FUJITSU TAKAMISAWA COMPONENT CATALOG POWER RELAY 1 POLE—5 A (MEDIUM LOAD CONTROL) VE SERIES ■ FEATURES ● ● ● ● ● ● ● UL, CSA, VDE recognized 1 form A (SPST-NO) or 1 form C (SPDT) contact Low cost, miniature relay with big performance in small package —Surge strength: 4,000 V or 6,000 V Slim type—meets high density mounting requirement Wide operating range Easy circuit design with completely separated terminal arrangement (coil and contact terminals) Plastic sealed type backfilled with nitrogen ■ ORDERING INFORMATION [Example] VE – 12 (a) (*) (b) H (c) M (d) S (e) E – K – HV – VD (f ) (g) (h) (i) (a) Series Name VE: VE Series (b) Nominal Voltage Refer to the COIL DATA CHART (c) Contact Rating H : Heavy duty type (d) Contact Arrangement Nil : 1 form C (SPDT) M : 1 form A (SPST-NO) (e) Coil Type Nil : Standard type S : High sensitivity type (f) Contact Material (Rating) Nil : Gold overlay silver-nickel (N.C.: 3 A, N.O.: 5 A) E : Silver-nickel (N.C.: 3 A, N.O.: 5 A) 5 : Silver alloy (N.C.: 5 A, N.O.: 5 A) (g) Enclosure K : Plastic sealed type (h) Surge Strength Nil : Standard type (4,000 V) HV: High dielectric strength type (6,000 V) (i) Standard VD: UL, CSA, VDE approved type Note: Actual marking omits the hyphen (-) of (*) 1 VE SERIES ■ SAFETY STANDARD AND FILE NUMBERS UL508 (File No. E56140) C22.2 No. 14 (File No. LR35579) VDE0435 Please note that UL/CSA ratings may differ from the standard ratings. Type Nominal voltage Contact rating VE-H 5 to 48 VDC Normally open: 1/14 HP 125 VAC/250 VAC 5 A 30 VDC/250 VAC, resistive Pilot duty D300 Normally close: 1/14 HP 125 VAC/250 VAC 3 A 30 VDC/250 VAC, resistive Pilot duty D150 VE-HM 5 to 48 VDC 1/12 HP 125 VAC/250 VAC 5 A 30 VDC/250 VAC, resistive Pilot duty D300 VE-H5 VE-HM5 5 to 48 VDC Normally open: 1/10 HP 125 VAC/250 VAC 5 A 30 VDC/250 VAC, resistive Pilot duty D300 Normally close: 1/14 HP 125 VAC/250 VAC 5 A 30 VDC/250 VAC, resistive 2 VE SERIES ■ SPECIFICATIONS VE-( ) HME-K VE-( ) HM-K VE-( ) HE-K VE-( ) H-K VE-( ) HM5-K Arrangement 1 form A (SPST-NO) 1 form C (SPDT) 1 form A (SPST-NO) Material Gold overlay silver alloy Style Single Resistance (initial) (at 1 A 6 VDC) Maximum 70 mΩ (VE-HM, H) Maximum 100 mΩ (VE-HME, HE) Rating (resistive) 5 A 250 VAC Maximum Carrying Current 7A Maximum Switching Power 1,250 VA Maximum Switching Voltage 250 VAC, 150 VDC Maximum Switching Current 5A Minimum Switching Load*1 10 mA, 5 VDC (VE-HM, H), 100 mA 5 VDC (VE-HME, HE, HM5, H5) Nominal Power (at 20°C) Standard type: 0.36 W. High sensitivity type: 0.25 W Operate Power (at 20°C) Standard type: 0.177 W. High sensitivity type: 0.13 W Operating Temperature Standard: –40°C to +85°C. High sensitivity: –40°C to +90°C (no frost) Operate (at nominal voltage) Maximum 10 ms Release (at nominal voltage) Maximum 5 ms Resistance (at 500 VDC) Minimum 1,000 MΩ Item Contact Coil Time Value