OMRON D2VW-01L1-1MS

Sealed Snap Action Switch
D2VW
Watertight Miniature Snap Action Switch
• High-quality watertight, high-precision miniature Snap
Action switch. Switch Body meets IP67 requirements
• Use of epoxy resin assures high sealing capability and is
ideal for dusty places or where water is sprayed
• V-series internal mechanism assures high precision and
long life
• General-load (5 A at 250 VAC) models and micro-load
models are available
• RoHS Compliant
Ordering Information
Actuator
Terminal
Model 0.1 A
Model 5 A
Pin plunger
With solder and #187 tab terminals
D2VW-01-1HS
D2VW-5-1HS
With lead wires
D2VW-01-1MS
D2VW-5-1MS
With solder and #187 tab terminals
D2VW-01L1A-1HS
D2VW-5L1A-1HS
With lead wires
D2VW-01L1A-1MS
D2VW-5L1A-1MS
With solder and #187 tab terminals
D2VW-01L1-1HS
D2VW-5L1-1HS
Short hinge lever
Hinge lever
Model
With lead wires
D2VW-01L1-1MS
D2VW-5L1-1MS
Long hinge lever
With solder and #187 tab terminals
D2VW-01L1B-1HS
D2VW-5L1B-1HS
With lead wires
D2VW-01L1B-1MS
D2VW-5L1B-1MS
Simulated roller lever
With solder and #187 tab terminals
D2VW-01L3-1HS
D2VW-5L3-1HS
With lead wires
D2VW-01L3-1MS
D2VW-5L3-1MS
Short hinge roller lever
With solder and #187 tab terminals
D2VW-01L2A-1HS
D2VW-5L2A-1HS
With lead wires
D2VW-01L2A-1MS
D2VW-5L2A-1MS
Hinge roller lever
With solder and #187 tab terminals
D2VW-01L2-1HS
D2VW-5L2-1HS
With lead wires
D2VW-01L2-1MS
D2VW-5L2-1MS
Note: 1. The standard lengths of the lead wires (UL1015 AWG20 for UL/CSA models, AV0.75f otherwise) of models incorporating them are 30 cm.
2. Remove “-HS” from the end of solder/quick-connect models to obtain non-UL/CSA versions. (e.g.: D2VW-01-1HS → D2VW-01-1)
3. Remove “S” from the end of lead wire models to obtain non-UL/CSA versions with AV0.75f wire. (e.g.: D2VW-5L3-1MS → D2VW-5L3-1M)
Model Number Legend
D2VW-
1 2
1.
3 4
Ratings
5: 5 A at 250 VAC
01: 0.1 A at 30 VDC
2.
Actuator
3.
None: Pin plunger
L1A:
Short hinge lever
L1:
Hinge lever
L1B:
Long hinge lever
L3:
Simulated roller lever
L2A:
Short hinge roller lever
L2:
Hinge roller lever
Contact Form
1:
SPDT
2:
SPST-NC*
3:
SPST-NO*
4.
Terminals
None, HS: Solder terminals
(HS for UL and CSA approval.)
M, MS:
Molded lead wires
(MS for UL and CSA approval)
*Lead wire versions only
Sealed Snap Action Switch
D2VW
207
Specifications
■ Characteristics
Model
D2VW-01
D2VW-5
Operating speed
0.1 mm to 1 m/s (at pin plunger)
Operating frequency
Mechanical: 300 operations/minute max.
Electrical: 30 operations/minute max.
Insulation resistance
100 MΩ min. (at 500 VDC)
Contact resistance
50 mΩ max. (100 mΩ max. for molded lead wire models)
Dielectric strength (See note 2)
1,000 VAC, 50/60 Hz for 1 min. between terminals of the same polarity
1,500 VAC, 50/60 Hz for 1 min. between each current-carrying metal parts and ground, and
between each terminal and non-current-carrying metal parts.
Vibration resistance (See note 3)
Malfunction: 10 to 55 Hz, 1.5 mm double amplitude
Shock resistance (See note 3)
Destruction: 1,000 m/s2 (approx. 100G) max.
