YED353 Series (Test Contactor) Economical and Customised Specialities General Features í Insulation resistance, 100M W or more at 500V DC í Dielectric withstanding voltage, 500V AC for 1 minute í Test contactor for Manual-use í Spring contacts in SMT í Available pitches: 0.50mm (min.) to 1.27mm or more í Variable IC body dimensions í Variable IC contact styles í Variable probe contact styles Contact Specifications (example Only) Materials and Finish Contact Resistance: Max. Dimensions: Min. Dimensions: Operatin Position: Operating Force: Operating Temp Range: Mating Cycles 300m W 6.2mm 5.2mm 5.5mm 60g per pin –50°C to +150°C 50,000 minimum Plunger: Hardend BeCu / Gold over Nickel Spring: Stainless Steel / Gold over Nickel Economical Contact Style Dimensions 6.20 1.27 1.27 E-6 Æ0.43 1.67 Æ0.33 1.67 Clamshell Cover Failure Analysis Features Features í Various pin and pitch sizes from 0.50 to 1.27mm or more í Additional thermal and ground contact at the device centre Test & Burn-In SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE – DIMENSIONS IN MILLIMETER YED353 Series (Test Contactor) Economical and Customised Specialities Hinge Cover Type with Variable IC Outline Dimensions Features í Exchange locator í Optical access í High temperature applications í High humidity application í Short time development í Standardised mounting conditions Hinge Cover with Lowered Actuation Force for High Pin Counts Features í Construction system í Low profile í Easy mounting í High humidity application í Short time development í Standardised mounting conditions SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE – DIMENSIONS IN MILLIMETER Test & Burn-In E-7