Manual RF Coaxial Crimp Tool 73415-4550 With Two Die Sets Manual Coaxial Crimp Tool From Molex’s RF Division is Designed To Accommodate a Range Of Hex Sizes For Use With the Most Popular RF Connectors The manual RF crimp tool includes two die sets designed for the following hex crimp sizes: ■ Die Set One: 2.67mm (.105"), 3.25mm (.128"), 3.84mm (.151") ■ Die Set Two: 4.06mm (.160"), 4.52mm (.178"), 5.41mm (.213") The versatility of the crimp sizes ensures quality crimping of connectors. This crimp tool was designed to work with most RF connectors. Features and Benefits ■ Soft, padded handles are easier on operators’ hands ■ Durable high carbon steel tool frame and die sets promote longer tool and die life ■ Full ratchet release assures complete cycle for every crimp operation ■ Emergency ratchet release allows release of tool if improper hex size is selected ■ Angled head position improves comfort with repeated operation ■ Interchangeable die sets accommodate a range of hex sizes in a single tool Applications ■ All markets using coaxial cable assemblies - Small cable assembly runs - Prototypes - Field installation - Engineering labs ORDERING INFORMATION Hex Size Order No. Description 73415-4500 Manual RF Coaxial Crimp tool with Two Die Sets RF/Microwave Connector Division Mooresville, IN 46158 317-834-5600 [email protected] Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 [email protected] Far East South Headquarters Jurong, Singapore 65-6-268-6868 [email protected] Die Set One 2.67mm (.105") 3.25mm (.128") 3.84mm (.151") European Headquarters Munich, Germany 49-89-413092-0 [email protected] Die Set Two 4.06mm (.160") 4.52mm (.178") 5.41mm (.213") Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax:630-969-1352 V isit o u r W e b sit e a t www.mo l e x .co m/ pro du ct / rf/ co ax _cri mp_t o o l .h t ml Order No. USA-233 Printed in USA/JI/2004.04 2004, Molex ©