Insulation between open contacts Dielectric Strength between coil and contacts Life Other VE-( ) H5-K 1 form C (SPDT) Silver-cadmium oxide alloy Maximum 200 mΩ 5 A 250 VAC (N.O.) 3 A 250 VAC (N.C.) 5 A 250 VAC 1,250 VA (N.O.) 750 VA (N.C.) 1,250 VA 5 A (N.O.) 3 A (N.C.) 5A 1,000 VAC 1 minute 750 VAC 1 minute 1,000 VAC 1 minute 750 VAC 1 minute 2,000 VAC 1 minute Surge Strength Standard type: 4,000 V (at 2 × 10 µs) High dielectric strength type: 6,000 V (at 2 × 10 µs) Mechanical 1 × 107 operations minimum Electrical (at Rating) Standard Type: 1 × 105 ops. min. High sensitivity type: 5 × 104 ops. min. Vibration Resistance Misoperation 10 to 55 Hz (double amplitude of 3.3 mm) Endurance 10 to 55 Hz (double amplitude of 3.3 mm) Misoperation 100 m/s2 (11 ±1 ms) Endurance 500 m/s2 (6 ±1 ms) Shock Resistance Weight Approximately 8 g *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 3 VE SERIES ■ COIL DATA CHART High Sensitive Type Standard Type MODEL Nominal voltage Coil resistance (±10%) Must operate voltage Must release voltage Nominal power VE-( ) HM VE-( ) HME VE-( ) H VE-( ) HE VE-( ) HM5 VE-( ) H5 VE- 5H (M) (E)-K VE- 5H (M) (E) 5-K 5 VDC 69 Ω 3.5 VDC 0.25 VDC 360 mW VE- 6H (M) (E)-K VE- 6H (M) (E) 5-K 6 VDC 100 Ω 4.2 VDC 0.3 VDC 360 mW VE- 9H (M) (E)-K VE- 9H (M) (E) 5-K 9 VDC 225 Ω 6.3 VDC 0.45 VDC 360 mW VE 12H (M) (E)-K VE-12H (M) (E) 5-K 12 VDC 400 Ω 8.4 VDC 0.6 VDC 360 mW VE-18H (M) (E)-K VE-18H (M) (E) 5-K 18 VDC 900 Ω 12.6 VDC 0.9 VDC 360 mW VE-24H (M) (E)-K VE-24H (M) (E) 5-K 24 VDC 1,600 Ω 16.8 VDC 1.2 VDC 360 mW VE-48H (M) (E)-K VE-48H (M) (E) 5-K 48 VDC 6,400 Ω 33.6 VDC 2.4 VDC 360 mW VE- 5H (M) S (E)-K VE- 5H (M) S5-K 5 VDC 100 Ω 3.6 VDC 0.25 VDC 250 mW VE- 6H (M) S (E)-K VE- 6H (M) S5-K 6 VDC 145 Ω 4.3 VDC 0.3 VDC 250 mW VE- 9H (M) S (E)-K VE- 9H (M) S5-K 9 VDC 325 Ω 6.5 VDC 0.45 VDC 250 mW VE 12H (M) S (E)-K VE-12H (M) S5-K 12 VDC 575 Ω 8.6 VDC 0.6 VDC 250 mW VE-18H (M) S (E)-K VE-18H (M) S5-K 18 VDC 1,300 Ω 13.0 VDC 0.9 VDC 250 mW VE-24H (M) S (E)-K VE-24H (M) S5-K 24 VDC 2,310 Ω 17.3 VDC 1.2 VDC 250 mW VE-48H (M) S (E)-K VE-48H (M) S5-K 48 VDC 9,220 Ω 34.7 VDC 2.4 VDC 250 mW Note: All values in the table are measured at 20 °C. ■ CHARACTERISTIC DATA 4 VE SERIES ■ REFERENCE DATA 5 VE SERIES ■ DIMENSIONS ● Dimensions ● Schematics (BOTTOM VIEW) VE-M type ● PC board mounting hole layout (BOTTOM VIEW) VE type Unit: mm Fujitsu Takamisawa International Headquarter Offices www.fujitsu.takamisawa.com Japan Fujitsu Takamisawa Component Limited Global Marketing and Sales Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 North and South America Fujitsu Takamisawa America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Europe Fujitsu Takamisawa Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Asia Pacific Fujitsu Takamisawa Asia Pacific Pte. Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 6