TI LM4041C12IDBZR

LM4041
PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE
www.ti.com
SLCS146E – FEBRUARY 2005 – REVISED FEBRUARY 2006
•
FEATURES
•
•
•
•
•
•
Applications
– Data-Acquisition Systems
– Power Supplies and Power-Supply Monitors
– Instrumentation and Test Equipment
– Process Control
– Precision Audio
– Automotive Electronics
– Energy Management/Metering
– Battery-Powered Equipment
1.225-V Fixed and Adjustable Outputs
(1.225 V to 10 V)
Tight Output Tolerances and Low
Temperature Coefficient
– Max 0.1%, 100 ppm/°C – A Grade
– Max 0.2%, 100 ppm/°C – B Grade
– Max 0.5%, 100 ppm/°C – C Grade
– Max 1.0%, 150 ppm/°C – D Grade
Low Output Noise . . . 20 µVRMS (Typ)
Wide Operating Current Range . . .
45 µA (Typ) to 12 mA
Stable With All Capacitive Loads; No Output
Capacitor Required
Available in
– Industrial Temperature: –40°C to 85°C
– Extended Temperature: –40°C to 125°C
1.2 V . . . DBZ (SOT-23) PACKAGE
(TOP VIEW)
CATHODE
1.2 V . . . DCK (SC-70) PACKAGE
(TOP VIEW)
1
ANODE
3 *
CATHODE 3
* Pin 3 must be connected to
ANODE or left open.
Adjustable . . . DBZ (SOT-23) PACKAGE
(TOP VIEW)
FB
CATHODE
1
NC
4
NC
Adjustable . . . DCK (SC-70) PACKAGE
(TOP VIEW)
NC 1
ANODE
2
ANODE
ANODE
CATHODE
NC
NC − No internal connection
* Pin 2 must be connected to
ANODE or left open.
1
3
5
* 2
ANODE 2
1.2 V . . . LP (TO-92/TO-226) PACKAGE
(TOP VIEW)
5 FB
NC − No internal connection
Adjustable . . . LP (TO-92/TO-226) PACKAGE
(TOP VIEW)
ANODE
2
CATHODE 3
CATHODE
4 NC
FB
NC − No internal connection
DESCRIPTION/ORDERING INFORMATION
The LM4041 series of shunt voltage references are versatile, easy-to-use references suitable for a wide array of
applications. They require no external capacitors for operation and are stable with all capacitive loads.
Additionally, the reference offers low dynamic impedance, low noise, and a low temperature coefficient to ensure
a stable output voltage over a wide range of operating currents and temperatures. The LM4041 uses fuse and
Zener-zap reverse breakdown voltage trim during wafer sort to offer four output voltage tolerances, ranging from
0.1% (max) for the A grade to 1% (max) for the D grade. Thus, a great deal of flexibility is offered to designers in
choosing the best cost-to-performance ratio for their applications. The LM4041 is available in a fixed (1.225 V
nominal) or an adjustable version (which requires an external resistor divider to set the output to a value between
1.225 V and 10 V).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2006, Texas Instruments Incorporated
LM4041
PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE
www.ti.com
SLCS146E – FEBRUARY 2005 – REVISED FEBRUARY 2006
Packaged in space-saving SC-70 and SOT-23-3 and requiring a minimum current of 45 µA (typ), the LM4041
also is ideal for portable applications. The TO-92 package also is available for through-hole packaging needs.
The LM4041xI is characterized for operation over an ambient temperature range of –40°C to 85°C. The
LM4041xQ is characterized for operation over an ambient temperature range of –40°C to 125°C.
ORDERING INFORMATION
TA
DEVICE GRADE
A grade:
0.1% initial
accuracy
and
100 ppm/°C
temperature
coefficient
PACKAGE (1)
VZ
SC-70 (DCK)
1.2 V
SOT-23-3 (DBZ)
TO-92/TO-226 (LP)
SC-70 (DCK)
B grade:
0.2% initial
accuracy
and
100 ppm/°C
temperature
coefficient
ADJ
SOT-23-3 (DBZ)
TO-92/TO-226 (LP)
