MUR1620CT ULTRAFAST RECTIFIERS PRV : 200 Volts Io : 8.0 Ampere TO-220AB 0.154(3.91)DIA. 0.148(3.74) FEATURES : 0.415(10.54)MAX. 0.055(1.39) 0.045(1.14) 0.113(2.87) 0.103(2.62) * High current capability 0.145(3.68) 0.135(3.43) * High surge current capability * High reliability 0.635(16.13) 0.625(15.87) * Low reverse current 0.350(8.89) 0.330(8.39) 0.185(4.70) 0.175(4.44) 0.603(15.32) 0.573(14.55) 1 2 3 * Low forward voltage drop 0.160(4.06) 0.140(3.56) PIN 1 * Pb / RoHS Free 0.560(14.22) 0.530(13.46) PIN 2 CASE MECHANICAL DATA : PIN 3 * Case : Epoxy, Molded * Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds * Weight : 2.1 grams (Approximately) 0.205(520) 0.195(4.95) 0.037(0.94) 0.027(0.68) 0.022(0.56) 0.014(0.36) 0.105(2.67) 0.095(2.41) Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. RATING SYMBOL VALUE UNIT Maximum Repetitive Peak Reverse Voltage VRRM 200 V Maximum Working Reverse Voltage VRWM 200 V VDC 200 V Maximum DC Blocking Voltage Maximum Average Forward Current IF(AV) Total Device,(Rated VR), Tc = 150°C 8.0 (Per Leg ) 16 (Total Device) A Maximum Peak Rectified Forward Current (Rated VR, Square Wave, 20 kHz) Tc = 150°C IFRM 16 A Maximum Non-repetitive Peak Forward Surge Current (Halfwave, single phase, 60 Hz) Per Leg IFSM 100 A VF IR 0.975(1) 5 (Tc = 25°C) IR(H) 250 (Tc = 150°C) µA µA Trr 25 ns Maximum Forward Voltage at IF = 8 A, Tc = 25°C Maximum Instantaneous Reverse Current ( Rated dc Voltage) (1) Maximum Reverse Recovery Time (IF = 0.5A, IR = 1A ; Irr = 0.25 A) V RθJC 3.0 °C/W Junction Temperature Range TJ - 65 to + 175 °C Storage Temperature Range TSTG - 65 to + 175 °C Maximum Thermal Resistance, Junction to Case Note : (1) Pulse Test : Pulse Width = 300 µs, Duty Cycle ≤ 2.0% Page 1 of 2 Rev. 02 : March 31, 2005 RATING AND CHARACTERISTIC CURVES ( MUR1620CT ) FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50 Ω Trr 10 Ω + 0.5 D.U.T. + 0 PULSE GENERATOR ( NOTE 2 ) 50 Vdc (approx) 1Ω - 0.25 OSCILLOSCOPE ( NOTE 1 ) - 1.0 A SET TIME BASE FOR 15/25 ns/cm NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF. 1 2. Rise time = 10 ns max., Source Impedance = 50 ohms. 3. All Resistors = Non-inductive Types. FIG. 2 - CURRENT DERATING CASE, PER LEG FIG. 3 - POWER DISSPATION, PER LEG AVERAGE POWER DISSIPATION (WATTS) AVERAGE FORWARD OUTPUT CURRENT, AMPERES 12 Rated VR Applied 8 dc 6 Square Wave 4 2 0 140 145 150 155 160 165 170 175 CASE TEMPERATURE, ( °C) FIG. 4 - TYPICAL FORWARD VOLTAGE, PER LEG 10 TJ = 175 °C 8 6 Square Wave dc 4 2 0 0 1 2 3 4 5 6 7 8 9 10 AVERAGE FORWARD CURRENT (AMPS) FIG. 5 - TYPICAL REVERSE CURRENT, PER LEG REVERSE CURRENT, MICROAMPERES FORWARD CURRENT, AMPERES 100 10 1.0 TJ = 25 °C 0.1 TJ = 175 °C 10 TJ = 100 °C 1 0.1 TJ = 25 °C 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 FORWARD VOLTAGE, VOLTS Page 2 of 2 100 1.6 0 20 40 60 80 100 120 140 REVERSE VOLTAGE, VOLTS Rev. 02 : March 31, 2005