KC three-terminal inductor/capacitor EU features • • • • • Compact physical dimensions Excellent wave reduction control Exceptional EMI attenuation Excellent as impedance matching for signal lines Marking: Brown and black body color with no marking (1J & 2AF) White and black body color (2A & 2B) • Products with lead-free terminations meet EU RoHS requirements dimensions and construction Size NEW L f W 1J 1J & 2AF 2AF e g NEW t e L W Dimensions inches (mm) t g e f .062±.008 .031±.008 .024±.008 .016±.008 .008±.006 (1.6±0.2) (0.8±0.2) (0.6±0.2) (0.4±0.2) (0.2±0.15) .079±.008 .049±.008 .031±.008 .016±.012 .012±.008 (2.0±0.2) (1.25±0.2) (0.8±0.2) (0.4±0.3) (0.3±0.2) N/A N/A 2A .079±.008 .049±.008 .063±.008 .016±.008 .004 Min. .02±.006 (2.0±0.2) (1.25±0.2) (1.6±0.2) (0.4±0.2) (0.1 Min.) (0.25±0.15) 2B .126±.012 .063±.012 .098±.012 .031±.012 .004 Min. .004 Min. (3.2±0.3) (1.6±0.3) (2.5±0.3) (0.8±0.3) (0.1 Min.) (0.1 Min.) L L W W f f 2A t 2B t e g e e g e New Part # KC 2AF Type Size 1J 2AF 2A 2B T Termination Material T: Sn TE Packaging TD: 7" paper tape (1J & 2AF only 4,000 pieces/reel) TE: 7" embossed plastic (2A only 2,000 pieces/reel) (2B only 1,500 pieces/reel) 120 N 6N5 L Capacitance Value (pF) 2 significant digits + no. of zeros Capacitance Tolerance M: ±20% N: ±30% P: ±25% Inductance Value (nH) 6.5nH Inductance Tolerance L: ±15% For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 2/24/08 KOA Speer Electronics, Inc. • Bolivar Drive • P.O. Box 547 • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 279 EMI/EMC filtering ordering information KC three-terminal inductor/capacitor circuit schematic applications and ratings 1J & 2AF Item Specification Operating Temperature Range Storage Temperature Range Measuring Condition (Standard) Temperature Relative Humidity Measuring Condition (Precision) Temperature Relative Humidity 2A & 2B -40°C to +85°C -40°C to +85°C (after soldering) 15°C to 35°C 1J, 2AF, 2B: 20 - 90%; 2A: 45 - 85% 20°C ± 1°C 1J, 2AF, 2A: 60 - 67%: 2B: 20 - 90% applications and ratings (continued) NEW NEW Part Designation KC1JTTD680P12NL KC1JTTD9R5P30NL KC1JTTD220P8N0L KC1JTTD350P8N0L KC1JTTD550P8N0L KC2AFTTD151N16N5L KC2AFTTD331N16N5L KC2AFTTD220N3N0L KC2AFTTD160N3N0L KC2AFTTD700N8N50L KC2ATTE120N6N5L KC2ATTE180N13NL KC2ATTE350N15NL KC2BTTE100N11NL KC2BTTE200M17NL KC2BTTE450M37NL KC2BTTE850M37NL KC2BTTE191M37NL KC2BTTE341M67NL Capacitance (pF) % Inductance (nH) % 68 ± 25% 9.5 ± 25% 22 ± 25% 35 ± 25% 55 ± 25% 150 ± 30% 330 ± 30% 22 ± 30% 16 ± 30% 70 ± 30% 12 ± 30% 18 ± 30% 35 ± 30% 10 ± 30% 20 ± 20% 45 ± 20% 85 ± 20% 190 ± 20% 340 ± 20% 12 ± 15% 30 ± 15% 8.0 ± 15% 8.0 ± 15% 8.0 ± 15% 16.5 ± 15% 16.5 ± 15% 3.0 ± 15% 3.0 ± 15% 8.5 ± 15% 6.5 ± 15% 13 ± 15% 15 ± 15% 11 ± 15% 17 ± 15% 37 ± 15% 37 ± 15% 37 ± 15% 67 ± 15% Rated Voltage DC (V) Rated Current DC (mA) Insulation Resistance Minimum (MΩ) Operating Temperature Range -20°C to +85°C 16 200 1000 -40°C to +85°C 25 200 1000 -40°C to +85°C 25 200 1000 -40°C to +85°C 25 200 1000 -40°C to +85°C Typical Cut-off Frequency (Att = 3dB) 20 MHz 400 MHz 200 MHz 100 MHz 50 MHz 50 MHz 20 MHz 200 MHz 400 MHz 100 MHz 530 MHz 360 MHz 180 MHz 660 MHz 320 MHz 140 MHz 70 MHz 30 MHz 20 MHz environmental applications Performance Characteristics Parameter Requirement Test Method EMI/EMC filtering Insulation Resistance Within the tolerance Voltage: