Return Loss
PMD
Thermal Stability
Optical Power
Units
nm
nm
dB
dB
dB
dB
dB
dB
dB
dB
ps
dB/°C
mW
6 Channel Models
Center Wavelengths
0.5 dB Passband
Ripple of Passband
Insertion Loss
Channel Uniformity (1)
Isolation of Adjacent Ch.
Isolation of Non-Adjacent Ch.
Directivity
Polarization Dependent Loss
Return Loss
PMD
Thermal Stability
Optical Power
(1)
Environmental and Physical Characteristics*
Min
0
-40
5
Operating Temp. Range
Storage Temp. Range
Humidity
Weight
Typ
Max
+65
+85
90
5.5
2.4
19.0 x 1.75 x 11.8
483 x 45 x 300 mm
Dimensions
Units
°C
°C
%
lbs
kg
in.
Channel uniformity is given at the center wavelength.
Model 6925 CWDM Front and Rear Panel Views
CWDM and Optical Jumper P/N
CWDM Options
4-ch.
6-ch.
8-ch.
Mux, 1RU, SC/APC Conn.
6925WM-SDSP/4
6925WM-SDSP/6
6925WM-SDSP/8
Demux, 1RU, SC/APC Conn.
6925WD-SDSP/4
6925WD-SDSP/6
6925WD-SDSP/8
Optical Jumper Options
1 Meter
3 Meters
SM Optical Jumper, SC/APC Conn.
8000-0241-03
8000-0241-04
*System performance specifications indicated for use with single-mode fiber. Contact Force for complete performance specifications.
Rev. 2.4, 01/25/05
Force
Optical Broadcast Systems
825 Park Street, Christiansburg, VA 24073
USA (800) 732-5252 • TEL (540) 382-0462 • FAX (540) 381-0392
[email protected] • www.forceinc.com
© 2005 by Force, Incorporated. Force, Incorporated reserves the right to make changes to the product described in this document in the interest of product improvement. All rights reserved.