OTS-1L Wideband Optical Link Optiva® SERIES Professional Media Transport SATCOM 50MHz to 3000MHz Wideband Optical Link Optiva® Wideband fiber-optic links are optimized to perform in the 50 to 3000 MHz frequency range providing transparent signal transportation for satellite antenna applications. The unique features of the OTS-1LT series include simple push button peaking for optimum performance and our patent-pending SmartGain™ Control, which ensures consistent performance over varied signal conditions. As with all Emcore optical products, the highest quality components and modern production Features atures techniques insure that intra-facility links provide the highest performance as a 50 to 3000 MHz optimized for IF, L and S band cost-effective alternative to coaxial cable. They provide much longer satellite signals transmission distances than copper cables, simplify network design, ease 30dB adjustable gain range provides installation and even enhance immunity from EMI, RFI and lightning. These perfect level match for signal distribution transmitters and receivers take the high RF performance and diverse features of Emcore’s Ortel technology and combine them into a compact package Unique peak optimizer and SmartGain™ control 50 & 75 Ohm BNC or 50 Ohm SMA Tx & Rx RF power monitors via LED, SMA & compatible with the Optiva® OT-CC-16 chassis. System Design Optiva® is a completely modular hot-swappable platform. Both 19” rack remote mount and compact tabletop or wall-mountable enclosures are available. The LNB power 19” rack-mount enclosure (Model OT-CC-16) can support up to 16 insert cards SNMP monitoring and control and provides a single power supply (Model PS-200), or a dual-redundant, High-dynamic-range, optically-isolated DFB hot-swappable power supply option. Compact enclosures are available with 1, 2 or 4 slots. The one slot (OT-DTCR-1) and two slot (OT-DTCR-2) enclosures lasers run cooler and require less power both use an external power supply (PS-9012) and optionally have a standard Fits in Optiva® enclosures, which support 2-pin DC power connector for more custom applications. The four-slot 1 RU Daisy Chain™ video, audio and data links. enclosure (OT-CC-4) uses an integrated power supply. The Optiva® family’s existing wide range of video, audio and data transport products include a Hot swap redundant power supplies unique Daisy-Chain™ feature that multiplexes multiple electrical inputs onto virtually eliminate downtime 16, 4, 2, & 1 slot enclosures available CE & CSA Certified Device a single fiber, thus resulting in an extremely capable, yet conveniently flexible, signal transport system. Transmitter DC to LNB Receiver SL SIN Push button Laser PL PR PhotoDiode SOUT SMON Optimizer SMON Copyright © 2009 Emcore Corporation 626 293 3400 [email protected] www.emcore.com OTS-1L Wideband Optical Link Optiva® SERIES Professional Media Transport SATCOM Performance Highlights Typical S21 Parameter Link Min Typical Max Units Frequency Range 50 Ohm 75 Ohm 50 50 - 3000 2500 MHz MHz Fiber Distance 0 - 20 Km Optical Loss 0 - 8 dBo Air Temperature TXz RX -10 - 50 ˚C RF Input within SGC range1 - 0 to -35 - dBm TX Gain (TG) at max, 1 GHz2 0 8 - dB (W/A) TG Adjustment Range (reduction from max) 30 - - dB Noise Figure (TG at max, 2150 MHz, 1dBo loss) 19 13 - dB Spur Free Dynamic Range (1dBo loss) 100 103-108 - dB/Hz²/³ LNB Voltage Current 16 - 17 - 19 350 V mA Optical Power 3 4 5 dBmo DC Power LNB Off - 12 - 350 V mA - -8 to -25 - dBm RX Gain (RG), at max, 1 GHz 20 22 - dB (A/W) RG Adjustment Range (reduction from max) 15 - - dB Output IP3 (2150 MHz) 20 25 - dBm - 15 - dBm -12 -6 - 10 10 dBmo dBmo - 12 - 250 V mA RF Output (Tx at peak, 1 dBmo into Rx) 2 Output 1dB compression (2150 MHz) Optical Input Optimal DC Power 2 dB per division 3.0 GHz .05 GHz 3.6 GHz OTS-1L (TX & RX) 5.06 in. 128 mm 3 RU TX 1. Wider RF inputs are acceptable, but will set the RF amp gain to its limit. 2. Link RF GaindB = TG + RG – 2*FiberLossdBo (assumes Rin = Rout) RX 3. dBmo & dBo indicate optical power & loss to minimize confusion with RF dBm & dB Enclosure Options Ordering Information Product Code Specifications OTS-1LT/B5-1303-SA-IC Transmitter, 50-3000 MHz, BNC 50 ohm, 1310 nm, 3dBm (min), SC/APC OTS-1LT/B7-1303-SA-IC Transmitter, 50-2500 MHz, BNC 75 ohm, 1310 nm, 3dBm (min), SC/APC OTS-1LT/S5-1303-SA-IC Transmitter, 50-3000 MHz, SMA 50 ohm, 1310 nm, 3dBm (min), SC/APC OTS-1LR/B5-SA-IC Receiver, 50-3000 MHz, BNC 50 ohm, SC/APC OTS-1LR/B7-SA-IC Receiver, 50-2500 MHz, BNC 75 ohm, SC/APC OTS-1LR/S5-SA-IC Receiver, 50-3000 MHz, SMA 50 ohm, SC/APC OPV-CTLR-IC NMS SNMP Controller Card & MIB for Optiva Family OTP-1ETR-A2/A2 Optical Tcvr, 1Ch, Ethernet, SM, Dual LC OT-CC-16-01 Chassis, Rack Mount, 16 Slot, 3RU, Rear Access PS-200-(xx) Power Supply, 12 Vdc, 100 to 240 Vac, 50/60 Hz, (Specify power cord (NA, EU, UK)) OT-CC-4-1U-(xx) Chassis w/ built-in Power Supply, 1 RU, 4 slots, 110- 240 AC input, Power Cord OT-DTCR-1 / OT-DTCR-2 OT-CC-4 OT-DTCR-2 Chassis, flange-mount, w/ Power Supply, 1 slot / 2 slot Information contained herin is deemed to be reliable and accurate as of issue date. Emcore reserves the right to change the design or specifications of the product at any time without notice. EMCORE and the EMCORE logo are trademarks of the EMCORE Corporation. Copyright © 2009 Emcore Corporation OT-CC-16 626 293 3400 FCC OT-DTCR-1 MADE IN PART 15 COMPLIANT USA Document Revision 3/29/2009 [email protected] www.emcore.com