SC-70 (DCK)
1.2 V
SOT-23-3 (DBZ)
TO-92/TO-226 (LP)
SC-70 (DCK)
–40°C to 85°C
C grade:
0.5% initial
accuracy
and
100 ppm/°C
temperature
coefficient
ADJ
SOT-23-3 (DBZ)
TO-92/TO-226 (LP)
SC-70 (DCK)
1.2 V
SOT-23-3 (DBZ)
TO-92/TO-226 (LP)
SC-70 (DCK)
D grade:
1.0% initial
accuracy
and
150 ppm/°C
temperature
coefficient
ADJ
SOT-23-3 (DBZ)
TO-92/TO-226 (LP)
SC-70 (DCK)
1.2 V
SOT-23-3 (DBZ)
TO-92/TO-226 (LP)
(1)
(2)
2
ORDERABLE
PART NUMBER
Reel of 3000
LM4041A12IDCKR
Reel of 3000
LM4041A12IDBZR
Reel of 250
LM4041A12IDBZT
Bulk of 1000
LM4041A12ILP
Reel of 2000
LM4041A12ILPR
Reel of 3000
LM4041BIDCKR
Reel of 250
LM4041BIDCKT
Reel of 3000
LM4041BIDBZR
Reel of 250
LM4041BIDBZT
Bulk of 1000
LM4041BILP
Reel of 2000
LM4041BILPR
Reel of 3000
LM4041B12IDCKR
Reel of 3000
LM4041B12IDBZR
Reel of 250
LM4041B12IDBZT
Bulk of 1000
LM4041B12ILP
Reel of 2000
LM4041B12ILPR
Reel of 3000
LM4041CIDCKR
Reel of 250
LM4041CIDCKT
Reel of 3000
LM4041CIDBZR
Reel of 250
LM4041CIDBZT
Bulk of 1000
LM4041CILP
Reel of 2000
LM4041CILPR
Reel of 3000
LM4041C12IDCKR
Reel of 3000
LM4041C12IDBZR
Reel of 250
LM4041C12IDBZT
Bulk of 1000
LM4041C12ILP
Reel of 2000
LM4041C12ILPR
Reel of 3000
LM4041DIDCKR
Reel of 250
LM4041DIDCKT
Reel of 3000
LM4041DIDBZR
Reel of 250
LM4041DIDBZT
Bulk of 1000
LM4041DILP
Reel of 2000
LM4041DILPR
Reel of 3000
LM4041D12IDCKR
Reel of 3000
LM4041D12IDBZR
Reel of 250
LM4041D12IDBZT
Bulk of 1000
LM4041D12ILP
Reel of 2000
LM4041D12ILPR
TOP-SIDE
MARKING (2)
MK_
4MK_
PREVIEW
MG_
4MG_
PREVIEW
ML_
4ML_
PREVIEW
MH_
4MH_
PREVIEW
MM_
4MM_
PREVIEW
MJ_
4MJ_
PREVIEW
MN_
4MN_
PREVIEW
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
DBZ/DCK: The actual top-side marking has one additional character that designates the assembly/test site.
Submit Documentation Feedback
LM4041
PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE
www.ti.com
SLCS146E – FEBRUARY 2005 – REVISED FEBRUARY 2006
ORDERING INFORMATION
TA
–40°C to 125°C
(1)
(2)
DEVICE GRADE
C grade:
0.5% initial
accuracy
and
100 ppm/°C
temperature
coefficient
D grade:
1.0% initial
accuracy
and
150 ppm/°C
temperature
coefficient
VZ
ADJ
PACKAGE (1)
SOT-23-3 (DBZ)
1.2 V
SOT-23-3 (DBZ)
ADJ
SOT-23-3 (DBZ)
1.2 V
SOT-23-3 (DBZ)
ORDERABLE
PART NUMBER
Reel of 3000
LM4041CQDBZR
Reel of 250
LM4041CQDBZT
Reel of 3000
LM4041C12QDBZR
Reel of 250
LM4041C12QDBZT
Reel of 3000
LM4041DQDBZR
Reel of 250
LM4041DQDBZT
Reel of 3000
LM4041D12QDBZR
Reel of 250
LM4041D12QDBZT
TOP-SIDE
MARKING (2)
4MP_
4MS_
4MR_
4MT_
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
DBZ/DCK: The actual top-side marking has one additional character that designates the assembly/test site.
Submit Documentation Feedback
3
LM4041
PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE
www.ti.com
SLCS146E – FEBRUARY 2005 – REVISED FEBRUARY 2006
FUNCTIONAL BLOCK DIAGRAM
CATHODE
+
_
VREF(1)
(2)
FB(1)
(2)
ANODE
(1) LM4041x (ADJ) only
(2) LM4041x12 only
Absolute Maximum Ratings (1)
over free-air temperature range (unless otherwise noted)
MIN
VZ
Continuous cathode voltage
IZ
Continuous cathode current
θJA
Package thermal impedance (2) (3)
TJ
Operating virtual junction temperature
Tstg
Storage temperature range
(1)
(2)
(3)
–10
MAX
V
25
mA
DBZ package
206
DCK package
252
LP package
156
–65
UNIT
15
°C/W
150
°C
150
°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
The package thermal impedance is calculated in accordance with JESD 51-7.
