EH26 Series EH26 • RoHS Compliant (Pb-Free) • Ceramic SMD package • 3.3V supply voltage • LVHCMOS output • Stability to 20ppm • Available on tape and reel H 1.6 L 7.0 W 5.0 OSCILLATOR NOTES ____________________________________________________________________________________________________________ ____________________________________________________________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range 1.000MHz to 155.520MHz Operating Temperature Range 0°C to 70°C or -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VDD) 3.3VDC ±0.3VDC Input Current 35mA Maximum (Unloaded) Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25°C, ±100ppm, ±50ppm, ±25ppm, or Frequency Stability over the Operating Temperature Range, ±20ppm Maximum Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) 2.7VDC Minimum IOH =-8mA 0.5VDC Maximum IOL =+8mA ≤70.000MHz 20% to 80% of Waveform w/HCMOS Load 6 nSeconds Maximum >70.000MHz 20% to 80% of Waveform w/HCMOS Load 4 nSeconds Maximum ≤70.000MHz 30pF HCMOS Load Maximum >70.000MHz 15pF HCMOS Load Maximum Duty Cycle (at VDD=3.3VDC) at 50% of Waveform 50 ±10(%) (Standard) or Tri-State Input Voltage VIH :No Connection or ≥2.2VDC Enables Output VIL :≤0.8VDC Disables Output: High Impedance Rise Time / Fall Time Load Drive Capability 50 ±5(%) (Optional) Aging (at 25°C) ±5ppm / year Maximum Start Up Time 10mSeconds Maximum Period Jitter: Absolute ±250pSec Maximum, ±100pSec Typical Period Jitter: One Sigma ±50pSec Maximum, ±40pSec Typical MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EH26 CERAMIC 3.3V OS48 02/04 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EH26 00 ET T TS - 24.000M TR FREQUENCY TOLERANCE / STABILITY 00=±100ppm Maximum (Standard), 45=±50ppm Maximum, 25=±25ppm Maximum, 20=±20ppm Maximum AVAILABLE OPTIONS Blank=Bulk (Standard) TR=Tape and Reel OPERATING TEMP. RANGE Blank =0ºC to 70ºC or ET=-40°C to 85°C FREQUENCY OUTPUT CONTROL FUNCTION TS=Tri-State DUTY CYCLE Blank=50 ±10(%) (Standard) T=50 ±5(%) MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1: Tri-State Pin 2: Case Ground TAPE AND REEL DIMENSIONS Pin 3: Output Pin 4: Supply Voltage Tolerances= +0.1 ALL DIMENSIONS IN MILLIMETERS A B C D E 16+.3-.1 7.5±.1 6.75±.1 4 ±.1 2±.1 REEL F G H J K L 8±.1 B0* 1.5 +.1-0 A0* .3 ±.05 K0* F M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN QTY/REEL 1,000 REEL R S T U V 2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 *Compliant to EIA 481A MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Specification Line 1: ECLIPTEK Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: P XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Configuration Designator MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EH26 CERAMIC 3.3V OS48 02/04 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. Ecliptek MEMS Oscillators - Lower Cost, Quicker Delivery Alternative! The EMO™ family of oscillators offers exceptional performance, shorter delivery and significant cost advantages by utilizing a revolutionary new MEMS resonator technology. This important innovation enables Ecliptek to offer the ultimate in flexibility with delivery of 2 days for samples and 5 to 10 days for quantities up to 10,000 pieces on tape and reel. Package Dimensions (all dimensions in millimeters) Supply Voltage (VDC) 5x7 3.2 x 5 2.5 x 3.2 2 x 2.5 1.8 EMK11 EMK21 EMK31 EMK41 2.5 EMK12 EMK22 EMK32 EMK42 3.3 EMK13 EMK23 EMK33 EMK43 Would you like to request EMO™ samples or a quotation now? Click Here Want to learn more about the Ecliptek EMO™ family of MEMS oscillators? Click Here Product Features: • • • • • • • • • Improved frequency stability through the use of a MEMS resonator 1.8VDC, 2.5VDC, or 3.3VDC supply voltages Frequency range of 1MHz to 125MHz, HCMOS output Frequency stability to ±50ppm, -40°C to +85°C operation Tri-state or power down functions RoHS compliant High temperature +260°C reflow capability EIA compliant tape and reel packaging Four SMD package sizes If you have any questions or would like additional information regarding the Ecliptek EMO™ family of oscillators, please contact our Sales Department.