Malfunction: 300 m/s2 (approx. 30G) max.
Degree of protection
IEC IP67 (excluding the terminals on terminal models).
Degree of protection against electric shock
Class I
Proof tracking index (PTI)
175
Ambient operating temperature
-40° to 85°C (at 60% RH max.) with no icing
Ambient operating humidity
95% max. (for 5°C to 35°C)
Life expectancy
Mechanical
10,000,000 operations min. at 60 operations per minute
Electrical
1,000,000 operations min. at 30 ops. per minute. 100,000 operations min. at 30 ops. per minute
Weight
Approx. 7g (pin plunger models without wires)
Note: 1. Data shown are of initial value.
2. The dielectric strength shown is measured using a separator between the switch and metal mounting plate.
3. For the pin plunger models, the above values apply for use at the free position and total travel position. For the lever models, the values
apply at the total travel position.
4. The operating temperature of the lead wire (AV0.75f) for non-UL/CSA molded lead wire models is between -40 to 85°C.
■ Ratings (reference values)
D2VW-5
Rated Voltage
Non-inductive load
Resistive load
NC
Inductive load
Lamp load
NO
NC
Inductive load
NO
NC
Motor load
NO
NC
125 VAC
5A
0.5 A
4A
—
250 VAC
5A
0.5 A
4A
—
30 VDC
5A
3A
4A
—
125 VDC
0.4 A
0.1 A
0.4 A
—
NO
D2VW-01
Rated Voltage
Non-inductive load
Resistive load
NC
Inductive load
Lamp load
NO
NC
Inductive load
NO
NC
Motor load
NO
NC
125 VAC
0.1 A
—
—
—
30 VDC
0.1 A
—
—
—
Note: 1. The resistive load ratings apply under the following test conditions:
Ambient Temperature = 20±2°C, Ambient Humidity = 65±5%, Operating frequency = 30 operations/min.
2. The above current ratings are the values of the steady-state current.
3. Inductive load has a power factor of 0.7 min. (AC) and a time constant of 7 ms max. (DC).
4. Lamp load has an inrush current of 10 times the steady-state current.
5. Rating for UL/CSA approval is as follows (See “Approved Standards” section):
D2VW-01
0.1A @ 125 VAC
0.1A @ 30 VDC
D2VW-5
208
3A @ 125 VAC, 250 VAC
Sealed Snap Action Switch
D2VW
NO
■ Approved Standards
■ Contact Specifications
UL Recognized, CSA Certified
Rated Voltage
D2VW-5
D2VW-01
125 VAC
250 VAC
3A
3A
0.1 A
---
30 VDC
---
0.1 A
EN 61058-1 (VDE Approval)
Rated Voltage
D2VW-5
D2VW-01
125 VAC
250 VAC
--3A
0.1 A
---
Testing conditions:
25E3 (25,000 operations), T85 (0°C to 85°C) for D2VW-5
1E5 (100,000 operations), T85 (0°C to 85°C) for D2VW-01
Item
Specification
Material
Gap (standard value)
Inrush current
D2VW-5
D2VW-01
Rivet
Crossbar
Silver alloy
Gold alloy
0.5 mm
NC: 15 A max.
--NO: 15 A max.
Minimum applicable load 160 mA at 5 VDC 1 mA at 5 VDC
(see note)
Note: Minimum applicable loads are indicated by N standard reference values. This value represents the failure rate at a 60%
(λ60) reliability level (JIS C5003).
The equation λ60=0.5 x 10-6 / operations indicates that a failure
rate of 1/2,000,000 operations can be expected at a reliability
level of 60%
Engineering Data
■ Structure
SPDT
SPST-NC
NC (red)
NO (blue)
COM (black)
Note:
SPST-NO
NC (red)
COM (black)
NO (blue)
COM (black)
Colors in parentheses indicate lead wire colors.
■ Mounting
All switches may be panel mounted using M3 mounting screws with
plane washers or spring washers to securely mount the switch.