Recommended Operating Conditions
IZ
Cathode current
VZ
Reverse breakdown voltage (adjustable version)
TA
(1)
4
Free-air temperature
MIN
MAX
(1)
12
mA
10
V
LM4041 (I temperature)
–40
85
LM4041 (Q temperature)
–40
125
See parametric tables
Submit Documentation Feedback
UNIT
°C
LM4041
PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE
www.ti.com
SLCS146E – FEBRUARY 2005 – REVISED FEBRUARY 2006
LM4041x12I Electrical Characteristics
full-range TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
VZ
TEST CONDITIONS
Reverse breakdown
voltage
IZ = 100 µA
Reverse breakdown
voltage tolerance
IZ = 100 µA
IZ,min
Minimum cathode
current
αVZ
Average temperature
coefficient of reverse
breakdown voltage
TYP
1 mA < IZ < 12 mA
TYP
MAX
1.225
–1.2
1.2
–2.4
2.4
–9.2
9.2
–10.4
10.4
45
75
45
80
±20
±20
25°C
±15
±15
±100
25°C
±15
25°C
0.7
Full range
25°C
±100
Full range
mV
µA
ppm/°C
±15
1.5
0.7
2
4
75
80
25°C
UNIT
V
25°C
Full range
IZ,min < IZ < 1 mA
MIN
Full range
25°C
IZ = 1 mA
LM4041B12I
MAX
1.225
Full range
IZ = 100 µA
∆VZ/∆IZ
LM4041A12I
MIN
25°C
IZ = 10 mA
Reverse breakdown
voltage change with
cathode current change
TA
6
1.5
2
4
8
6
mV
8
ZZ
Reverse dynamic
impedance
IZ = 1 mA, f = 120 Hz,
IAC = 0.1 IZ
25°C
0.5
eN
Wideband noise
IZ = 100 µA,
10 Hz ≤ f ≤ 10 kHz
25°C
20
20
µVRMS
Long-term stability of
reverse breakdown
voltage
t = 1000 h,
TA = 25°C ± 0.1°C,
IZ = 100 µA
25°C
120
120
ppm
Submit Documentation Feedback
1.5
0.5
1.5
Ω
5
LM4041
PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE
www.ti.com
SLCS146E – FEBRUARY 2005 – REVISED FEBRUARY 2006
LM4041x12I Electrical Characteristics
full-range TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
VZ
TEST CONDITIONS
Reverse breakdown
voltage
IZ = 100 µA
Reverse breakdown
voltage tolerance
IZ = 100 µA
IZ,min
Minimum cathode
current
αVZ
Average temperature
coefficient of reverse
breakdown voltage
TYP
1 mA < IZ < 12 mA
TYP
MAX
1.225
–6
6
–12
12
–14
14
–24
24
45
75
45
80
±20
±20
25°C
±15
±15
±100
25°C
±15
25°C
0.7
Full range
25°C
±150
Full range
mV
µA
ppm/°C
±15
1.5
0.7
2
2.5
75
80
25°C
UNIT
V
25°C
Full range
IZ,min < IZ < 1 mA
MIN
Full range
25°C
IZ = 1 mA
LM4041D12I
MAX
1.225
Full range
IZ = 100 µA
∆VZ/∆IZ
LM4041C12I
MIN
25°C
IZ = 10 mA
Reverse breakdown
voltage change with
cathode current change
TA
6
2
2.5
2.5
8
8
mV
10
ZZ
Reverse dynamic
impedance
IZ = 1 mA, f = 120 Hz,
IAC = 0.1 IZ
25°C
0.5
eN
Wideband noise
IZ = 100 µA,
10 Hz ≤ f ≤ 10 kHz
25°C
20
20
µVRMS
Long-term stability of
reverse breakdown
voltage
t = 1000 h,
TA = 25°C ± 0.1°C,
IZ = 100 µA
25°C
120
120
ppm
6
Submit Documentation Feedback
1.5
0.5
2
Ω
LM4041
PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE
www.ti.com
SLCS146E – FEBRUARY 2005 – REVISED FEBRUARY 2006
LM4041x12Q Electrical Characteristics
full-range TA = –40°C to 125°C (unless otherwise noted)
PARAMETER
VZ
TEST CONDITIONS
Reverse breakdown
voltage
IZ = 100 µA
Reverse breakdown
voltage tolerance
IZ = 100 µA
IZ,min
Minimum cathode
current
αVZ
Average temperature
coefficient of reverse
breakdown voltage
25°C
Full range
TYP
1 mA < IZ < 12 mA
TYP
MAX
1.225
6
–12
12
18.4
–31
31
45
75
45
80
±20
±20
25°C
±15
±15
±100
25°C
±15
25°C
0.7
Full range
25°C
Full range
25°C
±150
mV
µA
ppm/°C
±15
1.5
0.7
2
2.5
75
80
25°C
UNIT
V
–6
Full range
IZ,min < IZ < 1 mA
MIN
–18.4
25°C
IZ = 1 mA
LM4041D12Q
MAX
1.225
Full range
IZ = 100 µA
∆VZ/∆IZ
LM4041C12Q
MIN
25°C
IZ = 10 mA
Reverse breakdown
voltage change with
cathode current change
TA
6
2.5
2.5
8
0.5
2
8
mV
10
0.5
ZZ
Reverse dynamic
impedance
IZ = 1 mA, f = 120 Hz,
IAC = 0.1 IZ
eN
Wideband noise
IZ = 100 µA,
10 Hz ≤ f ≤ 10 kHz
25°C
20
20
µVRMS
Long-term stability of
reverse breakdown
voltage
t = 1000 h,
TA = 25°C ± 0.1°C,
IZ = 100 µA
25°C
120
120
ppm
Full range
Submit Documentation Feedback
1.5
2
Ω
7
LM4041
PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE
www.ti.com
SLCS146E – FEBRUARY 2005 – REVISED FEBRUARY 2006
LM4041xI (Adjustable Version) Electrical Characteristics
full-range TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
VREF
TEST CONDITIONS
Reference voltage
IZ = 100 µA, VZ = 5 V
Reference voltage
tolerance (1)
IZ = 100 µA, VZ = 5 V
IZ,min
Minimum cathode
current
∆VREF/∆IZ
Reference voltage
