TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T − JULY 1996 − REVISED JUNE 2007 D Low-Voltage Operation . . . VREF = 1.24 V D Adjustable Output Voltage, VO = VREF to 6 V D Reference Voltage Tolerances at 255C D D Low Operational Cathode Current . . . 80 µA Typ D 0.25-Ω Typical Output Impedance D Ultra-Small SC-70 Package Offers 40% − 0.5% for TLV431B − 1% for TLV431A − 1.5% for TLV431 Typical Temperature Drift − 4 mV (05C to 705C) − 6 mV (–405C to 855C) − 11 mV (–405C to 1255C) D DBV (SOT-23-5) PACKAGE (TOP VIEW) D (SOIC) PACKAGE (TOP VIEW) CATHODE ANODE ANODE NC 1 8 2 7 3 6 4 5 REF ANODE ANODE NC NC * CATHODE ANODE CATHODE 2 ANODE 1 1 5 ANODE DBZ (SOT-23-3) PACKAGE (TOP VIEW) REF 1 3 2 3 4 REF CATHODE ANODE 2 NC − No internal connection * For TLV431, TLV431A: NC − No internal connection * For TLV431B: Pin 2 is attached to Substrate and must be connected to ANODE or left open. PK (SOT-89) PACKAGE (TOP VIEW) 3 Smaller Footprint Than SOT-23-3 See TLVH431 and TLVH432 for − Wider VKA (1.24 V to 18 V) and IK (80 mA) − Additional SOT-89 Package − Multiple Pinouts for SOT-23-3 and SOT-89 Packages REF DCK (SC-70) PACKAGE (TOP VIEW) CATHODE NC REF 1 6 2 5 3 4 ANODE NC NC LP (TO-92/TO-226) PACKAGE (TOP VIEW) CATHODE ANODE REF NC − No internal connection description/ordering information The TLV431 is a low-voltage 3-terminal adjustable voltage reference with specified thermal stability over applicable industrial and commercial temperature ranges. Output voltage can be set to any value between VREF (1.24 V) and 6 V with two external resistors (see Figure 2). These devices operate from a lower voltage (1.24 V) than the widely used TL431 and TL1431 shunt-regulator references. When used with an optocoupler, the TLV431 is an ideal voltage reference in isolated feedback circuits for 3-V to 3.3-V switching-mode power supplies. These devices have a typical output impedance of 0.25 Ω. Active output circuitry provides a very sharp turn-on characteristic, making them excellent replacements for low-voltage Zener diodes in many applications, including on-board regulation and adjustable power supplies. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2007, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T − JULY 1996 − REVISED JUNE 2007 ORDERING INFORMATION TJ 255C VREF TOLERANCE SC 70 (DCK) SC-70 SOT 23 5 (DBV) SOT-23-5 0.5% SOT 23 3 (DBZ) SOT-23-3 SOT-89 (PK) TO 92 (LP) TO-92 0°C to 70°C SOT 23 5 (DBV) SOT-23-5 1% SOT-23-3 (DBZ) TO 92 (LP) TO-92 SOT 23 5 (DBV) SOT-23-5 1.5% ORDERABLE PART NUMBER PACKAGE† SOT-23-3 (DBZ) TO 92 (LP) TO-92 Reel of 3000 TLV431BCDCKR Reel of 250 TLV431BCDCKT Reel of 3000 TLV431BCDBVR Reel of 250 TLV431BCDBVT Reel of 3000 TLV431BCDBZR Reel of 250 TLV431BCDBZT Reel of 1000 TLV431BCPK Bulk of 1000 TLV431BCLP Reel of 2000 TLV431BCLPR Reel of 3000 TLV431ACDBVR Reel of 250 TLV431ACDBVT Reel of 3000 TLV431ACDBZR Bulk of 1000 TLV431ACLP Reel of 2000 TLV431ACLPR Reel of 3000 TLV431CDBVR Reel of 250 TLV431CDBVT Reel of 3000 TLV431CDBZR Bulk of 1000 TLV431CLP Reel of 2000 TLV431CLPR † TOP-SIDE MARKING‡ YE YE_ Y3G Y3G_ Y3G Y3G_ VE TV431B YAC YAC_ YAC_ V431AC Y3C Y3C_ Y3C_ V431C Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. ‡ DBV/DBZ/DCK: The actual top-side marking has one additional character that designates the wafer fab/assembly site. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T − JULY 1996 − REVISED JUNE 2007 ORDERING INFORMATION (continued) TJ 255C VREF TOLERANCE TLV431BIDCKR Reel of 250 TLV431BIDCKT Reel of 3000 TLV431BIDBVR Reel of 250 TLV431BIDBVT Reel of 3000 TLV431BIDBZR Reel of 250 TLV431BIDBZT Bulk of 1000 TLV431BILP Reel of 2000 TLV431BILPR Tube of 75 TLV431AID Reel of 2500 TLV431AIDR Reel of 3000 TLV431AIDBVR Reel of 250 TLV431AIDBVT SOT-23-3 (DBZ) Reel of 3000 TLV431AIDBZR YAI_ SOT-89 (PK) Reel of 1000 TLV431BIPK VF Bulk of 1000 TLV431AILP Ammo of 2000 TLV431AILPM Reel of 2000 TLV431AILPR Reel of 3000 TLV431IDBVR Reel of 250 TLV431IDBVT Reel of 3000 TLV431IDBZR Bulk of 1000 TLV431ILP Reel of 2000 TLV431ILPR Reel of 3000 TLV431BQDCKR Reel of 250 TLV431BQDCKT Reel of 3000 TLV431BQDBVR Reel of 250 TLV431BQDBVT Reel of 3000 TLV431BQDBZR Reel of 250 TLV431BQDBZT Reel of 1000 TLV431BQPK Bulk of 1000 TLV431BQLP Reel of 2000 TLV431BQLPR SOT 23 5 (DBV) SOT-23-5 0 5% 0.5% SOT 23 3 (DBZ) SOT-23-3 