Tighten the screws to a torque of 0.39 to 0.59 N·m.
Two, 3.1-dia. mounting holes or
M3 screw holes
10.3 ± 0.1
22.2 ± 0.1
Sealed Snap Action Switch
D2VW
209
Dimensions
■ Terminals
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions
2. The pin plunger model is shown here as a typical example for both the solder/quick connect terminals and the molded lead wire versions.
Solder/Quick Connect Terminals
2.4 dia. hole
Molded Lead Wires
1.3 dia. hole
AV 0.75f Lead wire (red)*
10.3
AV 0.75f Lead wire (blue)*
AV 0.75f Lead wire (black)*
4.8
1.2
5.2
8.4
2.5
5.2
0.5
33
5.2
10.3
300±10
* UL/CSA approved models have AWG20 UL approved wiring.
22.2±0.1
2.8
(5)
22.2±0.1
2.8
t=0.5
Three, solder terminals
33
41.4
■ Dimensions and Operating Characteristics
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions
2. Omitted dimensions are the same as pin plunger type.
3. The operating characteristics are for operation in the A direction( )
Pin Plunger Models
2.4 dia. hole
D2VW-01-1HS
D2VW-5-1HS
1.3 dia. hole
10.3
4.8
OF max
1.2
5.2
20.2±0.25
A
2.5 dia.
2.8
PT
OP
8.4
+0.13
3.1 –0.03 dia. holes
0.5
15.9 10.3±0.1
30 gf
PT max.
1.2 mm
OT min.
1.0 mm
MD max.
2.5
5.2
OP
5.2
200 gf
RF min.
0.4 mm
14.7 ± 0.4 mm
3.2±0.1 dia.
+0.13
3.1 –0.03
22.2±0.1
2.8
t=0.5
Three, solder terminals
33
41.4
Short Hinge Lever Models
D2VW-01L1A-1MS
D2VW-5L1A-1MS
A
24.3±0.8
t=0.5* 5
4.3
PT
OP
15.9
OF max
20 gf
PT max.
1.6 mm
OT min.
0.8 mm
MD max.
*Stainless-steel lever
10.3
200 gf
RF min.
OP
0.5 mm
15.2 ± 0.5 mm
Hinge Lever Models
OF max
D2VW-01L1-1MS
D2VW-5L1-1MS
A
35.6±0.8
t=0.5*
5
4.3
PT
OP 15.9
210
15 gf
PT max.
4.0 mm
OT min.
1.6 mm
MD max.
*Stainless-steel lever
Sealed Snap Action Switch
D2VW
OP
10.3
120 gf
RF min.
0.8 mm
15.2 ± 1.2 mm
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions
2. Omitted dimensions are the same as pin plunger type.
3. The operating characteristics are for operation in the A direction( )
Long Hinge Lever Models
D2VW-01L1B-1MS
D2VW-5L1B-1MS
A
59.4±0.8
4.3
5
t=0.5*
PT
OP
15.9
OF max
5 gf
PT max.
9.0 mm
OT min.
3.2 mm
MD max.
*Stainless-steel lever
10.3
60 gf
RF min.
OP
2.0 mm
15.2 ± 2.6 mm
Simulated Roller Lever Models
D2VW-01L3-1MS
D2VW-5L3-1MS
OF max
A
PT
32.6±0.8
3.5R
t=0.5*
4.3
5
OP
15 gf
PT max.
4.0 mm
OT min.
1.6 mm
MD max.
15.9
OP
D2VW-01L2A-1MS
D2VW-5L2A-1MS
4.8 dia. 4.8 **
PT
0.8 mm
18.7 ± 1.2 mm
10.3
*Stainless-steel lever
Short Hinge Roller Lever Models
120 gf
RF min.
24.3±0.8
A
20.1±0.8
5
t=0.5*
OF max
7.2
OP
20 gf
PT max.
1.6 mm
OT min.
0.8 mm
MD max.
