33 330-003 and 330-004 Pipe Thread Adapter Direct Coupling 330 F S 003 N 16 03-5 CONNECTOR DESIGNATORS * Product Series A-B -C-D-E-F G-H-J-K-L-S Connector Designator Angle and Profile S = Straight Cable Entry (Table III) Shell Size (Table I) Basic Part No. 003 = External Thread 004 = Internal Thread * Conn. Desig. B See Note 3 DIRECT COUPLING A Thread (Table I) Length ± .060 (1.52) F (Table III) GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Back Cover for Complete Finish Information and Additional Finish Options E (Table III) External Tapered Pipe Thread Length ± .060 (1.52) E (Table III) B (Table I) Finish (Table II) TABLE II: STANDARD FINISHES B (Table I) A Thread (Table I) Length Designator (1/2 inch increments: e.g. 5=2.5 inches, Minimum Lengths Table III) See inside back cover foldout or pages 13 and 14 for unabridged Tables I and II. G (Table III) Wrench Flats Typ. (Space Permitting) TABLE III: CABLE ENTRY Dash No. 01 02 03 04 05 06 07 08 09 10 Pipe Thread 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 © 2005 Glenair, Inc. E .391 .593 .593 .781 .812 1.000 1.031 1.031 1.062 1.453 (9.9) (15.1) (15.1) (19.8) (20.6) (25.4) (26.2) (26.2) (27.0) (36.9) F Dia .405 (10.3) .540 (13.7) .675 (17.1) .840 (21.3) 1.050 (26.7) 1.315 (33.4) 1.660 (42.2) 1.900 (48.3) 2.375 (60.3) 2.875 (73.0) G Dia .500 (12.7) .625 (15.9) .875 (22.2) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 1.750 (44.5) 2.125 (54.0) 2.500 (63.5) 3.250 (82.6) CAGE Code 06324 Length Min Desig. 2.0 (50.8) 4 2.0 (50.8) 4 2.0 (50.8) 4 2.5 (63.5) 5 2.5 (63.5) 5 2.5 (63.5) 5 3.0 (76.2) 6 3.0 (76.2) 6 3.0 (76.2) 6 3.0 (76.2) 6 1. Pipe threads per American standard taper pipe thread. 2. Metric dimensions (mm) are indicated in parentheses. 3. When using Connector Designator B refer to pages 18 and 19 for part number development. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 33 - 3