ACTIVE (DIGITAL) DELAY LINES SINGLE, DUAL, TRIPLE, QUAD DELAYS A0 SERIES RoHS RESISTORSCAPACITORSCOILSDELAY LINES RCD A03SAG 1 50NS Term.W is RoHS compliant Economical cost, prompt delivery! Wide range of values, 5nS to 500nS TTL Schottky interfaced OPTIONS Opt.T= trailing edge design Opt. F =fast TTL, H =HCMOS, C =FACT Opt.A = auto-insertable design Opt.39 = -40 to +85°C operating temp. Tighter tolerances, faster rise times Low power design Military screening Low cost solution for multiple timing delays in a single package! RCD’s digital delay lines have been designed to provide precise fixed delays with all the necessary drive and pick-off circuitry. All inputs and outputs are Schottky-type and require no additional components to achieve specified delays. Designed to meet the applicable environmental requirements of MIL-D-23859. Type A01 features a single fixed delay, type A02 features two isolated delays, A03 features three delays, and A04 features 4 delays (single delay SIP available). Application Guide available. PACKAGE STYLES .500 [12.7] Max .015 [.4] 5nS, 10nS, 15nS, 20nS, 25nS, 50nS, 75nS, 100nS, 250nS, 500nS Intermediate values available on special order. .285 [7.24] .295 [7.5] Max. TOP VIEW ↓ RCD Type Independent Delays P a cka g e Style Circuit A 01 Single 14P A A 01S Single 8P B A 01A G Single 14S M A A01SAG Single 8S M B A 02A Dual 14P C A 02S A Dual 8P D ←.100 [2.54] .300±.01 [7.6±.25] A 02A G Dual 14S M C 8S M D A 03 Triple 14P E A 03S Triple 8P F A 03A G Triple 1 → ← ← .800 [20.3] Max. → ↓ ↑ 14S M E A 03S A G Triple 8S M F A 04 Quadruple 14P G A 04A G Quadruple 14S M G TEST CONDITIONS @25°C 1.) Input test pulse voltage: 3.2V 2.) Input pulse width: 50nS or 1.2x the total delay (whichever is greater) 3.) Input rise time: 2.0nS (0.75V to 2.4V) 4.) Delay measured at 1.5V on leading edge only with no loads on output (specify opt. T for trailing edge design) 5.) Supply Voltage (Vcc): 5V 6.) Pulse spacing: 2x pulse width minimum ←.300 [7.6] → ← .420 [10.67] → ← PACKAGE STYLE 8SM (8-Pin SM DIP) ← .40 [10.2]Max → .800 [20.3] Max 14 ↑ 8 .285 [7.24] .295 [7.5] SIDE VIEW 4 → .020 [.5] .10 [2.54] PACKAGE STYLE 8P (8-Pin DIP) TOP VIEW Max. .300 [7.6] ↓ .015 [.4] → ± .010 → ← .600 [15.2 ± .25] .120 [3] Min ←.100 [2.54] 1 .300±.01 [7.6±.25] 7 → → ← ← .10 [2.54] .020 [.5] ←.300 [7.6] → ← .420 [10.67] → PACKAGE STYLE 14SM (14-Pin SM DIP) CIRCUIT SCHEMATICS Circuit B Circuit A 14 (VCC) 8 (OUT) DELAY A02SAG Dual .250 [6.35] .120 [3] Min → PACKAGE STYLE 14P (14-Pin DIP) CHARACTERISTICS 5 8 .300 ±.01 [7.62±.25] SPECIFICATIONS Operating Temp: 0 to 70°C Delay Tol: ±2nS or ±5%, whichever greater Rise Time: 4nS Peak Soldering Temp: +230°C .500 [12.7] Max .40 [10.2]Max ↑ SIDE SIDE VIEW ↓ ↑ STANDARD DELAY TIMES RCD A04AG 100NS 1 1 (IN) 10 (OUT) DELAY DELAY 1(IN) 3 (IN) DELAY 4 (GND) 7 (GND) 1 (IN) 8 (OUT) 8 (VCC) 7(OUT) 6 (OUT) 5 (OUT) 8 (OUT) 5 (IN) 7(GND) 1(IN) DELAY DELAY 5 (IN) 7 (GND) 1(IN) DELAY DELAY DELAY 8 (VCC) 7 (OUT) 5 (OUT) DELAY 1(IN) 3 (IN) 4(GND) Circuit G Circuit F DELAY Circuit D Circuit C 14 (VCC) 12 (OUT) DELAY Circuit E 14(VCC) 12(OUT) 5 (OUT) 8 (VCC) 14 (Vcc) 12 (OUT) 10 (OUT) DELAY 2 (IN) 3 (IN) 4 (GND) 9 (OUT) 8(OUT) DELAY DELAY DELAY 1(IN) 3 (IN) 4(IN) 5 (IN) 7 (GND) P/N DESIGNATION: A01A - 100NS - B W Type: A01, A01S, A01AG, etc. Options: T, H, F, C, A, 39 (leave blank if std.) Delay Time: 5NS, 10NS, etc. Packaging: B=Bulk (Magazine tube is standard) Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable) RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected] FA077 Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 108