SANYO VS902SL

VS902SL
Ordering number : ENA1296
SANYO Semiconductors
DATA SHEET
VS902SL
Low Capacitance TVS Diode
General Purpose Protection Device
Applications
•
•
•
•
USB 2.0.
Mobile communication.
STB, MP3, DVD, DSC, LCD....
Notebooks and desktop computers, peripherals.
Features
•
•
•
•
•
ESD / transient protection of high-speed data lines in 3.3 /5/12V applications.
Smallest form factor down to 1.0×0.6×0.4mm3.
Maximum working voltage: -8/+14V.
Very low capacitance down to 2pF (When used in series).
Pb-free (RoHS compliant) package.
Specifications
Absolute Maximum Ratings at Ta=25°C, unless otherwise specified
Parameter
ESD Discharge *1
Symbol
Peak Pulse Current *2
VESD
Ipp
Operating Temperature Range
Storage Temperature
Conditions
Between all pins
Tp=8/20μs
Ratings
Unit
15
kV
1
A
Top
--55 to +125
°C
Tstg
--65 to +150
°C
Note : *1 VESD according to IEC61000-4-2
*2 Ipp according to IEC61000-4-5
Marking : B3
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not
be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal
system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten
human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they
grant any guarantee thereof. If you should intend to use our products for applications outside the standard
applications of our customer who is considering such use and/or outside the scope of our intended standard
applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the
intended use, our customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are
not guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an
independent device, the customer should always evaluate and test devices mounted in the customer' s
products or equipment.
www.semiconductor-sanyo.com/network
N0508RV MS IM TC-00001639 No. A1296-1/3
VS902SL
Electrical Characteristics at Ta=25°C, unless otherwise specified
Parameter
Symbol
Reverse Working Voltage
Ratings
Conditions
min
VRWM
Breakdown Voltage
Reverse Current
Clamping Voltage
V(BR)
IR
I(BR)=1mA, from pin1 to 2
VR=3V, between all pins
14
14.5
V
V
8.5
V
23
V
50
VESD=+15kV(contact), *3, from pin1/2 to 3
VESD=--15kV(contact), *3, from pin1/2 to 3
CT
Unit
max
--8
I(BR)=1mA, from pin1/2 to 3
I(BR)=1mA, from pin3 to 1/2
VCL
Line Capacitance
typ
26
nA
V
20
V
VR=0V, f=1MHz, from pin1/2 to 3
4
7
pF
VR=0V, f=1MHz, from pin1 to 2, pin3 is not connected
2
4
pF
Note : *3 VESD according to IEC61000-4-2
Package Dimensions
Electrical Connection
unit : mm (typ)
7061-001
D1
1
0.6
3
3
2
1 : Cathode
2 : Cathode
3 : GND
1.0
Top view
1
2
Pin 1 Marking
0.4
0.05 MAX
D2
0.35
2
0.25
0.15
0.15
1
3
0.5
0.25
0.65
1 : Cathode
2 : Cathode
3 : GND
SANYO : TSLP-3-1
Application Example
2 channels, bi-directional
2 protected signal lines, level up to
±8V (bi-directional) or +14V (uni-directional)
ESD
I/O
sensitive
I/O device
Connector
1
2
3
IT13978
No. A1296-2/3
VS902SL
Application Example
1 high-speed channel, bi-directional
Protected high-speed signal line, level up to
±22V (bi-directional)
Connector
2
ESD
I/O sensitive
device
3
Pin3 is not connected.
1
IT13979
Reverse Current
100
f=1MHz
5
5°C
Ta=8
3
Line Capacitance, CT -- pF
Reverse Current, IR -- nA
7
5
2
10
7
5
25°C
3
2
4
3
Pins 1/2
2
to 3
Pins 1 to 2
1
1.0
7
5
Line Capacitance
6
0
2
4
6
8
10
Reverse Voltage, VR -- V
12
14
IT13975
0
0
5
10
15
Reverse Voltage, VR -- V
IT13980
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating
condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
Co.,Ltd. products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures
or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give
rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment,
adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but
are not limited to protective circuits and error prevention circuits for safe design, redundant design, and
structural design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or
otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be
granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any
third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third
party's intellectual property rights which has resulted from the use of the technical information and products
mentioned above.
This catalog provides information as of November, 2008. Specifications and information herein are subject
to change without notice.
PS No. A1296-3/3