15.9
OP
*Stainless-steel lever
**Oil-less polyacetal resin roller
230 gf
RF min.
0.5 mm
20.7 ± 0.6 mm
10.3
Hinge Roller Lever Models
D2VW-01L2-1MS
D2VW-5L2-1MS
A
34±0.8
4.8 dia. 4.8 **
PT
5
7.2
t=0.5*
OP
15.9
OF max
15 gf
PT max.
4.0 mm
OT min.
1.6 mm
MD max.
OP
*Stainless-steel lever
**Oil-less polyacetal resin roller
120 gf
RF min.
0.8 mm
20.7 ± 1.2 mm
10.3
Sealed Snap Action Switch
D2VW
211
Precautions
Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide,
“Snap Action Switches, Technical Information” for correct use.
■ Correct Use
■ Cautions
Operations
Degree of Protection
Make sure that the switching object is perfectly separated from the
actuator when the switch is not operated and the actuator is pressed
appropriately by the switching object when the switch is operated.
The D2VW was tested under water and passed the following watertightness test, which however, does not mean that the D2VW can be
used in the water.
The switch should be set so that its stroke will be within the rated OT
when the switch is operated.
JIS C0929 (rules for testing the watertightness of electrical devices
and materials), class 7 (watertightness test). Refer to the following
illustration for the test method at OMRON.
With the pin plunger models, set the switch so that the plunger can
be actuated from directly above. Since the plunger is covered with a
rubber cap, applying a force from lateral directions may cause
damage to the plunger or reduction in the sealing capability.
Correct
Incorrect
Incorrect
Handling
Handle the switch carefully so as not to break the sealing rubber of
the plunger.
Using Microloads
Voltage (V)
Using a model for ordinary loads to switch microloads may result in
faulty operation. Instead, use the models that are designed for
microloads and that operate in the following range;
30
26mA 100mA
0.16mA
24
Operating range
for micro load
models D2VW-01
Operating
range for
general-load
models
D2VW-05
12
Inoperable
range
5
0
1mA
1
100mA 160mA
10
100
1,000
Current (mA)
However, even when using microload models within the operating
range shown above, if inrush current or inductive voltage spikes
occur when the contact is opened or closed, then contact wear may
increase and so decrease the service life. Therefore, insert a contact
protection circuit where necessary.
212
Sealed Snap Action Switch
D2VW
Note: The object to be tested is left in the water for 30 minutes on condition that the distance between the surface of the water and
the top of the object be 15 cm minimum and the distance between the surface of the water and the bottom of the object be
1 m minimum.
Protection Against Chemicals
Prevent the switch from coming into contact with oil and chemicals.
Otherwise, damage to or deterioration of the switch materials may
occur.
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
These terms and conditions
(b) Seller:
Omron Electronic Components LLC and its subsidiaries
(c) Buyer:
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at the time the purchase order is accepted by
Seller. Payments for Products received are due net 30 days unless otherwise stated in
the invoice. Buyer shall have no right to set off any amounts against the amount owing in
respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real
property and income taxes), including any interest or penalties thereon, imposed directly
or indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license
taxes) shall be charged to and remitted by Buyer to Seller.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel
any unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products
shall pass from Seller to Buyer, provided that Seller shall retain a security interest in
the Products until the full purchase price is paid by Buyer;
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier or any claim related to pricing or other charges
must be presented in detail in writing to Seller within 30 days of receipt of shipment.
III. PRECAUTIONS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
IV. WARRANTY AND LIMITATION
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
correctly handled, stored, installed and maintained and not subject to contamination,
abuse, misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and descriptions may be changed at
any time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information.
VI. MISCELLANEOUS
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any
dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
Sealed Snap Action Switch
D2VW
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in
Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
3. Performance Data. Performance data given in this publication is provided as
a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
Global - http://www.omron.com
USA - http://www.components.omron.com
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
Cat. No. X303-E-1
11/09
Sealed Snap Action Switch
Specifications subject to change without notice
D2VW
Printed in USA