COMPONENTS PRODUCT INFORMATION NEW CONNECTOR nano SIM Card Connector MB-0282-1 August 2014 SF72 Series RoHS Compliant <<Outline>> Smartphones and tablet PC that equip nano SIM (4FF SIM) cards are increasing in these days. The SF72 Series is a push-push type nano SIM card connector ideal for those applications. (SIM: Subscriber Identity Module) Features 1.25mm height, 11.2mm width, and 14.35mm depth, industry’s lowest-in-class height and smallest-in-class dimensions among the same type of connectors. Maintaining good operability with the enlarged card eject length (3.9mm). With card mis-insertion measure and card detection switch (normal open). Structure that enables visual check of terminal area after SMT mounting. Balanced EMI countermeasure through 8 hold-down points. Pb-free, halogen-free compliant product. Supports automated mounting with embossed tape. General Specifications No. of Contacts: 6 pos. Rated Current: 0.5A / terminal Contact Resistance: 100m Ω max. (initial) Rated Voltage: 10V / terminal Dielectric Withstanding Voltage: AC500Vr.m.s for 1 minute Durability: 5,000 times Operating Temperature: -25 Deg. C to +85 Deg. C JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 1/5 MB-0282-1 Materials and Finishes Component Material Finish Signal Contact D-SW Contact Copper Alloy Au plating over Ni (Contact area) Au flash plating over Ni (Terminal area) Housing Synthetic resin Cover Stainless steel Eject Bar Synthetic resin Spring Stainless steel Cam Follower Stainless steel Au flash plating (Terminal area only) Ordering Information SF72 S 006 V B A (R2500) Series Connector Type S: NON-ZIF structure No. of Contacts Reeled Product (Note1) Modification Code Plating Specification B: Au / Au flash plating Connection Type V: With Hold-down for SMT mounting Note 1: An embossed tape reel contains 2,500 pieces. For emboss taping specifications, please contact us directly. JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 2/5 MB-0282-1 Part Number SJ Drawing No. SF72S006VBA SJ114535 Unit: mm TABLE 1 CIRCUIT Note1: The drawing above is for reference only. Please refer to our latest product drawing when using this product. JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 3/5 MB-0282-1 Unit: mm Applicable PWB Dimensions TABLE 2 PIN ASSIGNMENT Note1: The drawing above is for reference only. Please refer to our latest product drawing when using this product. JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 4/5 MB-0282-1 Technical Documents Part Number SF72S006VBA SJ Drawing No. Individual Product: SJ114535 Reeled Product: SJ114536 Specifications JACS-11019 Handling Instructions JAHL-11019 Notice: 1. The values specified in this brochure are only for reference. The products and their specifications are subject to change without notice. Contact our sales staff for further information before considering or ordering any of our products. For purchase, a product specification must be agreed upon. 2. Users are requested to provide protection circuits and redundancy circuits to ensure safety of the equipment, and sufficiently review the suitability of JAE's products to the equipment. 3. The products presented in this brochure are designed for the uses recommended below. We strongly suggest you contact our sales staff when considering use of any of the products in any other way than the recommended applications or for a specific use that requires an extremely high reliability. (1) Applications that require consultation: (i) Please contact us if you are considering use involving a quality assurance program that you specify or that is peculiar to the industry, such as: Automotive electrical components, train control, telecommunications devices (mainline), traffic light control, electric power, combustion control, fire prevention or security systems, disaster prevention equipment, etc. (ii) We may separately give you our support with a quality assurance program that you specify, when you think of a use such as : Aviation or space equipment, submarine repeaters, nuclear power control systems, medical equipment for life support, etc. (2) Recommended applications include: Computers, office appliances, telecommunications devices (terminals, mobile units), measuring equipment, audiovisual equipment, home electric appliances, factory automation equipment, etc Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2882 FAX: +81-3-3780-2946 * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 5/5