RESISTORSCAPACITORSCOILSDELAY LINES THIN-FILM PLATINUM TEMPERATURE SENSOR PT SERIES Term.W is RoHS RoHS compliant Industry’s lowest cost and widest selection! Precision performance, excellent stability, fast response Wide resistance range: 100Ω, 500Ω, 1000Ω Dual sensors available in a single package (Type PTD) Meets DIN 43760 and IEC 751 Choice of temperature ratings (up to +640°C) TYPE PTF - FLAT ELEMENT TYPE PTR - CYLINDRICAL (ceramic encased) H W ← L → NEW→ PTF1/2 PTF1 PTF4 PTF5 ← L→ ← L → ↑ Dimensions W ±.016 [.4] L ±.02 [.5] .062 .080 .080 .080 .125 .400 .100 .200 [1.6] [2] [2] [2] Non-standard resistance values up to 2000Ω Surface Mount chip elements Insulated extension wires Assembly into stainless steel probes (PTS Series) MIL-Spec Group A & B environmental testing TYPE PTA - AXIAL LEAD (ceramic encased) ↓ W RCD Type SPECIAL MODIFICATIONS (Consult Factory) Standard Resistance Values H Max. [3.2] [10] [2.5] [5] .047 .055 .047 .055 [1.2] [1.4] [1.2] [1.4] TYPE PTD - DUAL ELEMENT (ceramic encased) ↓ ↓W W ← L→ ↑ Typical Response Time (sec.) Water 0.2 m/s 50% 90% Air 1 m/s 50% 90% Self Heating Air 1m/s (°C/mW) 100 100,500,1000 100 100, 500, 1000 .08 .2 .07 .1 .25 .5 .2 .3 4 5 3 5 11 13 10 15 .17 .17 .30 .25 PTR1 PTR2 .125 [3.2] .120 [3] .530±.062 .250±.031 N/A N/A 100,500,1000 100 1.5 1.3 6 5 20 15 66 50 .12 .16 PTA1 PTA2 .125 [3.2] .120 [3] .600±.04 .250±.031 N/A N/A 100,500,1000 100 1.5 1.3 6 5 20 15 66 50 .12 .16 PTD1 .170 [4.3] .675±.062 N/A 2x100, 2x500, 2x1000 2 8 25 80 .12 RESISTANCE AND INTERCHANGEABILITY SPECIFICATIONS Operati ng Temperature Range °C Resistance -50 .803 ±.25°C ±.55°C ±.85°C ±1.1°C +3850ppm/°C 0 1.000 ±.15°C ±.3°C ±.45°C ±.6°C <0.1°C typ. dri ft after 1000 hours at Max Temp 10MΩ Mi n. @ 25°C , 1 MΩ Mi n. @ Max. Temp. Insulati on Tolerance DIN 1.5 DIN Type L: -50 to +200°C (low temp, economy) Type H: -50 to +500°C (hi gh temp, i ndustri al) Type T: -50 to +640°C (hi ghest temp, speci alty) TC R (0°C to 100°C ) Stabi li ty ↑ C apaci tance (1 KHz) <10 pF Inductance Essenti ally non-i nducti ve (<0.1µH) TOLERANCES (B is standard) Temperature Tolerance (@ 0°C) DIN 43760 Letter C ode .5 DIN A .06% .15°C DIN B .12% .3°C 1.5 DIN L .2% .5°C 2 DIN C .25% .6°C 4 DIN D .5% 1.3°C 5 DIN E .6% 1.5°C 2 DIN +100 1.385 ±.35°C ±.8°C ±1.2°C ±1.6°C +200 1.758 ±.55°C ±1.3°C ±2.0°C ±2.6°C +300 2.120 ±.75°C ±1.8°C ±2.7°C ±3.6°C +400 2.470 ±.95°C ±2.3°C ±3.5°C ±4.6°C +500 2.809 ±1.15°C ±2.8°C ±4.2°C ±5.6°C P/N DESIGNATION: Resistance Tolerance (@ 0°C) .5 DIN PTF2 H - 1001 - D T W RCD Type Temperature Rating: L, H, or T Option Codes: (leave blank if standard) 4-Digit Resis. Code (at 0° C): 3 signif. digits & multiplier (1000=100Ω, 5000=500Ω, 1001=1KΩ) Tolerance @0°C: See tolerance table for codes (“B” is std) Packaging: B = Bulk (standard) Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable) RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected] FA056B Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 87