The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Interface Connectors for Factory Automation Network HR31 Series Complies with Device Net requirements Comparison of plug heights (actual size) 10.2 ●Hirose HR31 15 ●Other manufacturer’s product ■ Features 1. Device-Net Compliant Conforms to requirements of Factory Automation Network Device-Net standards. Hirose products are distinct from products of made others, as described below. Feature Made by others Hirose HR31 Reduced number of termination operations Crimped to commercially available cap connectors, inserted into housing and fastened by screw. Crimped and connected to terminal then fastened simply by inserting into housing. High density mounting Plug height : 15 mm Plug height is 10.2 mm, allowing use of less space when mounting several connectors Prevention of connection errors Contact positions not identified. Permanently identified contact positions Number of required operations to secure receptacle assembly to the board Connectors are attached by screws from the opposite side. No need for screws, built-in locking pin secures connector to the board 2 Locking features Total space occupied by mated assemblies The connectors can be supplied with either of the following locking features: -Screw lock, using attached screws. -Snap lock, using built-in feature with a definite click-sensation. With screw lock 12 27 3 4 27.4 10.2 27 3 4 20 5 20 5 10.2 When fully inserted, the plug contacts are fully protected by the walls of the insulator body eliminating a risk of accidental damage. 35.5 4. Prevention of deformation of the contacts 12 Without screw lock 1 2 Use crimp tools conforming to JIS C 9711 standards. Terminated contacts can be removed using 1 mm dia. steel pin. and re-inserted. 1 2 3. Commercially available tools may be used ■ Applications Power units and communications units of factory automation related devices 2006.8 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ■ Product Specifications 12A (2.5mm2 wire) 10A (1.5mm2 wire) 250V AC, 350V DC Current rating Rating Voltage rating Item Operating temperature range -40ç to +100ç Storage temperature range -40ç to +85ç (Note 2) Specification Conditions 1.Contact resistance 5 m ohms max. 1A DC 2.Insulation resistance 1000 M ohms min. 500 V DC 3.Withstanding voltage No flashover or insulation breakdown 2000V AC/one minute 4.Impulse withstanding voltage No flashover or insulation breakdown Standard waveform of 4KV, positive/negative, 3 times each 5.Vibration No electrical discontinuity of 10 µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 5 min. in each of the 3 directions, 10 cycles each 6.Durability (insertion/ withdrawal) Contact resistance: 10 m ohms max. 1000 cycles 7.Temperature cycle Insulation resistance: 1000 M ohms min. Temperature: -40ç / Room temperature to +100ç / Room temperature Time: 30 / 10 to 15 / 30 / 10 to 15 (Minutes) 5 cycles 8.Humidity Insulation resistance: 10 M ohms min. (Humidity state) 100 M ohms min. (Dry state) 96 hours at temperature of 40ç and humidity of 90% to 95% ■ Materials Part Plug Crimp contact Material Finish Insulator PBT Color: Black or Green Screw Steel Nickel plating Socket contact Contact area: phosphor bronze Termination area: copper Contact area: gold plating Termination area: tin plating Insulator PBT Color: Black or Green Male contact Brass Contact area: gold plating Termination are: gold plating Nut Steel Nickel plating Board retention pin Phosphor bronze Tin plating Receptacle Remarks UL94V-0 UL94V-0 ■ Ordering information ●Connector HR31 - 5.08 P A - 5 S C (01) 1 1 Series name 2 Contact pitch 3 Connector type 4 Screw lock type 5 No. of contacts 2 3 4 5 6 7 8 6 Contact type S: Female contact P: Male contact 7 Terminal type C: Crimping DL: Right angle through hole type D: Straight through hole type 8 Color, plating, board retention pin type HR31 5.08mm P: Plug R: Receptacle Blank: With screw A: Without screw 5 ●Crimp contact HR31 - SC - 1 1 1 (01) 9 9 10 11 12 2 10 11 12 Series name HR31 Contact type SC: female contact Contact packaging type 1: loose contact Conductor cross area 1: 1.04 to 2.63mm2 2: 0.25 to 1.65mm2 13 14 13 Plating type 1: Gold plating 14 Suffix The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ■ Plug (with screw lock) 27 8.3 28.3 1 2 3 4 5 10.2 25.4 35.5 HR31-5.08P-5SC Part No. CL No. Weight HR31-5.08P-5SC(71) 131-0002-2-71 HR31-5.08P-5SC(72) 131-0002-2-72 Color 8g Plug (without screw lock) RoHS Black YES Green 27 2 3 4 5 8.3 28.3 1 10.2 25.4 HR31-5.08PA-5SC Part No. CL No. HR31-5.08PA-5SC 131-0009-1 HR31-5.08PA-5SC(01) 131-0009-1-01 ■ Crimp contact Weight Color Black 6g B RoHS YES Green B-B 2.35 ØA 23 B Part No. CL No. ØA HR31-SC-111(71) 131-0004-8-71 4 HR31-SC-121(71) 131-0005-0-71 3.3 Weight Contact plating Applicable conductor cross area (Note 2) 1.04 to 2.63mm RoHS 2 1g Gold 0.2 to 1.65mm2 YES Note 1: