SG-LCC DIRECT MOUNT, SOLDERLESS SOCKET FOR TEST APPLICATIONS Features • Wide temperature range (-35C to +100C). • Current capability (up to 50mA per wire). • Easily removable swivel socket lid • Compression plate distributes forces evenly • High speed, reliable Elastomer connection 15.23 4.78 17.50 Recommended Torque 1 in lbs 10.65 Customer Target PCB 3.36 4.78 Description: Socket Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.0254mm [±0.001"], Pitches (from true position) ±0.0762mm [±0.003"], substrate thickness tolerance ±10%, all other tolerances ±0.127mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. SG-LCC-6000 Drawing ©2015 Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: N/A Finish: N/A Weight: 6.55 STATUS: Released SHEET: 1 OF 4 REV. B ENG: S. Faiz DRAWN BY: D. Hauer SCALE: 3:1 FILE: SG-LCC-6000 Dwg DATE: 2/5/2013 15.225±0.100 SOCKET BASE 1.250±0.125 (X4) 4.8325* 1.270 *Note: LCC pattern is shifted 0.375mm to the right of center with respect to the mounting holes. 0.850±0.025 (X2) Non-plated alignment holes 1.250±0.125 (X4) 2.54 2.197 3.429 5.08 8.331 1.8542mmx0.889mm pads (X17) 5.08 1.70±0.05 (X4) Non-plated mounting holes 3.81 6.68 12.725±0.125 Target PCB Recommendations Total thickness: 1.5mm min. Plating: Gold or Solder finish Description: Recommended PCB layout Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.0254mm [±0.001"], Pitches (from true position) ±0.0762mm [±0.003"], substrate thickness tolerance ±10%, all other tolerances ±0.127mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. SG-LCC-6000 Drawing ©2015 Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: N/A Finish: N/A Weight: 6.55 STATUS: Released SHEET: 2 OF 4 REV. B ENG: S. Faiz DRAWN BY: D. Hauer SCALE: 6:1 FILE: SG-LCC-6000 Dwg DATE: 2/5/2013 PIN 1 Ironwood package code: LCC18B 0.0460 R0.009 0.35 0.305 0.287 0.262 0.25 0.237 0.212 0.187 0.162 0.137 0.112 0.087 0.062 0.045 0.285 0.205 0.23 0.24 0.18 0.155 0.13 0.105 0.045 0.055 0.08 0.000 0.000 Description: Compatible IC Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.0254mm [±0.001"], Pitches (from true position) ±0.0762mm [±0.003"], substrate thickness tolerance ±10%, all other tolerances ±0.127mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. SG-LCC-6000 Drawing ©2015 Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: N/A Finish: N/A Weight: 6.55 STATUS: Released SHEET: 3 OF 4 REV. B ENG: S. Faiz DRAWN BY: D. Hauer SCALE: 8:1 FILE: SG-LCC-6000 Dwg DATE: 2/5/2013 3 4 2 13 10 14 1 8 6 ITEM NO. DESCRIPTION Material 1 Socket Base 7075-T6 Aluminum Alloy 2 Compression Plate 7075-T6 Aluminum Alloy 3 Compression Screw M6x1 Stainless Steel (18-8) 4 Socket Lid 7075-T6 Aluminum Alloy 5 Target PCB FR4 High temp 6 IC guide for LCC 0.285" x 0.350" Torlon 4203 7 Nut, #0-80, SS Stainless Steel (18-8) 8 Dowel Pin, 1/32" x 3/16", SS Chrome Stainless Steel 9 Elast Gde 10x10mm Ultem 10 #0-80 X .375 LG, SOC HD CAP SCREW, ALLOY STL, BLK OXIDE Alloy Steel 11 Washer, #0 x .025", Nylon Nylon 6/6 12 0.75mm thick 0.1mm pitch 63 deg angled elastomer Silicon Rubber 13 Test Chip FR4 high temp 14 #0-80 Shoulder Screw, 0.090" thread length Stainless Steel (303) 9 12 5 11 7 Description: Socket detail Rev A Date 02/05/13 Initials DH B 03/30/15 DH Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.0254mm [±0.001"], Pitches (from true position) ±0.0762mm [±0.003"], substrate thickness tolerance ±10%, all other tolerances ±0.127mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. SG-LCC-6000 Drawing ©2015 Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: N/A Finish: N/A Weight: 6.55 STATUS: Released Description Original Changed IC Guide materila from Ultem to Torlon SHEET: 4 OF 4 REV. B ENG: S. Faiz DRAWN BY: D. Hauer SCALE: 3:1 FILE: SG-LCC-6000 Dwg DATE: 2/5/2013