change with cathode
current change
∆VREF/∆VKA
Reference voltage
change with output
voltage change
IFB
Feedback current
αVREF
Average temperature
coefficient of
reference voltage (1)
eN
(1)
8
LM4041BI
MIN
25°C
TYP
1 mA < IZ < 12 mA
MAX
1.233
–2.5
2.5
–6.2
6.2
10.5
–14
14
45
25°C
0.7
1.5
2
4
–1.55
–2
0.7
2
4
–1.55
–2
100
–2.5
60
120
25°C
±20
25°C
±15
100
120
mV
mV/V
nA
±20
±15
±100
Full range
µA
6
–2.5
60
mV
1.5
2
6
Full range
75
80
2
Full range
25°C
45
80
Full range
25°C
75
UNIT
V
–10.5
Full range
IZ = 1 mA, VZ = 5 V
TYP
25°C
25°C
IZ = 1 mA
MIN
Full range
Full range
IZ,min < IZ < 1 mA
LM4041CI
MAX
1.233
25°C
IZ = 10 mA, VZ = 5 V
ZZ
TA
±100
ppm/°C
IZ = 100 µA, VZ = 5 V
25°C
±15
±15
IZ = 1 mA, f = 120 Hz,
IAC = 0.1 IZ, VZ = VREF
25°C
0.3
0.3
IZ = 1 mA, f = 120 Hz,
IAC = 0.1 IZ, VZ = 10 V
25°C
2
2
Wideband noise
IZ = 100 µA, VZ = VREF,
10 Hz ≤ f ≤ 10 kHz
25°C
20
20
µVRMS
Long-term stability of
reverse breakdown
voltage
t = 1000 h,
TA = 25°C ± 0.1°C,
IZ = 100 µA
25°C
120
120
ppm
Reverse dynamic
impedance
Ω
Reference voltage tolerance and average temperature coefficient change with output voltage (VZ). See Typical Characteristics.
Submit Documentation Feedback
LM4041
PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE
www.ti.com
SLCS146E – FEBRUARY 2005 – REVISED FEBRUARY 2006
LM4041xI (Adjustable Version) Electrical Characteristics
full-range TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
VREF
IZ,min
∆VREF/∆IZ
TEST CONDITIONS
Reference voltage
IZ = 100 µA, VZ = 5 V
Reference voltage tolerance (1)
IZ = 100 µA, VZ = 5 V
Reference voltage change
with output voltage change
IFB
Feedback current
IZ,min < IZ < 1 mA
IZ = 1 mA
ZZ
eN
(1)
Average temperature coefficient
of reference voltage (1)
25°C
–12
12
–24
24
45
25°C
25°C
0.7
mV
µA
2
2.5
2
6
–1.55
–2
Full range
25°C
75
80
Full range
UNIT
V
Full range
mV
8
Full range
25°C
IZ = 1 mA, VZ = 5 V
MAX
1.233
–3
60
Full range
IZ = 10 mA, VZ = 5 V
αVREF
TYP
Full range
1 mA < IZ < 12 mA
∆VREF/∆VKA
LM4041DI
MIN
25°C
25°C
Minimum cathode current
Reference voltage change
with cathode current change
TA
150
200
25°C
±20
25°C
±15
±150
Full range
mV/V
nA
ppm/°C
IZ = 100 µA, VZ = 5 V
25°C
±15
IZ = 1 mA, f = 120 Hz,
IAC = 0.1 IZ, VZ = VREF
25°C
0.3
IZ = 1 mA, f = 120 Hz,
IAC = 0.1 IZ, VZ = 10 V
25°C
2
Wideband noise
IZ = 100 µA, VZ = VREF,
10 Hz ≤ f ≤ 10 kHz
25°C
20
µVRMS
Long-term stability
of reverse breakdown voltage
t = 1000 h,
TA = 25°C ± 0.1°C,
IZ = 100 µA
25°C
120
ppm
Reverse dynamic impedance
Ω
Reference voltage tolerance and average temperature coefficient change with output voltage (VZ). See Typical Characteristics.
Submit Documentation Feedback
9
LM4041
PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE
www.ti.com
SLCS146E – FEBRUARY 2005 – REVISED FEBRUARY 2006
LM4041xQ (Adjustable Version) Electrical Characteristics
full-range TA = –40°C to 125°C (unless otherwise noted)
PARAMETER
VREF
TEST CONDITIONS
Reference voltage
IZ = 100 µA, VZ = 5 V
Reference voltage
tolerance (1)
IZ = 100 µA, VZ = 5 V
IZ,min
Minimum cathode
current
∆VREF/∆IZ
Reference voltage
change with cathode
current change
∆VREF/∆VKA
Reference voltage
change with output
voltage change
IFB
Feedback current
αVREF
Average temperature
coefficient of
reference voltage (1)
eN
(1)
10
LM4041CQ
MIN
25°C
TYP
1 mA < IZ < 12 mA
MAX
1.233
6.2
–12
12
–18
18
–30
30
45
25°C
0.7
1.5
2
4
–1.55
–2
0.7
2
6
–1.55
–2.5
100
–4
60
120
25°C
±20
25°C
±15
150
200
mV
mV/V
nA
±20
±15
±100
Full range
µA
10
–3
60
mV
2
2.5
8
Full range
75
80
2
Full range
25°C
45
80
Full range
25°C
75
UNIT
V
–6.2
Full range
IZ = 1 mA, VZ = 5 V
TYP
25°C
25°C
IZ = 1 mA
MIN
Full range
Full range
IZ,min < IZ < 1 mA
LM4041DQ
MAX
1.233
25°C
IZ = 10 mA, VZ = 5 V
ZZ
TA
±150
ppm/°C
IZ = 100 µA, VZ = 5 V
25°C
±15
±15
IZ = 1 mA, f = 120 Hz,
IAC = 0.1 IZ, VZ = VREF
25°C
0.3
0.3
IZ = 1 mA, f = 120 Hz,
IAC = 0.1 IZ, VZ = 10 V
25°C
2
2
Wideband noise
IZ = 100 µA, VZ = VREF,
10 Hz ≤ f ≤ 10 kHz
25°C
20
20
µVRMS
Long-term stability of
reverse breakdown
voltage
t = 1000 h,
TA = 25°C ± 0.1°C,
IZ = 100 µA
25°C
120
120
ppm
Reverse dynamic
impedance
Ω
Reference voltage tolerance and average temperature coefficient change with output voltage (VZ). See Typical Characteristics.
