SANYO RD0504T

RD0504T
Ordering number : ENA1851
SANYO Semiconductors
DATA SHEET
RD0504T
Diffused Junction Silicon Diode
Low VF • High-Speed Switching Diode
Features
•
•
VRRM=400V
trr=17ns(typ.)(IF=0.5A, IR=1A)
•
•
VF max=1.5V
Halogen free compliance
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Repetitive Peak Reverse Voltage
VRRM
Average Output Current
Surge Forward Current
IO
IFSM
Junction Temperature
Tj
Storage Temperature
Tstg
Conditions
Ratings
Package Dimensions
unit : mm (typ)
7518-002
unit : mm (typ)
7003-001
40
A
150
°C
--55 to +150
°C
2.3
0.5
0.6
7.5
2.5
0.8
0.8
1.6
0.85
1.2
1
0.5
2
3
0 t o 0.2
0.6
1 : No Contact
2 : Cathode
3 : Anode
4 : Cathode
3
2.3
1.2
5.5
7.0
1.5
7.0
5.5
4
0.85
0.7
0.5
1.5
6.5
5.0
0.5
4
2.3
A
2.3
6.5
5.0
2
V
5
Sine wave 10ms, 1 cycle
Package Dimensions
1
Unit
400
1.2
2.3
2.3
SANYO : TP
SANYO : TP-FA
Product & Package Information
Product & Package Information
• Package : TP
• JEITA, JEDEC : SC-64, TO-251, SOT553
• Minimum Packing Quantity : 500 pcs./bag
• Package : TP-FA
• JEITA, JEDEC : SC-63, TO-252, SOT428
• Minimum Packing Quantity : 700 pcs./reel
Marking(TP, TP-FA)
1 : No Contact
2 : Cathode
3 : Anode
4 : Cathode
Packing Type(TP-FA) : TL
Electrical Connection
3
R0504
LOT No.
TL
2,4
http://semicon.sanyo.com/en/network
O2010SC TKIM TC-00002517 No. A1851-1/3
RD0504T
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Reverse Voltage
VR
VF
IR
Forward Voltage
Reverse Current
min
IR=1mA
IF=5A
typ
trr1
trr2
Thermal Resistance
Rth(j-c)
V
1.2
40
IF=0.5A, IR=1A
Junction -Case
IF -- VF
Unit
max
400
VR=400V
IF=5A, di / dt=100A/μs
Reverse Recovery Time
10
Ratings
Conditions
1.5
V
20
μA
50
ns
17
ns
6
°C / W
IR -- VR
1E+03
°C
Ta=150°C
Reverse Current, IR -- μA
0°
C
10
50°
25°C
0°C
0.2
0.4
0.6
0.8
1.0
1.2
1.4
C -- VR
Interterminal Capacitance, C -- pF
1.6
f=1MHz
5
3
2
10
7
5
3
2
2
3
5 7 1.0
2
3
25°C
5 7 10
Reverse Voltage, VR -- V
1E-03
0
50
100
2
3
5 7 100
IT15989
150
200
250
300
350
Reverse Voltage, VR -- V
IT15987
7
1.0
0.1
50°C
1E-02
Forward Voltage, VF -- V
100
75°C
1E-01
400
450
IT15988
IFSM -- t
45
Surge Forward Current, IFSM(Peak) -- A
0
100°C
1E+00
--25°C
0.01
0.001
C
°C
50°
C 12
5
0.1
125°C
1E+01
Ta=
1
Forward Current, IF -- A
75
1E+02
1.0
40
35
30
25
20
15
0.01
2
3
5
7
0.1
2
Time, t -- s
3
5
7
2
1.0
IT14718
No. A1851-2/3
RD0504T
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not
be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal
system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten
human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they
grant any guarantee thereof. If you should intend to use our products for applications outside the standard
applications of our customer who is considering such use and/or outside the scope of our intended standard
applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the
intended use, our customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are
not guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an
independent device, the customer should always evaluate and test devices mounted in the customer' s
products or equipment.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating
condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
Co.,Ltd. products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures
or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give
rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment,
adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but
are not limited to protective circuits and error prevention circuits for safe design, redundant design, and
structural design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or
otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be
granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any
third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third
party's intellectual property rights which has resulted from the use of the technical information and products
mentioned above.
This catalog provides information as of October, 2010. Specifications and information herein are subject
to change without notice.
PS No. A1851-3/3