EP13E7 Series • RoHS Compliant (Pb-Free) • EPO™ Programmable Oscillators • Ceramic Surface Mount Package • LVHCMOS Output • 3.3V Supply Voltage • Stability to ±25ppm • Available on Tape & Reel • Tri-State and Power Down Funtions Available EP13E7 H L W 1.05 3.2 2.5 OSCILLATOR ELECTRICAL SPECIFICATIONS Nominal Frequency Operating Temperature Range Storage Temperature Range Supply Voltage (VDD) Input Current Frequency Tolerance / Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Pad 1 Connection Pad 1 Input Voltage Standby Current Disable Current Absolute Clock Jitter Aging at 25° Start Up Time 3.300MHz, 3.6864MHz, 5.000MHz, 6.000MHz, 6.144MHz, 7.000MHz, 8.000MHz, 9.000MHz, 10.000MHz, 12.000MHz, 14.7456MHz, 16.000MHz , 20.000MHz, 24.000MHz, 25.000MHz, 26.000MHz, 27.000MHz, 30.000MHz, 32.000MHz, 33.000MHz, 33.330MHz, 33.333MHz, 37.500MHz, 40.000MHz, 48.000MHz, 50.000MHz, 52.000MHz, 54.000MHz, 55.000MHz, 66.000MHz, 70.000MHz, 75.000MHz, 80.000MHz, 83.000MHz, 88.000MHz, 96.000MHz, and 100.000MHz -20°C to 70°C or -40°C to 85°C -55°C to 125°C 3.3VDC ±5% 12mA Maximum 3.300MHz to 25.000MHz 17mA Maximum 25.001MHz to 75.000MHz 22mA Maximum 75.001MHz to 90.000MHz 25mA Maximum 90.001MHz to 100.000MHz Inclusive of All Conditions: Calibration Tolerance at 25°C , ±25ppm, 50ppm or ±100ppm Maximum Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, 1st Year Aging at 25°C, 260°C Reflow, Shock, and Vibration 90% of VDD Minimum IOH = -8mA IOL = +8mA 10% of VDD Maximum 3.300MHz to 50.000MHz, 20% to 80% of waveform 6nSeconds Maximum 50.001MHz to 75.000MHz, 20% to 80% of waveform 4nSeconds Maximum 75.001MHz to 100.000MHz, 20% to 80% of waveform 2nSeconds Maximum at 50% of waveform 50 ±5(%) 3.300MHz to 50.000MHz 30pF HCMOS Load Maximum 50.001MHz to 100.000MHz 15pF HCMOS Load Maximum Tri-State or Power Down VIH of 90% of VDD Minimum Enables Output No Connection Enables Output VIL of 10% of VDD Maximum Disables Output Disabled Output (Logic Low) 30µA Maximum Disabled Output (High Impedance) 8mA Maximum 3.300MHz to 24.999999MHz 350pSec Maximum 25.000MHz to 100.000MHz 200pSec Maximum ±5ppm/Year Maximum 10mSec Maximum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EP13E7 CERAMIC 3.3V OS5N 06/08 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EP13E7 H 2 H - 50.000M TR FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE C=±100ppm Maximum over -20°C to +70°C D=±50ppm Maximum over -20°C to +70°C E=±25ppm Maximum over -20°C to +70°C G=±100ppm Maximum over -40°C to +85°C H=±50ppm Maximum over -40°C to +85°C AVAILABLE OPTIONS Blank=Bulk TR=Tape and Reel (Standard) FREQUENCY LOGIC CONTROL/ADDITIONAL OUTPUT H=Tri-State J=Power Down DUTY CYCLE 2=50% ±5% MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS 1.05 ±0.15 0.75 ±0.10 (X4) MARKING ORIENTATION 2.50 ±0.15 3.20 ±0.15 3 2 1.20 ±0.10 1.00 ±0.10 1 4 1.00 ±0.10 Pin 1: Tri-State or Power Down Pin 3: Output Pin 4: Supply Voltage Pin 2: Case Ground TAPE AND REEL DIMENSIONS Tolerances= +0.1 ALL DIMENSIONS IN MILLIMETERS PLASTIC A B 12.0 ±0.3 C D 5.5 ±0.05 4.75 ±0.1 E F M N 1.5 MIN 50 MIN REEL 4.0 ±0.1 2.00 ±0.05 O P 20.2 MIN 13+.5/-.2 F G H J K L R S T U V 4.0 ±0.1 A0* 1.5 +.1/-0 B0* 0.6 MAX K0* 2.5 MIN 10 MIN 18.4 MAX 332 MAX 12.4 +2/-0 Q 40 MIN QTY/REEL 1,000 *Compliant to EIA 481C ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Specification ESD Susceptibility Fine Leak Test Gross Leak Test Mechanical Shock Moisture Resistance Moisture Sensitivity Resistance to Soldering Heat Resistance to Solvents Solderability Temperature Cycling Thermal Shock Vibration MIL-STD-883, Method 3015, Class 1, HBM: 1500Vdc MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 1004 J-STD-020, MSL 1 MIL-STD-202, Method 210, Condition K MIL-STD-202, Method 215 MIL-STD-883, Method 2003 MIL-STD-883, Method 1010, Condition B MIL-STD-883, Method 1011, Condition B MIL-STD-883, Method 2007, Condition A MEMS First™ is a registered trademark of SiTime Corporation. MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EP13E7 CERAMIC 3.3V OS5N 06/08 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.