IF Filters for Basestations The following products presented in this data sheet are being withdrawn. Ordering Code B39201B3866H510 Substitute Product Date of Withdrawal 2006-12-01 Deadline Last Orders 2007-02-28 Last Shipments 2007-05-31 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. SAW Components Data Sheet B3866 SAW Components B3866 Low-Loss Filter 201,0 MHz Data Sheet Ceramic package DCC12A Features 7,62 Low-loss IF filter for GSM / EDGE base station Channel selection in PCS, DCS systems Temperature stable Balanced and unbalanced operation possible Ceramic SMD package 1,0 1 2 3 4 5 2,3 1,7 ● ● ● ● ● bottom view 10 Terminals 9 8 7 6 3,81 1,6 ● Gold plated side view 6,5 top view 13,3 Dimensions in mm, approx. weight 0,4 g Pin configuration 1, 10 5, 6 3, 8 2, 4, 7, 9 Balanced input Balanced output Ground Case ground Type Ordering code Marking and Package according to Packing according to B3866 B39201-B3866-H510 C61157-A7-A94 F61074-V8163-Z000 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range TA Storage temperature range Tstg DC voltage VDC Source power Ps –30 / +85 –30 / +85 5 0 10 2 ˚C ˚C V V dBm Aug 23, 2002 between terminals 1 and 10 else SAW Components B3866 Low-Loss Filter 201,0 MHz Data Sheet Characteristics Operating temperature range: Terminating source impedance: Terminating load impedance: TA = 0 - 70 ˚C ZS = 80 Ω || 30 nH ZL = 90 Ω || 35 nH min. typ. max. — Nominal frequency fN — 201,0 Minimum insertion attenuation (including matching network) αmin — 4,0 Passband width B3,0dB — αrel ≤ 3 dB Amplitude ripple in passband fN ± 80 kHz ∆αrel Absolute group delay (at fN) τ Group delay ripple (p-p) fN ± 80 kHz ∆τ Relative attenuation (relative to αmin) fN ± 200 kHz ... fN ± 300 fN ± 300 kHz ... fN ± 400 fN ± 400 kHz ... fN ± 700 fN ± 700 kHz ... fN ± 1600 fN ± 1600 kHz ... fN ± 3000 fN ± 3000 kHz ... fN ± 6000 fN ± 6000 kHz ... fN ± 35000 — ±0,2 — 2,2 — 0,7 dB — kHz ±1,0 dB — µs 1,5 µs αrel kHz kHz kHz kHz kHz kHz kHz IM3 level (Input level -17 dBm) fN ± 800 kHz fN ±1600 kHz TCf Temperature coefficient of frequency1) Turnover temperature 1) Temperature dependance of fc: 300 6,0 MHz T0 fc(TA) = fc(T0)(1 + TCf(TA – T0 3 3 13 20 27 30 33 40 8 20 30 40 45 55 55 — — — — — — — — — — — -110 -110 dB dB dB dB dB dB dB dBm dBm — – 0,036 — ppm/K2 — 35 — ˚C )2) Aug 23, 2002 SAW Components B3866 Low-Loss Filter 201,0 MHz Data Sheet Matching network to 200 Ω 4:1 transformers are only required for measurement in a 50 Ω environment (element values depend on PCB layout) Cp1 = 6,8 pF Lp5 = 33 nH Ls2 = 27 nH Ls6 = 27 nH Ls3 = 27 nH Ls7 = 27 nH Lp4 = 33 nH Cp8 = 5,6 pF Lp5 Lp4 4 Aug 23, 2002 SAW Components B3866 Low-Loss Filter 201,0 MHz Data Sheet Transfer function Transfer function (pass band) 5 Aug 23, 2002 SAW Components B3866 Low-Loss Filter 201,0 MHz Data Sheet Published by EPCOS AG Surface Acoustic Wave Components Division, SAW MC IS P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 6 Aug 23, 2002