AdvancedMC Connectors Series CN074 AdvancedMC Connector for AdvancedTCA Support 12.5Gbps transmission for telecom applications CN074 supports data transfer between AdvancedMC and AvancedTCA Carrier Board (blade) at 12.5Gbps and beyond, optimizing the performance of the AdvancedTCA system. CN074 is PICMG AMC.0 compliant. Behind the high-speed connectivity: „CMT“ and „YFLEX“ The unprecedented high-speed connectivity is achieved by combining our unique connectormounting technology, CMT and our patented flexible circuit board, YFLEX. The combination of CMT and YFLEX ideally reduces insertion loss and cross talk to the absolute minimum, ensuring data transfer rates of 12.5Gbps and beyond without signal loss. Covers full range of AdvanceMCs but also allows customization CN074 not only covers the full range of standard AdvancedMCs but also allows for design modifications e.g. special pin configuration to meet your specific needs. CN074-085-0003 (Type B) CN074-170-0005 (Type B+) CN074-170-0006 (Type AB) CN074-340-0001 (Type A+B+) CN074-340-0003 (Type A+B+ mid size) YFLEX YFLEX is Yamaichi Electronics LCP-based flexible circuit board. In the Connectors, YFLEX is used as a cable that ensures high-speed data transmission with minimal signal loss. For more information about ‘’YFLEX’’ YFLEX LCP-based flexible circuit board SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Connectors B-3 AdvancedMC Connectors for AdvancedTCA CN074 Series AdvancedMC Connector for AdvancedTCA AdvancedMC Connectors Series CN074 AdvancedMCTM Connector for ATCA (Type A+B+) Insulation Resistance: Withstanding Voltage: Differential Impedance: Line Resistance: Attenuation: Return Loss: Cross Talk Ratio: Operating Temp. Range: Mating Cycles: 100MΩ min. at 80V DC 80Vrms 100Ω ±10Ω Differential pair conductors = 375mΩ General purpose conductors =90mΩ Power conductors =90mΩ Ground conductors =60mΩ <1dB at 8GHz and <2dB at 12GHz <20dB at 5GHz and <13dB at 8GHz NE and FE <2% –55°C to +105°C 200 times Materials Case: Housing: Contact: YFLEX: Screw: Stiffener: CN074 AdvancedMC Connectors for AdvancedTCA Part Number (Details) Specifications - 340 - 0001 *Series No. of Contacts Design Number *INFO: including screws and stiffener Features PA9T (UL94V-0), black LCP (UL94V-0), black Copper Alloy, Gold plating over Nickel LCP/Copper, Gold plating over Nickel Stainless Stainless, PA9T (UL94V-0), black Connector Type: Carrier Board: Contacts: Module Slots: Extended Cutaway 340 2 Outline Connector Dimensions CN074-340-0001 (Type A+B+) 74.80 71.50 21.85 13.60 0.75 4 - ∅ 1.44 positioning pins 2- 65.00 PCB Layout CN074-340-0001 (Type A+B+) Top View from Connector 75.00 70.30 65.00 84 x 0.75 = 63.00 A1 A170 A85 A86 B85 B170 B1 B86 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Connectors B-7 AdvancedMC Connectors Series CN074 AdvancedMCTM Connector for ATCA (Type AB) Specifications Insulation Resistance: Withstanding Voltage: Differential Impedance: Line Resistance: Attenuation: Return Loss: Cross Talk Ratio: Operating Temp. Range: Mating Cycles: Part Number (Details) 100MΩ min. at 80V DC 80Vrms 100Ω ±10Ω Differential pair conductors = 375mΩ General purpose conductors =90mΩ Power conductors =90mΩ Ground conductors =60mΩ <1dB at 8GHz and <2dB at 12GHz <20dB at 5GHz and <13dB at 8GHz NE and FE <2% –55°C to +105°C 200 times CN074 - 170 - 0006 *Series No. of Contacts Design Number *INFO: including screws and stiffener Materials Features Case: Housing: Contact: YFLEX: Screw: Stiffener: Connector Type: Carrier Board: Contacts: Module Slots: PA9T (UL94V-0), black LCP (UL94V-0), black Copper Alloy, Gold plating over Nickel LCP/Copper, Gold plating over Nickel Stainless Stainless, PA9T (UL94V-0), black Basic Cutaway 170 2 Outline Connector Dimensions CN074-170-0006 (Type AB) 70.30 74.80 71.50 84 x 0.75 = 63.00 13.60 4 - ∅ 1.44 positioning pins 2- 65.00 PCB Layout CN074-170-0006 (Type AB) Top View from Connector 75.00 70.30 65.00 84 x 0.75 = 63.00 A1 B1 B-6 Connectors 21.85 0.75 A85 B85 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER AdvancedMC Connectors Series CN074 AdvancedMCTM Connector for ATCA (Type B) Specifications Part Number (Details) Insulation Resistance: Withstanding Voltage: Differential Impedance: Line Resistance: Attenuation: Return Loss: Cross Talk Ratio: Operating Temp. Range: Mating Cycles: 100MΩ min. at 80V DC 80Vrms 100Ω ±10Ω Differential pair conductors = 375mΩ General purpose conductors =90mΩ Power conductors =90mΩ Ground conductors =60mΩ <1dB at 8GHz and <2dB at 12GHz <20dB at 5GHz and <13dB at 8GHz NE and FE <2% –55°C to +105°C 200 times Materials Case: Housing: Contact: YFLEX: Screw: Stiffener: CN074 - 085 - 0003 *Series No. of Contacts Design Number *INFO: including screws and stiffener Features PA9T (UL94V-0), black LCP (UL94V-0), black Copper Alloy, Gold plating over Nickel LCP/Copper, Gold plating over Nickel Stainless Stainless, PA9T (UL94V-0), black Connector Type: Carrier Board: Contacts: Module Slots: Basic Conventional 85 1 Outline Connector Dimensions CN074-085-0003 (Type B) 70.30 74.80 71.50 84 x 0.75 = 63.00 21.85 13.60 0.75 4 - ∅ 1.44 positioning pins 65.00 PCB Layout CN074-085-0003 (Type B) Top View from Connector 75.00 70.30 65.00 84 x 0.75 = 63.00 B1 Connectors B85 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER AdvancedMC Connectors Series CN074 AdvancedMCTM Connector for ATCA (Type B+) Insulation Resistance: Withstanding Voltage: Differential Impedance: Line Resistance: Attenuation: Return Loss: Cross Talk Ratio: Operating Temp. Range: Mating Cycles: 100MΩ min. at 80V DC 80Vrms 100Ω ±10Ω Differential pair conductors = 375mΩ General purpose conductors =90mΩ Power conductors =90mΩ Ground conductors =60mΩ <1dB at 8GHz and <2dB at 12GHz <20dB at 5GHz and <13dB at 8GHz NE and FE <2% –55°C to +105°C 200 times Materials Case: Housing: Contact: YFLEX: Screw: Stiffener: CN074 AdvancedMC Connectors for AdvancedTCA Part Number (Details) Specifications - 170 - 0005 *Series No. of Contacts Design Number *INFO: including screws and stiffener Features PA9T (UL94V-0), black LCP (UL94V-0), black Copper Alloy, Gold plating over Nickel LCP/Copper, Gold plating over Nickel Stainless Stainless, PA9T (UL94V-0), black Connector Type: Carrier Board: Contacts: Module Slots: Extended Conventional 170 1 Outline Connector Dimensions CN074-170-0005 (Type B+) 70.30 74.80 71.50 84 x 0.75 = 63.00 21.85 13.60 0.75 4 - ∅ 1.44 positioning pins 65.00 PCB Layout CN074-170-0005 (Type B+) Top View from Connector 75.00 70.30 65.00 84 x 0.75 = 63.00 B1 B170 B85 B86 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Connectors B-5 AdvancedMC Connectors Series CN074 / CN080 / CN084 AdvancedCMT - Compression Mount Technology CMT no e! s i om r p m co CMT Speed CMT Flexibility CMT Reliability CMT = Compression Mount Technology AdvancedCMT is the quality trademark of Yamaichi Electronics for connectors used in Advanced TCA® and MicroTCA® CMT is a contact technology between an electro-mechanical component (e.g. connector or test adapter for semi-conductors) and a printed circuit board. The electrical contact is established through the compression of the two contact faces by screwing the component to the PCB. A stiffener is screwed from the backside to avoid stress on the PCB. Easy field repair and component replacement is possible. Compreseion Mount Contact Connector Housing Au Pad PCB Connectors Stiffener SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER AdvancedMC Connectors Series CN074 / CN080 / CN084 AdvancedCMT - Compression Mount Technology