Wire Bondable Resistor/Capacitor Circuits WBC-RC Series • Integrated resistor and capacitor • Proven IRC TaNSil® technology • 3 types - AC Terminator, Tapped and T-Filter Electrical Data AC Termination T-Filter Tapped Filter Resistance Value 47Ω 100Ω 33Ω Capacitance Value 47pF 80pF 47pF Resistance ±10% Capacitance ±20% Absolute Tolerance Resistance ±150ppm/°C Capacitance ±200ppm/°C Absolute TCR Package Power Rating 250mW Resistor Element Power Rating 125mW Capacitor Breakdown Voltage Operating Temperature 25V -55°C to +125°C Resistor Noise <-25dB Substrate Material Silicon Substrate Thickness Bond Pad Metallization Backside Passivation 0.010˝ ±0.001 (0.254mm ±0.025) Aluminum: 10KÅ minimum 3KÅ Gold minimum Silicon Dioxide or Silicon Nitride General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com A subsidiary of TT electronics plc WBC-RC Series Issue January 2009 Sheet 1 of 3 Wire Bondable Resistor/Capacitor Circuits Physical and Schematic Data 1 0.029˝± 0.001 0.635mm ± 0.025 DSOT23V AC Termination Back of chip DSOT23T T-Filter Back of chip DSOT23R Tapped Filter Back of chip 2 0.035˝± 0.001 0.889mm ± 0.025 1 1 2 2 1 2 Power Derating Data © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com WBC-RC Series Issue January 2009 Sheet 2 of 3 Wire Bondable Resistor/Capacitor Circuits Environmental Data (Resistor) Method Max ∆R Typical ∆R Thermal Shock MIL-STD-202 Method 107 Test condition F ±0.1% ±0.02% High Temperature Exposure MIL-STD-883 Method 1008 150°C, 1000 hours ±0.1% ±0.05% -55°C, 1000 hours ±0.03% ±0.01% Life MIL-STD-202 Method 108 70°C, 1000 hours ±0.5% ±0.01% Life at Elevated Temperature MIL-STD-202 Method 108 125°C, 1000 hours ±0.5% ±0.05% Test Low Temperature Storage Environmental Data (Capacitor) Method Max ∆C Thermal Shock MIL-STD-202 Method 107 Test condition F ±0.25% + 0.25pF max Moisture Resistance MIL-STD-202 Method 106 ±1.0% + 0.25pF max Short Time Overload +25°C, 5 seconds 1.5 X rated voltage ±0.25% + 0.25pF max Life at Elevated Temperature MIL-STD-202 Method 108 125°C, 1000 hours ±0.25% + 0.25pF max High Temperature Exposure 100 hours @ 150°C ambient ±0.25% + 0.25pF max Test Ordering Data WBD - DSOT23V - 470 - K Prefix - 470 - M Absolute Capacitance Tolerance M = ±20% Style DSOT23V = AC terminator DSOT23T = T-Filter DSOT23R = Tapped Filter Resistance Code (R) Capacitance Code (C) 3-Digit Capacitance Code Ex: 470 = 47pF Absolute Resistance Tolerance M = ±20%; K = ±10% 3-Digit Resistance Code Ex: 470 = 47Ω Packaging Standard packaging is 2˝ x 2˝ chip tray. For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com WBC-RC Series Issue January 2009 Sheet 3 of 3