TO 92 (LP) TO-92 SOIC (D) SOT 23 5 (DBV) SOT-23-5 1% TO-92 TO 92 (LP) SOT 23 5 (DBV) SOT-23-5 1.5% SOT-23-3 (DBZ) TO 92 (LP) TO-92 SC 70 (DCK) SC-70 SOT 23 5 (DBV) SOT-23-5 0.5% TOP-SIDE MARKING‡ Reel of 3000 SC 70 (DCK) SC-70 −40°C to 85°C ORDERABLE PART NUMBER PACKAGE† SOT 23 3 (DBZ) SOT-23-3 −40°C 125°C 40 C to 125 C SOT-89 (PK) TO 92 (LP) TO-92 YF YF_ Y3F Y3F_ Y3F Y3F_ TY431B TY431A YAI YAI_ V431AI Y3I Y3I_ Y3I_ V431I YG YG_ Y3H Y3H_ Y3H Y3H_ V6 TQ431B 1% SOT-89 (PK) Reel of 1000 TLV431AQPK VA 1.5% SOT-89 (PK) Reel of 1000 TLV431QPK VB † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. ‡ DBV/DBZ/DCK: The actual top-side marking has one additional character that designates the assembly/test site. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T − JULY 1996 − REVISED JUNE 2007 logic block diagram CATHODE REF + − VREF = 1.24 V ANODE equivalent schematic CATHODE REF ANODE 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T − JULY 1996 − REVISED JUNE 2007 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Cathode voltage, VKA (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Continuous cathode current range, IK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −20 mA to 20 mA Reference current range, Iref . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.05 mA to 3 mA Package thermal impedance, θJA (see Notes 2 and 3): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97°C/W DBV package . . . . . . . . . . . . . . . . . . . . . . . . 206°C/W DBZ package . . . . . . . . . . . . . . . . . . . . . . . . . 206°C/W DCK package . . . . . . . . . . . . . . . . . . . . . . . . 252°C/W LP package . . . . . . . . . . . . . . . . . . . . . . . . . . 140°C/W PK package . . . . . . . . . . . . . . . . . . . . . . . . . . . 52°C/W Operating virtual junction temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Voltage values are with respect to the anode terminal, unless otherwise noted. 2. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. 3. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions MIN MAX VKA Cathode voltage VREF 6 V IK Cathode current 0.1 15 mA 0 70 TA Operating p g free-air temperature p range g TLV431_C POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TLV431_I −40 85 TLV431_Q −40 125 UNIT °C 5 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T − JULY 1996 − REVISED JUNE 2007 TLV431 electrical characteristics at 25°C free-air temperature (unless otherwise noted) TLV431 PARAMETER TEST CONDITIONS TA = 25°C VREF VKA = VREF, IK = 10 mA Reference voltage TA = full range (see Note 4 and Figure 1) VREF(dev) A VKA = VREF, IK = 10 mA (see Note 4 and Figure 1) TYP MAX 1.222 1.24 1.258 TLV431C 1.21 1.27 TLV431I 1.202 1.278 TLV431Q 1.194 TLV431C i ti over full f ll VREF d deviation temperature range (see Note 4) MIN UNIT V 1.286 4 12 TLV431I 6 20 TLV431Q 11 31 mV ∆VREF ∆VKA Ratio of VREF change in cathode voltage change VKA = VREF to 6 V, IK = 10 mA (see Figure 2) −1.5 −2.7 mV/V Iref Reference terminal current IK = 10 mA, R1 = 10 kΩ, R2 = open (see Figure 2) 0.15 0.5 µA TLV431C 0 05 0.05 0 0.3 3 Iref(dev) d i ti over full f ll Iref deviation temperature range (see Note 4) A R1 = 10 kΩ, kΩ R2 = open IK = 10 mA, (see Note 4 and Figure 2) TLV431I 0.1 0.4 TLV431Q 0.15 0.5 µA TLV431C/I 55 80 TLV431Q 55 100 VREF = 0, VKA = 6 V (see Figure 3) 0.001 0.1 µA VKA = VREF, f ≤ 1 kHz, IK = 0.1 mA to 15 mA (see Figure 1) 0.25 0.4 Ω IK(min) Minimum cathode current for regulation VKA = VREF (see Figure 1) IK(off) Off-state cathode current |zKA| Dynamic impedance (see Note 5) A µA NOTES: 4. Full temperature ranges are − 40°C to 125°C for TLV431Q, − 40°C to 85°C for TLV431I, and 0°C to 70°C for TLV431C. 5. The deviation parameters VREF(dev) and Iref(dev) are defined as the differences between the maximum and minimum values obtained over the rated temperature range. The average full-range temperature coefficient of the reference input voltage, αVREF, is defined as: V REF(dev) 10 6 VREF (T A+25°C) ŤαV REFŤ ppm + ∆T °C A ǒ Ǔ ǒ Ǔ where ∆TA is the rated operating free-air temperature range of the device. αVREF can be positive or negative, depending on whether minimum VREF or maximum VREF, respectively, occurs at the lower temperature. ∆V KA 6. The dynamic impedance is defined as z + ka ∆I K Ť Ť When the