Axial-Lead Capacitors B43697 Standard – 105 °C B43697 Applications ■ Electronic ballasts Features ■ ■ ■ ■ Long useful life High reliability Small dimensions Extensive field experience in standard electronic ballast applications Construction ■ ■ ■ ■ Charge-discharge proof, polar Aluminum case with insulating sleeve Negative pole connected to case Axial leads, welded to ensure perfect electrical contact Taping and packing ■ Bulk ■ Pallet package ■ Capacitors with d × l ≤ 16 × 30 mm are also available taped on reel. For details on taping and packing, refer to page 342. 324 10/02 B43697 Standard – 105 °C Specifications and characteristics in brief Rated voltage UR 450 VDC Surge voltage US Rated capacitance CR 495 VDC Capacitance tolerance – 10/+ 30 % Leakage current IL 10 … 47 µF Q (5 min, 20 °C) C R U R 0,7 I L ≤ 0,3 µA ⋅ æè ------- ⋅ ------- öø + 4 µA µF V Self-inductance ESL 1) Diameter d 12 mm Length l Approx. ESL (nH) 25 mm — 30 mm 21 39 mm — Useful life 105 °C; UR; I~R 85 °C; UR; I~max 85 °C; UR; I~R 40 °C; UR;1,85 · I~R 40 °C; UR; 2,3 · I~R 450 VDC > 4 000 h > 9 000 h > 20 000 h > 200 000 h — > 11 500 h > 17 500 h > 58 000 h — > 200 000 h 420 VDC Voltage endurance test 3 000 h 5 000 h 14 mm 16 mm 18 mm 22 26 — 24 29 34 — 33 38 Requirements: ≤ ± 30 % of initial value ≤ 3 times initial spec. limit ≤ initial specified limit ∆C/C ESR IL Failure percentage: ≤ 1 % Failure rate: ≤ 20 fit (≤ 20 · 10 –9/h) (for definiton “fit”, refer to chapter “Quality”, page 62) Post test requirements: ∆C/C ESR IL 105 °C; UR ≤ ± 10 % of initial value ≤ 1,3 % times initial spec. limit ≤ initial specified limit Vibration resistance To IEC 60068-2-6, test Fc: displacement amplitude 0,75 mm, frequency range 10 Hz to 55 Hz, acceleration max. 10 g, duration 3 × 2 h IEC climatic category To IEC 60068-1: 40/105/56 (– 40 °C/+ 105 °C/56 days damp heat test) Detail specification Similar to CECC 30301-801 Sectional specification IEC 60384-4 1) If optimum circuit design is used, the values are lower by 30 %. 325 10/02 B43697 Standard – 105 °C Dimensional drawings 40 _ 5 40 _ 5 max _ 0,02 W +0,04 d max max +1,5 max +4 1,3+0,1 KAL0680-9 Dimensions, weights and packing units d×l mm 12 × 30 14 × 30 16 × 30 18 × 30 18 × 39 dmax × lmax mm 12,5 × 30,5 14,5 × 30,5 16,5 × 30,5 18,5 × 30,5 18,5 × 40 Wire W Approx. weight Packing units (pieces) mm 0,8 g 5,1 Bulk 600 Reel 450 Pallet 288 0,8 6,8 400 350 200 0,8 1,0 8,9 11,1 350 300 250 — 180 160 1,0 14,7 250 — 160 326 10/02 B43697 Standard – 105 °C Case dimensions and ordering codes UR CR VDC 450 µF 10 Case dim. d×l mm 12 × 30 14 × 30 16 × 30 18 × 30 18 × 39 15 22 33 47 Ordering code Bulk B43697A5106Q000 Pallet package B43697A5106Q007 Reel B43697A5106Q009 B43697A5156Q000 B43697A5226Q000 B43697A5156Q007 B43697A5226Q007 B43697A5156Q009 B43697A5226Q009 B43697A5336Q000 B43697A5476Q000 B43697A5336Q007 B43697A5476Q007 Technical data CR 100 Hz 20 °C µF ESRtyp 100 Hz 20 °C Ω 450 VDC 10 7,5 ESRmax 100 Hz 20 °C Ω ESRmax 100 Hz −25 °C Ω ESRmax 10 kHz 20 °C Ω Zmax 100 kHz 20 °C Ω I~max 10 kHz 40 °C A I~max 10 kHz 85 °C A I~R 10 kHz 105 °C A 11,0 300 4,4 4,3 1,20 0,95 0,50 15 22 4,8 3,2 7,6 5,2 170 120 3,0 2,0 2,9 1,9 1,55 2,05 1,20 1,60 0,65 0,85 33 47 2,1 1,5 3,5 2,6 95 70 1,4 1,0 1,3 0,9 2,45 3,40 1,90 2,65 1,00 1,40 327 10/02 B43697 Standard – 105 °C Useful life depending on ambient temperature TA under ripple current operating conditions at UR 1) KAL0550-G 3,0 Ι~ Ι ~R B43697 2,5 2,0 1,5 0 40 50 60 70 80 4 000 h 10 000 h 20 000 h 50 000 h 0,5 100 000 h 250 000 h 1,0 90 100 110 ˚C 120 TA Useful life depending on ambient temperature TA under ripple current operating conditions at Uop 1) Uop = 420 V KAL0551-P 3,0 Ι~ Ι ~R B43697 2,5 2,0 1,5 0 40 50 60 70 80 90 11 000 h 25 000 h 50 000 h 0,5 100 000 h 250 000 h 1,0 100 110 ˚C 120 TA 1) Refer to page 40 for an explanation on how to interpret the useful life graphs. 328 10/02 B43697 Standard – 105 °C Frequency characteristics of ESR at different temperatures Typical behavior Frequency factor of permissible ripple current I~ versus frequency f KAL0647-3 1,2 Ι ~f B43697 ESR f ESR 10 kHz Ι ~10 kHz KAL0643-5 25 B43697 20 85 ˚C 0,9 0,8 15 0,7 0,6 0,5 60 ˚C 10 0,4 0,3 5 0,2 20 ˚C 0,1 _ 25 ˚C 0 2 10 5 10 3 0 1 10 Hz 10 4 f Equivalent series resistance ESR versus frequency f at different temperatures Typical behavior for 10 µF/450 V Ω Hz 10 4 f KAL0641-N 10 3 B43697 ESR 5 10 3 Impedance Z versus frequency f at different temperatures Typical behavior for 10 µF/450 V KAL0642-W 10 3 5 10 2 B43697 Ω Z _ 25 ˚C 10 2 10 2 5 5 10 1 10 1 _ 25 ˚C 20 ˚C 5 20 ˚C 5 10 0 60 ˚C 10 0 60 ˚C 5 5 10 85 ˚C _1 10 1 5 10 2 5 10 3 5 10 4 Hz 10 5 f 10 _1 329 10/02 10 1 5 10 2 5 10 3 5 10 4 Hz 10 5 f Herausgegeben von EPCOS AG Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND ++49 89 636 09, FAX (0 89) 636-2 26 89 ( EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen. Published by EPCOS AG Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY ++49 89 636 09, FAX (0 89) 636-2 26 89 ( EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.