CMT Speed Small drilling hole Press fit hole Blind via - reducing stub-effects and reflexion Buried via - reducing cross-talk and insertion loss Cross-section showing PCB holesrequired for press-fit connections compared to small drilling holes or vias for CMT - providing characteristic impedance matching - enabling transmission waveform @12.5 Gbps (see diagram below) Compression Mount Press-fit CMT Flexibility The usage of blind via’s, micro via’s or drillings with very small diameter also provides - more space for signal routing on the backplane - possibilities to reduce the number of backplane layers up to 30% - cost saving due to less backplane layers Vertical Routing Channel 4 pair between MCH Tongues 3 pair in the middle of the connector 1 pair between MCH Tongues 2 in the middle of the connector CMT Reliability AdvancedCMT connectors from Yamaichi have proven their reliabilityunder vibration, temperature etc. according to all relevant specifications for both the CMT and the card edge connection area AdvancedMC Yamaichi is using wider contacts to compensate manufacturing tolerances of the PCB Case - No additional “guiding” needed Card edge contact Yamaichi contact shape has the contact point at the bending area (not at the stamping / cutting area) - No damage of the contact surface while mating - - Stable contact resistance during the lifetime - - Precisely defined contact force - Wide contact with smooth contact surface SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Connectors AdvancedTCA and MicroTCA CMT allows the usage of blind via’s, micro via’s or drillings with a very small diameter thus AdvancedMC Connectors Series CN074 / CN080 / CN084 PICMG AdvancedTCATM and MicroTCATM Yamaichi Electronics high-speed & high-frequency technology makes the CN Series by far the best choice for next-generation network equipment. AdvancedTCA and MicroTCA Are open architectures standardized by more than 100 members of PICMG for next-generation telecommunications. Yamaichi Electronics supports the industry´s latest standards with its CN074, CN080 and CN084 Series. PICMG (PCI Industrial Computers Manufactures Group) PICMG is a U.S.-based consortium where more than 600 computer, telecommunications and related manufacturers participate to develop open architectures including AdvancedTCA and MicroTCA. AdvancedMC (Advanced Mezzanine Card) AdvancedMC are the primary component of AdvancedTCA and MicroTCA that provides these systems with functional elements such as telecom connectivity, processors and mass-storage. The Hot-Swappable feature allows you to install or uninstall the cards directly from the front of AdvancedTCA and MicroTCA shelf without turning off power. AdvancedTCA (Advanced Telecom Computing Architecture) AdvancedTCA is a series of specifications developed by PICMG for carrier-grade telecom applications. With cutting-edge high-speed interconnect technology and processors introduced, the AdvancedTCA system provides core applications with high reliability, availability and serviceability. An AdvancedTCA shelf accepts 14 AdvancedTCA Carrier Boards (blades) and each board accepts up to eight AdvancedMC´s. By merely installing or uninstalling AdvancedMCs on/from the boards, you can easily manage the configuration of your AdvancedTCA system. MicroTCA (Micro Telecom Computing Architecture) MicroTCA is a series of specifications developed by PICMG to incorporate the key elements of AdvancedTCA for physically smaller edge applications that AdvancedTCA may not apply. MCH (MicroTCA Carrier Hub) Is the MicroTCA Carrier Hub for management of the MicroTCA system Carrier Board CN074 Series for AdvancedTCA AdvancedMC Module CN080 Series for µTCA Connectors SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER