MODEL 6130 SERIES Low Profile 7/8” Diameter Single Turn Conductive Plastic Bronze Bearing Position Sensor RoHS Compliant Precision Potentiometer MODEL STYLES 6137 1/4” Shaft, 3/8” Bushing 6138 (For heavy side load applications) 1/4” Shaft, 3/8” Bushing Special features and tolerances available on request ELECTRICAL1 Resistance Range, Ohms 1K to 100K ± 20% Standard Resistance Tolerance 2 ± 1% (2% for values greater than 20K Ohms) Independent Linearity Input Voltage, Maximum 400 Vdc, not to exceed power rating Power Rating, Watts 1.0 @ 70°C, derating to 0 @ 125°C Dielectric Strength 750 V rms Insulation Resistance, Minimum 1,000 Megohms Output Smoothness, Maximum 0.1% Actual Electrical Travel, Nominal 340° (300° with stop feature) ± 3° Electrical Continuity Travel, Nominal 350° (343° with stop feature) ± 3° End Voltage, Maximum 0.5% of input voltage Resolution Essentially Infinite 1 Specifications subject to change without notice. 2 Linearity is measured between 1% and 99% of input voltage. BI Technologies Corporation 4200 Bonita Place Fullerton, CA 92835 USA Website: www.bitechnologies.com July 25, 2006 page 1 of 3 BI technologies MODEL 6130 SERIES MECHANICAL Total Mechanical Travel 360° Continuous (343° with stop feature) Weight, Nominal .6 oz Backlash, Maximum 1° Static Stop Strength, Maximum 40 in.-oz. Panel Nut Tightening Torque, Maximum 15 in. lb. Start/Run Torque, Maximum 0.5 in. oz. Construction zinc die cast housing, stainless steel shaft, bronze bearing Hazardous Materials Pb free, RoHS compliant ENVIRONMENTAL (MIL(MIL-R-39023) Operating Temperature Range -40°C to +125°C 15% ∆R max. Temperature Cycling (Static) 5 cycles, -40°C to +125°C Shock, 6 ms Sawtooth 100G’s 0.1 ms discontinuity max. 5% ∆R max., 0.1 ms discontinuity max. Vibration, 10G’s, 100 to 500 Hz 25% ∆R max. Moisture Resistance, Five 24 hour cycles Rotational Life (6137) 5 million shaft rev. Rotational Life (6138) 10 million shaft rev. ORDERING INFORMATION3 6137 R10K L1.0 L1.0 XX Model Series Optional Special Feature Code Resistance Value Linearity All units are Pb free and RoHS compliant SPECIAL FEATURE CODES CODES Center Tap CT Stop ST Flatted Shaft (Slotted Shaft is Standard) FS STANDARD RESISTANCE VALUES, OHMS 1K 3 2K 5K 10K 20K 50K 100K Contact our customer service for custom designs and features. BI Technologies Corporation 4200 Bonita Place Fullerton, CA 92835 USA Website: www.bitechnologies.com July 25, 2006 page 2 of 3 BI technologies MODEL 6130 SERIES OUTLINE DRAWING CIRCUIT DIAGRAM BI Technologies Corporation 4200 Bonita Place Fullerton, CA 92835 USA Website: www.bitechnologies.com July 25, 2006 page 3 of 3 BI technologies