Submit Documentation Feedback
LM4041
PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE
www.ti.com
SLCS146E – FEBRUARY 2005 – REVISED FEBRUARY 2006
TYPICAL CHARACTERISTICS
0.5
1000
IZ = 150 A
VREF = 1.2 V
0.4
0.3
800
Noise Voltage (nV/Hz)
Reference Voltage (V)
−9.9 ppm/C
0.2
2.7 ppm/C
0.1
0
−0.1
21 ppm/C
−0.2
−0.3
600
400
200
−0.4
−0.5
−40
−20
0
20
40
60
80
0
100
1
10
3
1.235
125C
1.234
0
1
−5
VZ
−10
0.5
VIN (V)
1.5
Reference Voltage (V)
VIN
VZ (V)
LM4041 (Adj)
IZ = 1 mA
10
5
10k
<br/>
1.2345
2
1k
Figure 2. Noise Voltage vs Frequency
15
2.5
100
Frequency (Hz)
Temperature (C)
Figure 1. Temperature Drift for Different Average
Temperature Coefficients
85C
1.2335
−40C
25C
1.233
1.2325
1.232
1.2315
−15
0
−20
26
−0.5
−2
2
6
10
14
18
22
1.231
1.2305
0
4
6
8
10
Reverse (Output) Voltage (V)
Time (s)
Figure 3. Start-Up Characteristics
<br/>
2
Figure 4. Reference Voltage vs Reverse (Output) Voltage
(for Different Temperatures)
Submit Documentation Feedback
11
LM4041
PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE
www.ti.com
SLCS146E – FEBRUARY 2005 – REVISED FEBRUARY 2006
TYPICAL CHARACTERISTICS
1.235
100
LM4041 (Adj)
IZ = 1 mA
1.2345
90
125C
85C
80
VREF
Feedback Current (nA)
Reference Voltage (V)
1.234
LM4041 (Adj)
IZ = 1 mA
1.2335
1.233
5V
1.2325
1.232
1.2315
25C
70
−40C
60
50
40
30
10 V
20
1.231
10
1.2305
−40
−20
0
20
40
60
80
0
100
Temperature (C)
2
4
6
8
10
Reverse (Output) Voltage (V)
Figure 6. Feedback Current vs Reverse (Output) Voltage
(for Different Temperatures)
Figure 5. Reference Voltage vs Temperature
(for Different Reverse Voltages)
1000
1000
LM4041 (Adj)
IZ = 1 mA
IZ = 0.1 IZ
Tj = 25C
100
CL = 0 F
10
10 V
Impedance (Ω)
Capacitor
Line
100
Impedance ()
0
CL = 0 F
Capacitor
Line
LM4041 (Adj)
IZ = 150 A
IZ = 0.1 IZ
Tj = 25°C
10 V
10
5V
5V
CL = 1 F
CL = 1 F
1.23 V
1
1
2.5 V
1.23 V
2.5 V
0.1
0.1
100
1k
10k
100k
1M
100
1k
Frequency (Hz)
100k
Frequency (Hz)
Figure 7. Output Impedance vs Frequency
12
10k
Figure 8. Output Impedance vs Frequency
Submit Documentation Feedback
1M
LM4041
PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE
www.ti.com
SLCS146E – FEBRUARY 2005 – REVISED FEBRUARY 2006
TYPICAL CHARACTERISTICS
FB Steps (V)
(see Figure 12)
0
100
2
4
6
100
8
90
LM4041 (Adj)
VZ = 1.23 V (nominal)
90
80
Reverse Current (A)
Reverse Current (A)
80
70
60
50
40
30
70
60
50
40
30
20
20
LM4041 (Adj)
IZ = 1 mA
10
10
0
0
1
2
3
4
5
6
7
8
9
10
Reverse (Output) Voltage (V)
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
Reverse (Output) Voltage (V)
Figure 10. Reverse Characteristics and Minumum
Operating Current
Figure 9. Reverse Characteristics
<br/>
1.6
0
LM4041 (Adj)
VAdj = VREF + 5 mV
1.4
Output Saturation (V)
1.2
−40C
1
25C
85C
0.8
125C
0.6
0.4
0.2
0
0
1
2
3
4
5
6
7
8
9
10 11
12
Output Current (mA)
Figure 11. Output Saturation vs Output Current
Submit Documentation Feedback
13
LM4041
PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE
www.ti.com
SLCS146E – FEBRUARY 2005 – REVISED FEBRUARY 2006
APPLICATION INFORMATION
RS 30 k
VIN
LM4041-1.2
VZ
1-Hz rate
Figure 12. Startup Characteristics Test Circuit
IR
(+)
LM4041 (Adj)
(−)
2 V/step
V
Figure 13. Reverse Characteristics Test Circuit
Output Capacitor
The LM4041 does not require an output capacitor across CATHODE and ANODE for stability. However, if an
output bypass capacitor is desired, the LM4041 is designed to be stable with all capacitive loads.
