FR201 THRU FR207 FAST RECOVERY RECTIFIERS Reverse Voltage – 50 to 1000 Volts Forward Current – 2.0 Amperes Features • High Current Capability • Fast switching for high efficiency • Low Leakage. • 2 ampere operation at TA = 55℃ with no thermal runaway Mechanical Data • Case: Molded plastic, DO-15 • Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed. • Polarity: Color band denotes cathode end • Mounting Position: Any Absolute Maximum Ratings and Characteristics Ratings at 25℃ ambient temperature unless otherwise specified, single phase, half wave, 60Hz, resistive or inductive load, for capacitive load, derate current by 20%. Symbols FR FR FR FR FR FR FR 201 202 203 204 205 206 207 Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Average forward rectified current .375” (9.5mm) lead length at TA = 55℃ I(AV) 2 Amp IFSM 70 Amps VF 1.3 Volts IR 500 Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum forward voltage o at 2A DC and 25 C Maximum reverse current TA = 25℃ at rated DC blocking voltage TA = 100℃ Maximum reverse recovery time (Note 1) Typical junction capacitance (Note 2) 5 Trr 150 µA 250 500 nS CJ 35 pF Typical thermal resistance (Note3) RΘJA 22 ℃/W Operating and storage temperature range TJ ,TS -55 to +150 ℃ 1) Reverse recovery test conditions: IF = 0.5A, IR = 1A, Irr = 0.25A. 2) Measured at 1MHZ and applied reverse voltage of 4 VDC . 3) Thermal resistance junction to ambient and form junction to lead at 0.375” (9.5mm) lead length P.C.B. mounted. SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 23/08/2004