® Motor Driven Card Reader/Writer 3S4YR-MVF/MVS Reliably Handles Read/Write Functions for both Magnetic and IC Cards ■ ■ ■ ■ ■ ■ ■ Downloadable firmware for specification updates, customer requirements, firmware updates, new smart card support Powerful all-roller card feeding system easily handles warped and/or wet cards Highly reliable reading/writing of all three tracks using new pick-up encoder technology Fully-integrated RS-232C eliminates the need for IC adapter boards User-friendly interface with multifunction commands and support for T=0 and T=1, EMV Compact size and light weight for easy installation Locking shutter for fraud prevention Ordering Information Magnetic Tracks Supported (R, R/W) IC 1 2 3 Center JIS II Contact Interface Built-in Card (see note 3) Shutter Ejection R/W R/W R/W — — No RS-232 Yes Front/Rear Black — 3S4YR-MVFW1D-052 R/W R/W R/W — — ISO 7816 RS-232 Yes Front/Rear Black — 3S4YR-MVFW1JD-051L Yes Front/Rear Black Memory card 3S4YR-MVFW1JD-M51L support (see note1) Color Notes Part Number (see note 2) R/W R/W R/W — — ISO 7816 RS-232 R/W R/W R/W — — ISO 7816 RS-232 Yes Front/Rear Black HiCo 3S4YR-MVFW1JDH-074 R/W R/W R/W — — No RS-232 Yes Front/Rear Black R/W R/W R/W — — ISO 7816 RS-232 Yes Front/Rear Black Housing 3S4YR-MVS1D (MVFW1D-052 Core) 3S4YR-MVS1JD (MVFW1JD-051L Core) — Note 1: Inquire regarding specific memory card support. 2: Models with support for SAM modules are available. Please contact Omron for details. 3: Please contact Omron for details concerning USB interface availability. ■ TYPICAL APPLICATIONS • Cash Dispensers • Automatic Teller Machines (ATM) • POS Terminals • Credit Card Checkers • ID Card Checkers • Electronic Lock System • Medical Patient System • Health Control System •Teller Terminal • Front desk card encoders 3S4YR-MVF/MVS 3S4YR-MVF/MVS Specifications Part number Recommended card type 3S4YR-MVF 3S4YR-MVS Magnetic card ISO 7810, 7811/1-5, 7812, 7813. Please inquire if using high-coercivity cards. IC card (see Note 1) ISO 7816/1-4 (T=0 and/or T=1) Recording method FM decoding (F2F) Card feeding speed 20 cm/sec (8 in/sec) in normal operation; 5 cm/sec (2 in/sec) IC card handling Location of magnetic stripe Installation Motor type DC motor Service life (see note 2) At bottom Entire unit 1,500,000 passes or 5 years, whichever comes first IC contact 300,000 times Operating power supply 24 VDC ± 10% Current consumption 2.0 A or less when motor revolution starts; 500 mA in standby mode Mounting location Indoors — away from wind, rain, and sunlight 5° to 55°C (41° to 131°F) 0° to 40° C (32° to 104°F) Storage -25° to 55°C (-13° to 131°F) -25° to 55° C (-13° to 131°F) Operation 5% to 85% RH, no condensation 35% to 85% RH, no condensation (see note 3) Storage 5% to 90% RH, no condensation 5% to 90% RH, no condensation (see note 3) Ambient temperature Operation Ambient humidity 100 VAC to 240 VAC (± 10%) Vibration 10 to 150 Hz and single vibration width of 0.15 mm or an acceleration of 2 G (19.6 m/sec2), whichever is smaller Shock 20 G in six directions (up and down, left and right, forward and back, 3 times in each direction) Dimensions (with shutter) 210L x 124W x 90H mm (8.27L x 4.88W x 3.54H in) 271L x 130W x 154H mm (10.67L x 5.12W x 6.06H in) Weight Approx. 2 kg (4.41 lbs) Approx. 4.5 kg (9.92 lbs.) without attachment Note 1: Please request confirmation on specific IC card compatibility, including EMV (Europay / Mastercard / Visa) and memory cards. 2: One pass denotes one round trip. 3: Absolute air humidity in operation is 23 g/m3 or less. In storage, absolute air humidity is 40 g/m3 or less. Engineering Data ■ I/O INFORMATION RS-232C Interface automatically recognizes data transmission speeds of 1200, 2400, 4800, 9600, and 19200 baud. 3S4YR-MVFW1JD RS-232C Interface 3S4YR-MVFW1JD Power Interface Card reader side: JAE 9-pin D-Sub socket, DELC-J9SAF-10L9. Card reader side: Molex 4 node, 2.54 mm pitch in serial 5046-04A. Pin # Signal Input/Output Description Pin # Signal Input/Output 1 NC — Not connected 1 +24V — Power supply 2 RXD Input Receive data 2 GND — Power ground 3 TXD Output Transmit data 3 XGND — Secondary power ground 4 DTR Output Data terminal ready 4 X24V — Secondary supply 5 GND — Ground 6 NC — Not connected 7 NC — Not connected 8 CTS Input Clear to send 9 NC — Not connected 2 Description 3S4YR-MVF/MVS 3S4YR-MVF/MVS Dimensions Unit: mm (inch) ■ 3S4YR-MVF with shutter (Also available without shutter.) 210 (8.27) 86 (3.39) 124 (4.88) 25 (0.98) min. 57 (2.24) 57 (2.24) 44 (1.73) 78 (3.07) 31.6 62 (1.24) (2.44) 57 (2.24) 70.2 (2.76) 4-3.5 x 6 Elongated Hole 86 (3.39) 47 (1.85) 2.1 (0.08) 17 (0.67) 26 (1.02) 90 (3.54) 12 (0.47) 45 (1.77) 8 (0.31) 4 (0.16) Interface Connector PCB 86 (3.39) 57 (2.24) 62 (2.44) 57 (2.24) 124 (4.88) 2-M3 2-M3 57 (2.24) 86 (3.39) 47 (1.85) 210 (8.27) 3 3S4YR-MVF/MVS 3S4YR-MVF/MVS ■ 3S4YR-MVS Unit: mm (inch) Bottom Top 70 (2.76) 271.5 (10.69) 144.1 (5.67) POWER READY 130 (5.12) RUN ERROR Bottom Top 9.9 (0.39) 97.2 (3.83) 154 (6.06) NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. R OMRON ELECTRONICS, INC. OMRON CANADA, INC. 1-800-55-OMRON 416-286-6465 One East Commerce Drive Schaumburg, IL 60173 Cat. No. GC CR3 7/00 885 Milner Avenue Scarborough, Ontario M1B 5V8 Specifications subject to change without notice. 4 Printed in U.S.A.