device is operating with two external resistors (see Figure 2), the total dynamic impedance of the circuit is defined as: z Ȁ + ∆V [ z 1 ) R1 ka ka ∆I R2 Ť Ť 6 Ť Ť ǒ Ǔ POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T − JULY 1996 − REVISED JUNE 2007 TLV431A electrical characteristics at 25°C free-air temperature (unless otherwise noted) TLV431A PARAMETER TEST CONDITIONS TA = 25°C VREF VKA = VREF, IK = 10 mA Reference voltage TA = full range (see Note 3 and Figure 1) VREF(dev) A VKA = VREF, IK = 10 mA (see Note 3 and Figure 1) TYP MAX 1.228 1.24 1.252 TLV431AC 1.221 1.259 TLV431AI 1.215 1.265 TLV431AQ 1.209 TLV431AC i ti over full f ll VREF d deviation temperature range (see Note 4) MIN UNIT V 1.271 4 12 TLV431AI 6 20 TLV431AQ 11 31 mV ∆VREF ∆VKA Ratio of VREF change in cathode voltage change VKA = VREF to 6 V, IK = 10 mA (see Figure 2) −1.5 −2.7 mV/V Iref Reference terminal current IK = 10 mA, R1 = 10 kΩ, R2 = open (see Figure 2) 0.15 0.5 µA TLV431AC 0.05 0.3 Iref(dev) Iref deviation d i ti over full f ll temperature range (see Note 4) IK = 10 mA, A R1 = 10 kΩ, kΩ R2 = open (see Note 3 and Figure 2) TLV431AI 0.1 0.4 TLV431AQ 0.15 0.5 µA TLV431AC/AI 55 80 TLV431AQ 55 100 VREF = 0, VKA = 6 V (see Figure 3) 0.001 0.1 µA VKA = VREF, f ≤ 1 kHz, IK = 0.1 mA to 15 mA (see Figure 1) 0.25 0.4 Ω IK(min) Minimum cathode current for regulation VKA = VREF (see Figure 1) IK(off) Off-state cathode current |zKA| Dynamic impedance (see Note 5) A µA NOTES: 3. Full temperature ranges are − 40°C to 125°C for TLV431AQ, − 40°C to 85°C for TLV431AI, and 0°C to 70°C for TLV431AC. 4. The deviation parameters VREF(dev) and Iref(dev) are defined as the differences between the maximum and minimum values obtained over the rated temperature range. The average full-range temperature coefficient of the reference input voltage, αVREF, is defined as: V REF(dev) 10 6 VREF (T A+25°C) ŤαV REFŤ ppm + ∆T °C A ǒ Ǔ ǒ Ǔ where ∆TA is the rated operating free-air temperature range of the device. αVREF can be positive or negative, depending on whether minimum VREF or maximum VREF, respectively, occurs at the lower temperature. ∆V KA 5. The dynamic impedance is defined as z + ka ∆I K Ť Ť When the device is operating with two external resistors (see Figure 2), the total dynamic impedance of the circuit is defined as: z Ȁ + ∆V [ z 1 ) R1 ka ka ∆I R2 Ť Ť Ť Ť ǒ Ǔ POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T − JULY 1996 − REVISED JUNE 2007 TLV431B electrical characteristics at 25°C free-air temperature (unless otherwise noted) TLV431B PARAMETER TEST CONDITIONS TA = 25°C VREF VKA = VREF, IK = 10 mA Reference voltage TA = full range (see Note 3 and Figure 1) VREF(dev) A VKA = VREF, IK = 10 mA (see Note 3 and Figure 1) TYP MAX 1.234 1.24 1.246 TLV431BC 1.227 1.253 TLV431BI 1.224 1.259 TLV431BQ 1.221 TLV431BC i ti over full f ll VREF d deviation temperature range (see Note 4) MIN UNIT V 1.265 4 12 TLV431BI 6 20 TLV431BQ 11 31 −1.5 −2.7 mV/V 0.1 0.5 µA TLV431BC 0.05 0.3 TLV431BI 0.1 0.4 TLV431BQ 0.15 0.5 55 100 µA ∆VREF ∆VKA Ratio of VREF change in cathode voltage change VKA = VREF to 6 V, IK = 10 mA (see Figure 2) Iref Reference terminal current IK = 10 mA, R1 = 10 kΩ, R2 = open (see Figure 2) Iref(dev) Iref deviation d i ti over full f ll temperature range (see Note 4) IK = 10 mA, A R1 = 10 kΩ, kΩ R2 = open (see Note 3 and Figure 2) mV µA IK(min) Minimum cathode current for regulation VKA = VREF (see Figure 1) IK(off) Off-state cathode current VREF = 0, VKA = 6 V (see Figure 3) 0.001 0.1 µA |zKA| Dynamic impedance (see Note 5) VKA = VREF, f ≤ 1 kHz, IK = 0.1 mA to 15 mA (see Figure 1) 0.25 0.4 Ω NOTES: 3. Full temperature ranges are − 40°C to 125°C for TLV431BQ, − 40°C to 85°C for TLV431BI, and 0°C to 70°C for TLV431BC. 4. The deviation parameters VREF(dev) and Iref(dev) are defined as the differences between the maximum and minimum values obtained over the rated temperature range. The average full-range temperature coefficient of the reference input voltage, αVREF, is defined as: V REF(dev) 10 6 VREF (T A+25°C) ppm ŤαV REFŤ + ∆T °C A ǒ Ǔ ǒ Ǔ where ∆TA is the rated operating free-air temperature range of the device. αVREF can be positive or negative, depending on whether minimum VREF or maximum VREF, respectively, occurs at the lower temperature. ∆V KA 