IF Filters for Cordless Phones and ISM-Band Application Series/Type: B8110 The following products presented in this data sheet are being withdrawn. Ordering Code B39111B8110L100 Substitute Product Date of Withdrawal 2004-05-19 Deadline Last Orders 2004-12-31 Last Shipments 2004-03-31 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. The following products presented in this data sheet are being withdrawn: B39111B8110L100 Date of withdrawal: Deadline for last orders: Last shipments: 19−MAY−04 31−DEC−04 31−MAR−04 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of the sales offices are given on the Internet at www.epcos.com/sales. 1 SAW Components Data Sheet B 8110 L SAW Components B 8110 L Bandpass Filter 110,59 MHz Data Sheet duroplast package DIP18D Features ■ ■ ■ ■ ■ ■ ■ IF filter for cordless application Channel selection in DECT system Low group delay ripple Surface Mounted Technology (SMT) Standard IC small outline (SO) package Balanced and unbalanced operation possible no matching required on 50 Ω Terminals ■ Tinned CuFe alloy Dimensions in mm, approx. weight 0,5 g Pin configuration 7 8 16 17 1,4,5,6,9,10, 13,14,15,18 2,3,11,12 Input Input ground or balanced input Output Output ground or balanced output Chip carrier – ground not connected Type Ordering code Marking and Package according to Packing according to B8110L B39111-B8110-L100 C61157-A2-A4 F61074-V8058-Z000 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range Storage temperature range DC voltage Source power TA Tstg VDC Ps –40/+65 –40/+85 0 10 2 ˚C ˚C V dBm May 08, 2001 SAW Components B 8110 L Bandpass Filter 110,59 MHz Data Sheet Characteristics T = +25 ˚C ZS = 50 Ω ZL = 50 Ω Reference temperature: Terminating source impedance: Terminating load impedance: min. typ. max. Nominal frequency fN — 110,59 — MHz Center frequency (center frequency between 10 dB points) fc 110,51 110,59 110,67 MHz Minimum insertion attenuation αmin — 16,5 17,5 dB Passband width B3dB B30dB — — — — MHz MHz Group delay ripple (p-p) fN - 600 kHz ... 1,15 2,57 ∆τ fN + 600 kHz Relative attenuation (relative to αN) fN ± 1,6 MHz ... fN ± 3,1 MHz fN ± 3,1 MHz ... fN ± 4,6 MHz fN ± 4,6 MHz ... fN ± 20 MHz — 180 250 ns 32 40 45 36 52 57 — — — dB dB dB 32 42 48 37 57 63 — — — dB dB dB — 850 || 6,8 100 || 25 — Ω || pF — — Ω || pF — – 18 — ppm/K αrel fN ± 1,728 MHz fN ± 2×1,728 MHz fN ± 3×1,728 MHz Impedance in pass band Input: ZIN = RIN || CIN Output: ZOUT = ROUT || COUT TCf Temperature coefficient of frequency 3 May 08, 2001 SAW Components B 8110 L Bandpass Filter 110,59 MHz Data Sheet Transfer function: Transfer function (pass band): 4 May 08, 2001 SAW Components B 8110 L Bandpass Filter 110,59 MHz Data Sheet Published by EPCOS AG Surface Acoustic Wave Components Division, SAW CE MM PD P.O. Box 80 17 09, D-81617 München EPCOS AG 2001. All Rights Reserved. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, prices and delivery please contact the sales offices of EPCOS AG or the international representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our sales offices. 5 May 08, 2001