SOT-23 and SC-70 Pin Connections
There is a parasitic Schottky diode connected between pins 2 and 3 of the SOT-23 packaged device. Thus, pin 3
of the SOT-23 package must be left floating or connected to pin 2. Similarly, pin 2 of the SC-70 package also
must be left floating or connected to pin 1.
14
Submit Documentation Feedback
LM4041
PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE
www.ti.com
SLCS146E – FEBRUARY 2005 – REVISED FEBRUARY 2006
APPLICATION INFORMATION
Adjustable Version
The adjustable version allows VZ to be set by a user-defined resistor divider. The output voltage, VZ, is set
according to the equation shown in Figure 14.
VS
RS
VREF
LM4041
VZ = VREF 1 R2
R1
+
R1
−
(Adjustable)
R2
Figure 14. Adjustable Shunt Regulator
Cathode and Load Currents
In a typical shunt regulator configuration (see Figure 15), an external resistor, RS, is connected between the
supply and the cathode of the LM4041. RS must be set properly, as it sets the total current available to supply
the load (IL) and bias the LM4041 (IZ). In all cases, IZ must stay within a specified range for proper operation of
the reference. Taking into consideration one extreme in the variation of the load and supply voltage (maximum IL
and minimum VS), RS must be small enough to supply the minimum IZ required for operation of the regulator, as
given by data sheet parameters. At the other extreme, maximum VS and minimum IL, RS must be large enough to
limit IZ to less than its maximum recommended rating of 12 mA.
RS is calculated as shown in Equation 1.
VS VZ
RS (I L I Z)
(1)
VS
RS
IZ + IL
IL
VZ
IZ
LM4041
Figure 15. Shunt Regulator
Submit Documentation Feedback
15
PACKAGE OPTION ADDENDUM
www.ti.com
24-Mar-2008
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
LM4041A12IDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041A12IDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041A12IDBZT
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041A12IDBZTG4
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041A12IDCKR
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041A12IDCKRE4
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041A12IDCKRG4
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TBD
Lead/Ball Finish
LM4041A12ILP
PREVIEW
TO-92
LP
3
1000
LM4041B12IDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041B12IDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041B12IDBZT
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041B12IDBZTG4
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041B12IDCKR
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041B12IDCKRE4
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041B12IDCKRG4
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Call TI
Call TI
LM4041B12ILP
PREVIEW
TO-92
LP
3
1000
LM4041BIDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041BIDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041BIDBZT
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041BIDBZTG4
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041BIDCKR
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041BIDCKRE4
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041BIDCKRG4
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041BIDCKT
ACTIVE
SC70
DCK
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041BIDCKTE4
ACTIVE
SC70
DCK
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041BIDCKTG4
ACTIVE
SC70
DCK
5
250
Green (RoHS &
CU NIPDAU
Level-1-260C-UNLIM
Addendum-Page 1
TBD
Call TI
MSL Peak Temp (3)
Call TI
PACKAGE OPTION ADDENDUM
www.ti.com
24-Mar-2008
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
LM4041BILP
PREVIEW
TO-92
LP
3
1000
TBD
TBD
Lead/Ball Finish
MSL Peak Temp (3)
no Sb/Br)
Call TI
Call TI
Call TI
Call TI
LM4041BILPR
PREVIEW
TO-92
LP
3
2000
LM4041C12IDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041C12IDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041C12IDBZT
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041C12IDBZTG4
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041C12IDCKR
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041C12IDCKRE4
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041C12IDCKRG4
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041C12ILP
ACTIVE
TO-92
LP
3
1000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
LM4041C12ILPE3
ACTIVE
TO-92
LP
3
1000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
LM4041C12ILPR
ACTIVE
TO-92
LP
3
2000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
LM4041C12ILPRE3
ACTIVE
TO-92
LP
3
2000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
LM4041C12QDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041C12QDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041C12QDBZT
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041C12QDBZTG4
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041CIDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041CIDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041CIDBZT
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041CIDBZTG4