5. The dynamic impedance is defined as z ka + ∆I K Ť Ť When the device is operating with two external resistors (see Figure 2), the total dynamic impedance of the circuit is defined as: z Ȁ + ∆V [ z 1 ) R1 ka ka ∆I R2 Ť Ť 8 Ť Ť ǒ Ǔ POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T − JULY 1996 − REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION Input Input VO VO IK IK R1 R2 VREF Figure 1. Test Circuit for VKA = VREF, VO = VKA = VREF Input Iref VREF Figure 2. Test Circuit for VKA > VREF, VO = VKA = VREF × (1 + R1/R2) + Iref × R1 VO IK(off) Figure 3. Test Circuit for IK(off) POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 9 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T − JULY 1996 − REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION† REFERENCE VOLTAGE vs JUNCTION TEMPERATURE 1.254 IK = 10 mA V ref − Reference Voltage − V 1.252 1.250 1.248 1.246 1.244 1.242 1.240 1.238 −50 −25 0 25 50 75 100 125 150 TJ − Junction Temperature − °C Figure 4 REFERENCE INPUT CURRENT vs JUNCTION TEMPERATURE (for TLV431 and TLV431A) REFERENCE INPUT CURRENT vs JUNCTION TEMPERATURE (for TLV431B) 250 IK = 10 mA R1 = 10 kΩ R2 = Open 230 I ref − Reference Input Current − nA I ref − Reference Input Current − nA 250 200 150 100 210 IK = 10 mA R1 = 10 kΩ R2 = Open 190 170 150 130 110 90 70 50 −50 −25 0 25 50 75 100 125 TJ − Junction Temperature − °C Figure 5A † 10 50 −50 150 −25 0 25 50 75 100 125 150 TJ − Junction Temperature − °C Figure 5 Figure 5B Operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T − JULY 1996 − REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION† CATHODE CURRENT vs CATHODE VOLTAGE CATHODE CURRENT vs CATHODE VOLTAGE 15 250 VKA = VREF TA = 25°C VKA = VREF TA = 25°C 200 10 I K − Cathode Current − µ A I K − Cathode Current − mA 150 5 0 −5 100 50 0 −50 −100 −150 −10 −200 −15 −1 −0.5 0 0.5 1 VKA − Cathode Voltage − V −250 −1 1.5 −0.5 0 0.5 1 VKA − Cathode Voltage − V Figure 6 Figure 7 OFF-STATE CATHODE CURRENT vs JUNCTION TEMPERATURE (for TLV431 and TLV431A) OFF-STATE CATHODE CURRENT vs JUNCTION TEMPERATURE (for TLV431B) 3000 VKA = 5 V VREF = 0 I K(off) − Off-State Cathode Current − nA I K(off) − Off-State Cathode Current − nA 40 30 20 10 0 −50 −25 0 25 50 75 100 125 2500 VKA = 6 V VREF = 0 2000 1500 1000 500 0 −50 150 −25 Figure 8A 0 25 50 75 100 125 150 TJ − Junction Temperature − °C TJ − Junction Temperature − °C † 1.5 Figure 8 Figure 8B Operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 11 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T − JULY 1996 − REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION† RATIO OF DELTA REFERENCE VOLTAGE TO DELTA CATHODE VOLTAGE vs JUNCTION TEMPERATURE (for TLV431 and TLV431A) RATIO OF DELTA REFERENCE VOLTAGE TO DELTA CATHODE VOLTAGE vs JUNCTION TEMPERATURE (for TLV431B) 0.0 0 ∆V ref/ ∆V KA − Ratio of Delta Reference Voltage to Delta Cathode Voltage − mV/V ∆V ref/ ∆V KA − Ratio of Delta Reference Voltage to Delta Cathode Voltage − mV/V 0 −0.1 −0.2 −0.3 −0.4 −0.5 −0.6 −0.7 −0.8 −50 IK = 10 mA ∆VKA = VREF to 6 V −25 0 25 50 75 100 125 150 −0.1 IK = 10 mA ∆VKA = VREF to 6 V −0.2 −0.3 −0.4 −0.5 −0.6 −0.7 −0.8 −0.9 −1 −1.0 −50 −25 TJ − Junction Temperature − °C Figure 9A 0 25 50 75 100 125 150 TJ − Junction Temperature − °C Figure 9B Figure 9 PERCENTAGE CHANGE IN VREF vs OPERATING LIFE AT 55°C 0.025 V ref − % Percentage Change in Vref IK = 1 mA 0 % Change (avg) −0.025 % Change (3δ) −0.05 −0.075 −0.1 % Change (−3δ) −0.125 0 10 20 30 40 50 60 Operating Life at 55°C − kh‡ ‡ Extrapolated from life-test data taken at 125°C; the activation energy assumed is 0.7 eV. Figure 10 † 12 Operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T − JULY 1996 − REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY 3V Vn − Equivalent Input Noise Voltage − nV/ Hz 350 VKA = VREF IK = 1 mA TA = 25°C 1 kΩ 300 470 µF + 250 TLV431 or TLV431A or TLV431B 200 750 Ω 2200 µF + 820 Ω TLE2027 + _ TP 160 kΩ 160 Ω TEST CIRCUIT FOR EQUIVALENT INPUT NOISE VOLTAGE 150 10 100 1k 10k 100k f − Frequency − Hz Figure 11 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 13 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T − JULY 1996 − REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION EQUIVALENT INPUT NOISE VOLTAGE OVER A 10-s PERIOD Vn − Equivalent Input Noise Voltage − µ V 10 f = 0.1 Hz to 10 Hz IK = 1 mA TA = 25°C 8 6 4 2 0 −2 −4 −6 −8 −10 0 2 4 6 8 10 t − Time − s 3V 1 kΩ 470 µF + 750 Ω 0.47 µF 2200 µF + 820 Ω TLV431 or TLV431A or TLV431B TLE2027 10 kΩ + _ 10 kΩ 1 µF 160 kΩ TLE2027 + _ 2.2 µF + CRO 1 MΩ 33 kΩ 16 Ω 0.1 µF 33 kΩ TEST CIRCUIT FOR 0.1-Hz TO 10-Hz EQUIVALENT NOISE VOLTAGE Figure 12 14 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TP TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T − JULY 1996 − REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION 80 0° IK = 10 mA TA = 25°C 70 36° 60 72° 50 108° 40 144° 30 180° Phase Shift A V − Small-Signal Voltage Gain/Phase Margin − dB SMALL-SIGNAL VOLTAGE GAIN/PHASE MARGIN vs FREQUENCY Output IK 6.8 kΩ 180 Ω 10 µF 5V 4.3 kΩ 20 10 GND 0 −10 −20 100 TEST CIRCUIT FOR VOLTAGE GAIN AND PHASE MARGIN 1k 10k 100k 1M f − Frequency − Hz Figure 13 REFERENCE IMPEDANCE vs FREQUENCY 100 |z ka | − Reference Impedance − Ω IK = 0.1 mA to 15 mA TA = 25°C 100 Ω Output 10 IK 100 Ω 1 − + GND 0.1 TEST CIRCUIT FOR REFERENCE IMPEDANCE 0.01 1k 10k 100k 1M 10M f − Frequency − Hz Figure 14 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 15 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T − JULY 1996 − REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION PULSE RESPONSE 1 3.5 3 Input and Output Voltage − V R = 18 kΩ TA = 25°C Input 18 kΩ Output 2.5 Ik 2 1.5 Pulse Generator f = 100 kHz Output 50 Ω 1 GND 0.5 0 TEST CIRCUIT FOR PULSE RESPONSE 1 −0.5 0 1 2 3 4 5 6 7 8 t − Time − µs Figure 15 PULSE RESPONSE 2 3.5 3 Input and Output Voltage − V R = 1.8 kΩ TA = 25°C Input 1.8 kΩ Output 2.5 IK 2 1.5 Pulse Generator f = 100 kHz Output 1 GND 0.5 0 TEST CIRCUIT FOR PULSE RESPONSE 2 −0.5 0 1 2 3 4 5 6 7 8 t − Time − µs Figure 16 16 50 Ω POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T − JULY 1996 − REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION† STABILITY BOUNDARY CONDITION‡ (for TLV431B) STABILITY BOUNDARY CONDITION‡ (for TLV431 and TLV431A) 15 15 TA = 25°C IK = 15 mA Max VKA = VREF 12 9 Stable Stable VKA = 2 V 6 VKA = 3 V VKA = 3 V 0.1 1 TA = 25°C IK = 15 mA MAX For VKA = VREF , Stable for CL = 1 pF to 10k nF 0 0.001 10 0.01 CL − Load Capacitance − µF 1 10 150 Ω IK IK + − R1 = 10 kΩ CL Vbat R2 TEST CIRCUIT FOR VKA = VREF ‡ 0.1 CL − Load Capacitance − µF 150 Ω CL Unstable 6 3 0.01 VKA = 2 V 9 3 0 0.001 Stable Stable I K − Cathode Current − mA I K − Cathode Current − mA 12 + − Vbat TEST CIRCUIT FOR VKA = 2 V, 3 V The areas under the curves represent conditions that may cause the device to oscillate. For VKA = 2-V and 3-V curves, R2 and Vbat were adjusted to establish the initial VKA and IK conditions with CL = 0. Vbat and CL then were adjusted to determine the ranges of stability. Figure 17 † Operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 17 TLV431, TLV431A, TLV431B LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT REGULATOR SLVS139T − JULY 1996 − REVISED JUNE 2007 APPLICATION INFORMATION ~ VI 120 V − + P ~ VO 3.3 V P P Gate Drive VCC Controller VFB TLV431 or TLV431A or TLV431B Current Sense GND P P P P Figure 18. Flyback With Isolation Using TLV431, TLV431A, or TLV431B as Voltage Reference and Error Amplifier Figure 18 shows the TLV431, TLV431A, or TLV431B used in a 3.3-V isolated flyback supply. Output voltage VO can be as low as reference voltage VREF (1.24 V ± 1%). The output of the regulator, plus the forward voltage drop of the optocoupler LED (1.24 + 1.4 = 2.64 V), determine the minimum voltage that can be regulated in an isolated supply configuration. Regulated voltage as low as 2.7 Vdc is possible in the topology shown in Figure 18. 18 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 3-May-2010 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TLV431ACDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431ACDBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431ACDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431ACDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431ACDBVTE4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431ACDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431ACDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431ACDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431ACLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431ACLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431ACLPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431ACLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431AID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDBVTE4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431AIDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 Lead/Ball Finish MSL Peak Temp (3) PACKAGE OPTION ADDENDUM www.ti.com 3-May-2010 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TLV431AIDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) TLV431AILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431AILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431AILPM ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431AILPME3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431AILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431AILPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431AQPK ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR TLV431AQPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR TLV431BCDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDBVTE4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDCKR ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDCKRE4 ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDCKRG4 ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDCKT ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDCKTE4 ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCDCKTG4 ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BCLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN Addendum-Page 2 Lead/Ball Finish CU NIPDAU MSL Peak Temp (3) Level-1-260C-UNLIM N / A for Pkg Type PACKAGE OPTION ADDENDUM www.ti.com 3-May-2010 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TLV431BCLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BCLPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BCLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BCPK ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR TLV431BCPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR TLV431BIDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDBVTE4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDCKR ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDCKRE4 ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDCKRG4 ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDCKT ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDCKTE4 ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BIDCKTG4 ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BILPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BIPK ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR Addendum-Page 3 Lead/Ball Finish MSL Peak Temp (3) PACKAGE OPTION ADDENDUM www.ti.com 3-May-2010 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TLV431BIPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR TLV431BQDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDBVTE4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDCKR ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDCKRE4 ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDCKRG4 ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDCKT ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDCKTE4 ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQDCKTG4 ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431BQLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BQLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BQLPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BQLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431BQPK ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR TLV431BQPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR TLV431CDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431CDBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431CDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 4 Lead/Ball Finish MSL Peak Temp (3) PACKAGE OPTION ADDENDUM www.ti.com (1) 3-May-2010 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TLV431CDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431CDBVTE4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431CDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431CDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431CDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431CLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431CLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431CLPM ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431CLPME3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431CLPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431CLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431IDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431IDBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431IDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431IDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431IDBVTE4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431IDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV431ILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431ILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431ILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431ILPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV431QPK ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR TLV431QPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEAR The marketing status values are defined as follows: Addendum-Page 5 Lead/Ball Finish MSL Peak Temp (3) PACKAGE OPTION ADDENDUM www.ti.com 3-May-2010 ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF TLV431A, TLV431B : • Automotive: TLV431A-Q1, TLV431B-Q1 NOTE: Qualified Version Definitions: • Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects Addendum-Page 6 PACKAGE MATERIALS INFORMATION www.ti.com 15-Apr-2009 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel Diameter Width (mm) W1 (mm) TLV431ACDBVR SOT-23 DBV 5 3000 178.0 A0 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TLV431ACDBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TLV431ACDBZR SOT-23 DBZ 3 3000 180.0 9.2 3.18 3.28 1.32 4.0 8.0 Q3 TLV431AIDBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TLV431AIDBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TLV431AIDBZR SOT-23 DBZ 3 3000 180.0 9.2 3.18 3.28 1.32 4.0 8.0 Q3 TLV431AIDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLV431AQPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 TLV431BCDBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TLV431BCDBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TLV431BCDBZR SOT-23 DBZ 3 3000 180.0 9.2 3.18 3.28 1.32 4.0 8.0 Q3 TLV431BCDBZT SOT-23 DBZ 3 250 180.0 9.2 3.18 3.28 1.32 4.0 8.0 Q3 TLV431BCDCKR SC70 DCK 6 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 TLV431BCDCKT SC70 DCK 6 250 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 TLV431BCPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 TLV431BIDBVR SOT-23 DBV 5 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TLV431BIDBVT SOT-23 DBV 5 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TLV431BIDBZR SOT-23 DBZ 3 3000 180.0 9.2 3.18 3.28 1.32 4.0 8.0 Q3 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 15-Apr-2009 Device Package Package Pins Type Drawing SPQ Reel Reel Diameter Width (mm) W1 (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TLV431BIDBZT SOT-23 DBZ 3 250 180.0 9.2 3.18 3.28 1.32 4.0 8.0 Q3 TLV431BIDCKR SC70 DCK 6 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 TLV431BIDCKT SC70 DCK 6 250 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 TLV431BIPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 TLV431BQDBVR SOT-23 DBV 5 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TLV431BQDBVT SOT-23 DBV 5 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TLV431BQDBZR SOT-23 DBZ 3 3000 180.0 9.2 3.18 3.28 1.32 4.0 8.0 Q3 TLV431BQDBZT SOT-23 DBZ 3 250 180.0 9.2 3.18 3.28 1.32 4.0 8.0 Q3 TLV431BQDCKR SC70 DCK 6 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 TLV431BQDCKT SC70 DCK 6 250 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 TLV431BQPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 TLV431CDBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TLV431CDBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TLV431CDBZR SOT-23 DBZ 3 3000 180.0 9.2 3.18 3.28 1.32 4.0 8.0 Q3 TLV431IDBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TLV431IDBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TLV431IDBZR SOT-23 DBZ 3 3000 180.0 9.2 3.18 3.28 1.32 4.0 8.0 Q3 TLV431QPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 *All dimensions are nominal Pack Materials-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 15-Apr-2009 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLV431ACDBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TLV431ACDBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TLV431ACDBZR SOT-23 DBZ 3 3000 202.0 201.0 28.0 TLV431AIDBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TLV431AIDBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TLV431AIDBZR SOT-23 DBZ 3 3000 202.0 201.0 28.0 TLV431AIDR SOIC D 8 2500 340.5 338.1 20.6 TLV431AQPK SOT-89 PK 3 1000 340.0 340.0 38.0 TLV431BCDBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TLV431BCDBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TLV431BCDBZR SOT-23 DBZ 3 3000 202.0 201.0 28.0 TLV431BCDBZT SOT-23 DBZ 3 250 202.0 201.0 28.0 TLV431BCDCKR SC70 DCK 6 3000 195.0 200.0 45.0 TLV431BCDCKT SC70 DCK 6 250 195.0 200.0 45.0 TLV431BCPK SOT-89 PK 3 1000 340.0 340.0 38.0 TLV431BIDBVR SOT-23 DBV 5 3000 195.0 200.0 45.0 TLV431BIDBVT SOT-23 DBV 5 250 195.0 200.0 45.0 TLV431BIDBZR SOT-23 DBZ 3 3000 202.0 201.0 28.0 TLV431BIDBZT SOT-23 DBZ 3 250 202.0 201.0 28.0 TLV431BIDCKR SC70 DCK 6 3000 195.0 200.0 45.0 TLV431BIDCKT SC70 DCK 6 250 195.0 200.0 45.0 TLV431BIPK SOT-89 PK 3 1000 340.0 340.0 38.0 TLV431BQDBVR SOT-23 DBV 5 3000 195.0 200.0 45.0 TLV431BQDBVT SOT-23 DBV 5 250 195.0 200.0 45.0 TLV431BQDBZR SOT-23 DBZ 3 3000 202.0 201.0 28.0 TLV431BQDBZT SOT-23 DBZ 3 250 202.0 201.0 28.0 TLV431BQDCKR SC70 DCK 6 3000 195.0 200.0 45.0 TLV431BQDCKT SC70 DCK 6 250 195.0 200.0 45.0 TLV431BQPK SOT-89 PK 3 1000 340.0 340.0 38.0 TLV431CDBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TLV431CDBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TLV431CDBZR SOT-23 DBZ 3 3000 202.0 201.0 28.0 TLV431IDBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TLV431IDBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TLV431IDBZR SOT-23 DBZ 3 3000 202.0 201.0 28.0 TLV431QPK SOT-89 PK 3 1000 340.0 340.0 38.0 Pack Materials-Page 3 MECHANICAL DATA MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001 LP (O-PBCY-W3) PLASTIC CYLINDRICAL PACKAGE 0.205 (5,21) 0.175 (4,44) 0.165 (4,19) 0.125 (3,17) DIA 0.210 (5,34) 0.170 (4,32) Seating Plane 0.157 (4,00) MAX 0.050 (1,27) C 0.500 (12,70) MIN 0.104 (2,65) FORMED LEAD OPTION 0.022 (0,56) 0.016 (0,41) 0.016 (0,41) 0.014 (0,35) STRAIGHT LEAD OPTION D 0.135 (3,43) MIN 0.105 (2,67) 0.095 (2,41) 0.055 (1,40) 0.045 (1,14) 1 2 3 0.105 (2,67) 0.080 (2,03) 0.105 (2,67) 0.080 (2,03) 4040001-2 /C 10/01 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Lead dimensions are not controlled within this area D. FAlls within JEDEC TO -226 Variation AA (TO-226 replaces TO-92) E. Shipping Method: Straight lead option available in bulk pack only. Formed lead option available in tape & reel or ammo pack. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 MECHANICAL DATA MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001 LP (O-PBCY-W3) PLASTIC CYLINDRICAL PACKAGE 0.539 (13,70) 0.460 (11,70) 1.260 (32,00) 0.905 (23,00) 0.650 (16,50) 0.610 (15,50) 0.020 (0,50) MIN 0.098 (2,50) 0.384 (9,75) 0.335 (8,50) 0.748 (19,00) 0.217 (5,50) 0.433 (11,00) 0.335 (8,50) 0.748 (19,00) 0.689 (17,50) 0.114 (2,90) 0.094 (2,40) 0.114 (2,90) 0.094 (2,40) 0.169 (4,30) 0.146 (3,70) DIA 0.266 (6,75) 0.234 (5,95) 0.512 (13,00) 0.488 (12,40) TAPE & REEL 4040001-3 /C 10/01 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Tape and Reel information for the Format Lead Option package. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DLP® Products www.dlp.com Communications and Telecom www.ti.com/communications DSP dsp.ti.com Computers and Peripherals www.ti.com/computers Clocks and Timers www.ti.com/clocks Consumer Electronics www.ti.com/consumer-apps Interface interface.ti.com Energy www.ti.com/energy Logic logic.ti.com Industrial www.ti.com/industrial Power Mgmt power.ti.com Medical www.ti.com/medical Microcontrollers microcontroller.ti.com Security www.ti.com/security RFID www.ti-rfid.com Space, Avionics & Defense www.ti.com/space-avionics-defense RF/IF and ZigBee® Solutions www.ti.com/lprf Video and Imaging www.ti.com/video Wireless www.ti.com/wireless-apps Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2010, Texas Instruments Incorporated