R2500F THRU R3000F (DO-41) HIGH VOLTAGE FAST RECOVERY RECTIFIERS Reverse Voltage – 2500 to 3000 Volts Forward Current – 0.2 Amperes Features • Fast switching • Low leakage • High current capability • • High surge capability High reliability Absolute Maximum Ratings and Characteristics Ratings at 250C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Units Symbols R2500F R3000F Maximum recurrent peak reverse voltage VRRM 2500 3000 V Maximum RMS voltage VRMS 1750 2100 V Maximum DC blocking voltage VDC 2500 3000 V Maximum forward voltage at 0.2 A VF 4.0 5.0 V Maximum average forward rectified current .375”(9.5mm) lead length at TA = 50℃ Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) I(AV) 0.2 A IFSM 30 A Maximum reverse current at TA = 25℃ at rated DC blocking voltage TA = 100℃ Maximum full load reverse current average, IR 5.0 100 μA 100 Full cycle 0.375”(9.5mm)lead length at TL = 55℃ Maximum reverse recovery time (Note 1) TRR 500 ns Operating and storage temperature range TJ ,TS -55 to +150 ℃ Notes: (1) Reverse recovery test conditions IF=0.5A, IR=1A, IRR=0.25A. SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 28/05/2005 H R2500F THRU R3000F (DO-41) SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 28/05/2005 H