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041CIDCKR
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041CIDCKRE4
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041CIDCKRG4
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041CIDCKT
ACTIVE
SC70
DCK
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041CIDCKTE4
ACTIVE
SC70
DCK
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com
24-Mar-2008
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
LM4041CIDCKTG4
ACTIVE
SC70
DCK
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
LM4041CILP
ACTIVE
TO-92
LP
3
1000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
LM4041CILPE3
ACTIVE
TO-92
LP
3
1000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
LM4041CILPR
ACTIVE
TO-92
LP
3
2000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
LM4041CILPRE3
ACTIVE
TO-92
LP
3
2000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
LM4041CQDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041CQDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041CQDBZT
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041CQDBZTG4
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041D12IDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041D12IDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041D12IDBZT
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041D12IDBZTG4
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041D12IDCKR
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041D12IDCKRE4
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041D12IDCKRG4
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041D12ILP
ACTIVE
TO-92
LP
3
1000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
LM4041D12ILPE3
ACTIVE
TO-92
LP
3
1000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
LM4041D12ILPR
ACTIVE
TO-92
LP
3
2000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
LM4041D12ILPRE3
ACTIVE
TO-92
LP
3
2000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
LM4041D12QDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041D12QDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041D12QDBZT
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041D12QDBZTG4
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041DIDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041DIDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Addendum-Page 3
Lead/Ball Finish
MSL Peak Temp (3)
Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com
24-Mar-2008
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
LM4041DIDBZT
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041DIDBZTG4
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041DIDCKR
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041DIDCKRE4
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041DIDCKRG4
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041DIDCKT
ACTIVE
SC70
DCK
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041DIDCKTE4
ACTIVE
SC70
DCK
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041DIDCKTG4
ACTIVE
SC70
DCK
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041DILP
ACTIVE
TO-92
LP
3
1000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
LM4041DILPE3
ACTIVE
TO-92
LP
3
1000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
LM4041DILPR
ACTIVE
TO-92
LP
3
2000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
LM4041DILPRE3
ACTIVE
TO-92
LP
3
2000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
LM4041DQDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041DQDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041DQDBZT
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM4041DQDBZTG4
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Addendum-Page 4
PACKAGE OPTION ADDENDUM
www.ti.com
24-Mar-2008
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 5
PACKAGE MATERIALS INFORMATION
www.ti.com
22-Mar-2008
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
LM4041A12IDBZR
SOT-23
3000
179.0
DBZ
3
Reel
Reel
Diameter Width
(mm) W1 (mm)
A0 (mm)
B0 (mm)
K0 (mm)
P1
(mm)
W
Pin1
(mm) Quadrant
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041A12IDBZT
SOT-23
DBZ
3
250
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041A12IDCKR
SC70
DCK
5
3000
179.0
8.4
2.2
2.5
1.2
4.0
8.0
Q3
LM4041B12IDBZR
SOT-23
DBZ
3
3000
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041B12IDBZT
SOT-23
DBZ
3
250
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041B12IDCKR
SC70
DCK
5
3000
179.0
8.4
2.2
2.5
1.2
4.0
8.0
Q3
LM4041BIDBZR
SOT-23
DBZ
3
3000
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041BIDBZT
SOT-23
DBZ
3
250
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041BIDCKR
SC70
DCK
5
3000
179.0
8.4
2.2
2.5
1.2
4.0
8.0
Q3
LM4041BIDCKT
SC70
DCK
5
250
179.0
8.4
2.2
2.5
1.2
4.0
8.0
Q3
LM4041C12IDBZR
SOT-23
DBZ
3
3000
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041C12IDBZT
SOT-23
DBZ
3
250
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041C12IDCKR
SC70
DCK
5
3000
179.0
8.4
2.2
2.5
1.2
4.0
8.0
Q3
LM4041C12QDBZR
SOT-23
DBZ
3
3000
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041C12QDBZT
