SAW Components Data Sheet B5035 SAW Components B5035 Low-Loss Filter 208,0 MHz Data Sheet Features ● ● ● ● ● Ceramic package QCC10B IF low-loss filter for W-CDMA base station Usable bandwidth 3,84 MHz Balanced or unbalanced operation possible Temperature stable Ceramic SMD package Terminals ● Gold plated Dimensions in mm, appr. weight 0,23 g Pin configuration 10, 9 5, 4 1, 3, 6, 8 2, 7 Input Output Case ground To be grounded Type Ordering code B5035 B39211-B5035-Z710 Marking and Package according to C61157-A7-A49 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range Storage temperature range DC voltage Source power T Tstg VDC Ps -40 / +85 -40 / +85 0 0 2 ˚C ˚C V dBm Sep 23, 2005 Packing according to F61074-V8172-Z000 SAW Components B5035 Low-Loss Filter 208,0 MHz Data Sheet Characteristics T = +5 ... +75 ˚C ZS = 200 Ω balanced and matching network ZL = 200 Ω balanced and matching network Operating temperature range: Terminating source impedance: Terminating load impedance: min. typ. max. Nominal frequency fN — 208,0 — MHz Minimum insertion attenuation αmin — 11 13 dB — MHz Passband width αrel ≤ 1 dB B1dB — 4,2 Amplitude ripple (p-p) fN ± 1,92 MHz ∆α — 0,6 Phase ripple (p-p) fN ± 1,92 MHz ∆ϕ — 5 Phase ripple (rms) fN ± 1,92 MHz ∆ϕ — 1,1 1,5 ˚ EVM — 2,6 6,0 % 1,134 1,139 µs Error vector magnitude Absolute group delay (mean within fN±1,92 MHz) τmean Relative attenuation (relative to αmin) fN ± 2,515 MHz ... fN ± 2,6 MHz fN ± 2,6 MHz ... fN ± 2,8 MHz fN ± 2,8 MHz ... fN ± 3,3 MHz fN ± 3,3 MHz ... fN ± 20 MHz fN ± 20 MHz ... fN ± 28 MHz fN ± 28 MHz ... fN ± 60 MHz αrel Adjacent channel selectivity 5,0 MHz offset of carrier ACS Input IP3 Temperature coefficient of frequency 3) Turnover temperature 1,129 1,0 — dB ˚ 17 25 30 40 1) 45 55 2) 20 30 35 45 50 60 — — — — — — dB dB dB dB dB dB 45 49 — dB 40 — — dBm — ppm/K2 — ˚C TCf — T0 — – 0,036 20 1) Except for two narrow-band responses between 219 and 222 MHz which may reach 2 dB above 2) Except for two narrow-band responses between 236 and 240 MHz which may reach 2 dB above 3) Temperature dependance of fc: fc(TA) = fc(T0)(1 + TCf(TA – T0)2) 3 Sep 23, 2005 SAW Components B5035 Low-Loss Filter 208,0 MHz Data Sheet Characteristics T = -40 ... +85 ˚C ZS = 200 Ω balanced and matching network ZL = 200 Ω balanced and matching network Operating temperature range: Terminating source impedance: Terminating load impedance: min. typ. max. Nominal frequency fN — 208,0 — MHz Minimum insertion attenuation αmin — 11 13,2 dB — MHz Passband width αrel ≤ 1 dB B1dB — 4,2 Amplitude ripple (p-p) fN ± 1,92 MHz ∆α — 0,6 Phase ripple (p-p) fN ± 1,92 MHz ∆ϕ — 5 Phase ripple (rms) fN ± 1,92 MHz ∆ϕ — 1,1 1,5 ˚ EVM — 2,6 6,0 % 1,134 1,139 µs Error vector magnitude Absolute group delay (mean within fN±1,92 MHz) τmean Relative attenuation (relative to αmin) fN ± 2,515 MHz ... fN ± 2,6 MHz fN ± 2,6 MHz ... fN ± 2,8 MHz fN ± 2,8 MHz ... fN ± 3,3 MHz fN ± 3,3 MHz ... fN ± 20 MHz fN ± 20 MHz ... fN ± 28 MHz fN ± 28 MHz ... fN ± 60 MHz αrel Adjacent channel selectivity 5,0 MHz offset of carrier ACS Input IP3 Temperature coefficient of frequency 3) Turnover temperature 1,129 1,2 — dB ˚ 17 25 30 40 1) 45 55 2) 20 30 35 45 50 60 — — — — — — dB dB dB dB dB dB 45 49 — dB 40 — — dBm — ppm/K2 — ˚C TCf — T0 — – 0,036 20 1) Except for two narrow-band responses between 219 and 222 MHz which may reach 2 dB above 2) Except for two narrow-band responses between 236 and 240 MHz which may reach 2 dB above 3) Temperature dependance of fc: fc(TA) = fc(T0)(1 + TCf(TA – T0)2) 4 Sep 23, 2005 SAW Components B5035 Low-Loss Filter 208,0 MHz Data Sheet Matching network to 200 Ω Transformers are only required for measurement in a 50 Ω environment Ls4 Ls1 Lp1 1:4 Lp3 Lp2 Ls4 4:1 Ls1 Ls1 = 100 nH Lp3 = 150 nH Lp2 = 100 nH Ls4 = 150 nH Lp1 = 560 nH (for trimming) Element values depend upon board layout. 5 Sep 23, 2005 SAW Components B5035 Low-Loss Filter 208,0 MHz Data Sheet Transfer function Transfer function (pass band) 6 Sep 23, 2005 SAW Components B5035 Low-Loss Filter 208,0 MHz Data Sheet Published by EPCOS AG Surface Acoustic Wave Components Division, SAW COM P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2005. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 7 Sep 23, 2005