Bag packaging (100 pieces/bag) Note 2: For a multi-strand conductors 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ■ Receptacle (Right angle through hole type with screw lock) Contact plating 8.6 35.5 1 2 3 4 12 5 3.3 3 7.5 10 HR31-5.08R-5PDL Part No. CL No. HR31-5.08R-5PDL(72) 131-0001-0-72 HR31-5.08R-5PDL(74) 131-0001-0-74 HR31-5.08R-5PDL(75) 131-0001-0-75 HR31-5.08R-5PDL(76) 131-0001-0-76 Weight Color Contact plating Board retention pin RoHS With Black Without 4g Gold With Green YES Without Receptacle (Right angle through hole type without screw lock) Contact plating 27.4 2 3 4 5 3 8.6 1 12 3.3 10 HR31-5.08RA-5PDL Part No. CL No. HR31-5.08RA-5PDL(72) 131-0008-9-72 HR31-5.08RA-5PDL(74) 131-0008-9-74 HR31-5.08RA-5PDL(75) 131-0008-9-75 HR31-5.08RA-5PDL(76) 131-0008-9-76 Weight 10.25 Color Contact plating Board retention pin Black 2g Without Gold With Green Without BPCB mounting pattern le) h ho roug (Th gh te) hrou (No .3 +00.1 (T 2 Ø 2- 5.08±0.05 5.08±0.05 10.16±0.05 10.16±0.05 15.24±0.05 ) hole (N te) o .3 Ø2 2- .1 +0 0 (T u hro gh ho .1 +0 0 le) ugh e) hol ro (Th 6 Ø1. 5- 10±0.05 +0.1 0 10 ±0.05 1.6 5-Ø ● Without screw lock 10.25±0.05 7.5±0.05 ● With screw lock 5.08±0.05 5.08±0.05 10.16±0.05 10.16±0.05 15.24±0.05 Connector mounting side (Board thickness =1.6) 12.6±0.05 12.6±0.05 Connector mounting side (Board thickness =1.6) Note: Dia. 2.3 through hole is not required on the board when using connectors without the retention pin. 4 RoHS With YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ■ Receptacle (Straight through hole type with screw lock) 35.5 2 3 4 5 3.8 8.6 1 3 4.3 12 Connector mounting side B HR31-5.08R-5PD Part No. CL No. Weight HR31-5.08R-5PD(72) 131-0003-5-72 HR31-5.08R-5PD(74) 131-0003-5-74 HR31-5.08R-5PD(75) 131-0003-5-75 HR31-5.08R-5PD(76) 131-0003-5-76 Color Contact plating Board retention pin RoHS With Black 4g Without Gold With Green YES Without Receptacle (Straight through hole type without screw lock) 8.6 27.4 1 2 3 4 5 3 Connector mounting side B HR31-5.08RA-5PD Part No. CL No. HR31-5.08RA-5PD(72) 131-0016-7-72 Weight HR31-5.08RA-5PD(74) 131-0016-7-74 HR31-5.08RA-5PD(75) 131-0016-7-75 HR31-5.08RA-5PD(76) 131-0016-7-76 Color 12 Contact plating 4.3 Board retention pin RoHS With Black 2g Without Gold With Green YES Without BPCB mounting pattern ● Without screw lock 6 1. -Ø 5 gh rou (Th ho hole hr te) (No 3+00.1 (T Ø2. 2 5.08±0.05 5.08±0.05 10.16±0.05 10.16±0.05 15.24±0.05 ) h oug 15.24±0.05 5±0.05 .1 +0 0 le) 3.8±0.05 3.8±0.05 ● With screw lock (N ) .1 (T ote .3+00 Ø2 2- u hro ho gh .1 +00 gh u hro le) ho (T .6 Ø1 5- 5.08±0.05 5.08±0.05 10.16±0.05 10.16±0.05 12.6±0.05 12.6±0.05 Connector mounting side B (Board thickness =1.6) le) Connector mounting side B (Board thickness =1.6) Note: Dia. 2.3 through hole is not required on the board when using connectors without the retention pin. 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ■ Tools Part No. CL No. Manual crimp tool HR31-TC-01 150-0217-7 Contact removal pin HR31-SC-TP 150-0215-1 Type Manual crimp tool Contact removal pin ● Tools application procedures 1. Manual contact crimp tool The tool will terminate all specified crimp contacts. Placement of correct contact in corresponding crimp position on the tool is critical. The positions are clearly indicated on the tool as (2) and (1.25). The exposed conductor strip length is 5mm. Crimp position indicator Applicable crimp contact 2 HR31-SC-113 or HR31-SC-111 1.25 HR31-SC-123 or HR31-SC-121 2 1.25 Crimp position indicator 2. Contact removal pin Contact removal pin provides easy method of contact removal from plug assembly. 1) Fully insert the long end of the contact removal pin into the opening in the insulator. 2) Move the pin forward, in the direction of the mating face. This will cause the terminated contact to move in opposite direction. 3) Pull out the wire with the attached crimped contact. Molded-in lance Molded-in lance Wire Wire Pull-out Insertion direction Contact removal pin 6 Contact removal pin The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. B Usage Precautions 1. To prevent damage, align receptacle with the panel and board in such a way that it is not subject to excess loads. 1.1 Recommended mounting panel dimensions (right angle through hole type) Panel Part No. A 5 min. +0.2 16.6 ±0.1 3.2 0 A HR31-5.08R-5PDL(**) 36 +0.2 +0 HR31-5.08RA-5PDL(**) 27.9 +0.2 +0 +0.2 11 0 7.8 +0.2 0 +0.2 2 0 Board 1.2 Recommended mounting panel dimensions (straight through hole type) Panel 5 min. B Part No. 16.6 ±0.1 3.2 HR31-5.08RA-5PD(**) 27.9 +0.2 +0 11+0.2 0 36 +0.2 +0 0.2+0.2 0 7.8 +0.2 0 2 +0.2 0 B HR31-5.08R-5PD(**) 2. Insert the crimp contact into the plug in the direction shown below. Crimp contact Wire 3. Use a number 0 cross drive bit to tighten the screw lock’s screw. 4. Assure that the circuit’s power is off when mating and un-mating connectors. 7