SOT-23
DBZ
3
250
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041CIDBZR
SOT-23
DBZ
3
3000
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041CIDBZT
SOT-23
DBZ
3
250
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041CIDCKR
SC70
DCK
5
3000
179.0
8.4
2.2
2.5
1.2
4.0
8.0
Q3
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
Device
22-Mar-2008
Package Package Pins
Type Drawing
SPQ
Reel
Reel
Diameter Width
(mm) W1 (mm)
A0 (mm)
B0 (mm)
K0 (mm)
P1
(mm)
W
Pin1
(mm) Quadrant
LM4041CIDCKT
SC70
DCK
5
250
179.0
8.4
2.2
2.5
1.2
4.0
8.0
Q3
LM4041CQDBZR
SOT-23
DBZ
3
3000
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041CQDBZT
SOT-23
DBZ
3
250
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041D12IDBZR
SOT-23
DBZ
3
3000
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041D12IDBZT
SOT-23
DBZ
3
250
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041D12IDCKR
SC70
DCK
5
3000
179.0
8.4
2.2
2.5
1.2
4.0
8.0
Q3
LM4041D12QDBZR
SOT-23
DBZ
3
3000
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041D12QDBZT
SOT-23
DBZ
3
250
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041DIDBZR
SOT-23
DBZ
3
3000
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041DIDBZT
SOT-23
DBZ
3
250
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041DIDCKR
SC70
DCK
5
3000
179.0
8.4
2.2
2.5
1.2
4.0
8.0
Q3
LM4041DIDCKT
SC70
DCK
5
250
179.0
8.4
2.2
2.5
1.2
4.0
8.0
Q3
LM4041DQDBZR
SOT-23
DBZ
3
3000
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
LM4041DQDBZT
SOT-23
DBZ
3
250
179.0
8.4
3.15
2.95
1.22
4.0
8.0
Q3
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LM4041A12IDBZR
SOT-23
DBZ
3
3000
195.0
200.0
45.0
LM4041A12IDBZT
SOT-23
DBZ
3
250
195.0
200.0
45.0
LM4041A12IDCKR
SC70
DCK
5
3000
195.0
200.0
45.0
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
22-Mar-2008
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LM4041B12IDBZR
SOT-23
DBZ
3
3000
195.0
200.0
45.0
LM4041B12IDBZT
SOT-23
DBZ
3
250
195.0
200.0
45.0
LM4041B12IDCKR
SC70
DCK
5
3000
195.0
200.0
45.0
LM4041BIDBZR
SOT-23
DBZ
3
3000
195.0
200.0
45.0
LM4041BIDBZT
SOT-23
DBZ
3
250
195.0
200.0
45.0
LM4041BIDCKR
SC70
DCK
5
3000
195.0
200.0
45.0
LM4041BIDCKT
SC70
DCK
5
250
195.0
200.0
45.0
LM4041C12IDBZR
SOT-23
DBZ
3
3000
195.0
200.0
45.0
LM4041C12IDBZT
SOT-23
DBZ
3
250
195.0
200.0
45.0
LM4041C12IDCKR
SC70
DCK
5
3000
195.0
200.0
45.0
LM4041C12QDBZR
SOT-23
DBZ
3
3000
195.0
200.0
45.0
LM4041C12QDBZT
SOT-23
DBZ
3
250
195.0
200.0
45.0
LM4041CIDBZR
SOT-23
DBZ
3
3000
195.0
200.0
45.0
LM4041CIDBZT
SOT-23
DBZ
3
250
195.0
200.0
45.0
LM4041CIDCKR
SC70
DCK
5
3000
195.0
200.0
45.0
LM4041CIDCKT
SC70
DCK
5
250
195.0
200.0
45.0
LM4041CQDBZR
SOT-23
DBZ
3
3000
195.0
200.0
45.0
LM4041CQDBZT
SOT-23
DBZ
3
250
195.0
200.0
45.0
LM4041D12IDBZR
SOT-23
DBZ
3
3000
220.0
205.0
50.0
LM4041D12IDBZT
SOT-23
DBZ
3
250
195.0
200.0
45.0
LM4041D12IDCKR
SC70
DCK
5
3000
195.0
200.0
45.0
LM4041D12QDBZR
SOT-23
DBZ
3
3000
195.0
200.0
45.0
LM4041D12QDBZT
SOT-23
DBZ
3
250
195.0
200.0
45.0
LM4041DIDBZR
SOT-23
DBZ
3
3000
195.0
200.0
45.0
LM4041DIDBZT
SOT-23
DBZ
3
250
195.0
200.0
45.0
LM4041DIDCKR
SC70
DCK
5
3000
195.0
200.0
45.0
LM4041DIDCKT
SC70
DCK
5
250
195.0
200.0
45.0
LM4041DQDBZR
SOT-23
DBZ
3
3000
195.0
200.0
45.0
LM4041DQDBZT
SOT-23
DBZ
3
250
195.0
200.0
45.0
Pack Materials-Page 3
MECHANICAL DATA
MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001
LP (O-PBCY-W3)
PLASTIC CYLINDRICAL PACKAGE
0.205 (5,21)
0.175 (4,44)
0.165 (4,19)
0.125 (3,17)
DIA
0.210 (5,34)
0.170 (4,32)
Seating
Plane
0.157 (4,00) MAX
0.050 (1,27)
C
0.500 (12,70) MIN
0.104 (2,65)
FORMED LEAD OPTION
0.022 (0,56)
0.016 (0,41)
0.016 (0,41)
0.014 (0,35)
STRAIGHT LEAD OPTION
D
0.135 (3,43) MIN
0.105 (2,67)
0.095 (2,41)
0.055 (1,40)
0.045 (1,14)
1
2
3
0.105 (2,67)
0.080 (2,03)
0.105 (2,67)
0.080 (2,03)
4040001-2 /C 10/01
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Lead dimensions are not controlled within this area
D. FAlls within JEDEC TO -226 Variation AA (TO-226 replaces TO-92)
E. Shipping Method:
Straight lead option available in bulk pack only.
Formed lead option available in tape & reel or ammo pack.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
MECHANICAL DATA
MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001
LP (O-PBCY-W3)
PLASTIC CYLINDRICAL PACKAGE
0.539 (13,70)
0.460 (11,70)
1.260 (32,00)
0.905 (23,00)
0.650 (16,50)
0.610 (15,50)
0.020 (0,50) MIN
0.098 (2,50)
0.384 (9,75)
0.335 (8,50)
0.748 (19,00)
0.217 (5,50)
0.433 (11,00)
0.335 (8,50)
0.748 (19,00)
0.689 (17,50)
0.114 (2,90)
0.094 (2,40)
0.114 (2,90)
0.094 (2,40)
0.169 (4,30)
0.146 (3,70)
DIA
0.266 (6,75)
0.234 (5,95)
0.512 (13,00)
0.488 (12,40)
TAPE & REEL
4040001-3 /C 10/01
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Tape and Reel information for the Format Lead Option package.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
Logic
Power Mgmt
Microcontrollers
RFID
RF/IF and ZigBee® Solutions
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/lprf
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Military
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated