EMC Choke Coil<Pin Type: PFN Series> Type: PFN0716 ◆ Product Description ・￠16.5mm×8.0mm. Max ・In addition to the typical versions of parameters shown here, custom parameters are available to meet your exact requirements. ◆ Feature ・Iron dust core is used to realize better DC Saturation characteristics and higher noise absorption effect. ・Less leakage magnetic flux. ・Ideally used as normal mode chokes EMI suppression in power supplies or signal lines. ・Elimination for impulse noise. ・RoHS Compliance ◆ Dimensions (mm) 8.0 MAX. 10.0±2.0 1.5 MAX. NO SOLDER DIP φ16.5 MAX. SOLDER φ0.65 MAX. ◆ Specification Inductance (μH) [MIN.] At 1kHz D.C.R.(mΩ) [MAX.] (at20℃) PFNØ716NP-NM29A 21 43 PFNØ716NP-NM39A 37 58 Part Name. Impedance [MIN.] ① ② ③ 544Ω ａt 5MHz 1245Ω ａt 5MHz 1180Ω ａt 10MHz 2070Ω ａt 7MHz 1245Ω ａt 20MHz 950Ω ａt 15MHz Rated Current (A)※1 5.4 2.9 ※1. Rated current: The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃). Please refer to the sales offices on our website for a representative near you www.sumida.com 1/1