DC25V (2AF, 2A), DC16V (1J) Test Time: 60 seconds Capacitance Within the tolerance Frequency: 1MHz Voltage: 1V Equipment: HP4192A Fixture: HP16034E Inductance Within the tolerance Frequency: 1MHz Current: 10mA Equipment: HP4192A Fixture: HP16034E Resistance (2A only) Within the tolerance Frequency: 1MHz Current: 10mA Equipment: HP4192A Fixture: HP16034E Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 280 5/23/07 KOA Speer Electronics, Inc. • Bolivar Drive • P.O. Box 547 • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com KC three-terminal inductor/capacitor environmental applications (continued) Performance Characteristics Capacitance vs. Temperature Characteristics Terminal Adhesion Strength Requirement Variation rate of capacitance in operate temperature are shown below: Part: KC2AT120N6NSL KC2AT180N13NL KC2AT350N15NL KC2BTTE100N11NL KC2BTTE200M17NL KC2BTTE450M37NL KC2BTTE850M37NL KC2BTTE191M37NL KC2BTTE341M67NL Rate: ±10% ±10% ±10% ±5% ±5% ±5% ±5% ±10% ±10% No physical damage Test Method The capacitance shall be measured at each stage below. The rate shall be calculated against the capacitance measured at 20°C. Step: 1 2 3 4 Temperature: 20°C -40°C ± 3°C 20°C 85°C ± 3°C Solder a chip to a test substrate and then laterally apply a load (5N, 500gF) in the arrow direction Force Direction Substrate Chip Resistance to Solder Heat Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Withstand Voltage: No abnormality Flux: 25% rosin Preheating: 120 to 180 seconds Preheating Temperature: 150°C to 200°C (1J, 2AF, 2B) Solder: H60A Solder Temperature: 260°C ±5°C Dip Time: 5 seconds ± 0.5 second Solderability More than 95% of the terminal electrode shall be covered with new solder Flux: 25% rosin Solder: H60A Solder Temperature: 235°C ±5°C Dip Time: 2 seconds ± 0.5 second Temperature Cycle* Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Withstand Voltage: No abnormality Repeat the following heat cycle 10 times: High Temperature Resistance* Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Withstand Voltage: No abnormality Temperature: 70°C ± 2°C Bias: DC25V (2AF, 2A, 2B), DC16V (1J) Bias: DC200mA Test Time: 500 hours Humidity Resistance (Unload)* Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Temperature: 85°C ± 2°C Humidity: 85% ± 5% Test Time: 500 hours Substrate Bending Test Appearance: No physical damage Capacitance: Within tolerance After soldering a chip to a test substrate, Substrate bend the substrate by 1 mm and then measure. The substrate is GE4 or based on GE4. 45 ± 2 Humidity Resistance (Load)* Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Step: 1 2 3 4 Temperature: -40°C ± 3°C Room Temp. 85°C ± 2°C Room Temp. Time: 30 minutes 15 minutes 30 minutes 15 minutes ± 3 minutes maximum ± 3 minutes maximum 20 Weight Displacement 45 ± 2 Temperature: 40°C ± 2°C Humidity: 90 - 95% Bias: DC25V Bias: DC200mA Test Time: 500 hours * After temperature cycle test, high temperature resistance test or humidity resistance test, the tested sample should be measured after having been left in temperature from 15°C to 35°C and relative humidity from 20% to 90% for 24 hours. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 3/12/07 KOA Speer Electronics, Inc. • Bolivar Drive • P.O. Box 547 • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 281 EMI/EMC filtering Parameter