SAW Components Data Sheet B4847 SAW Components B4847 360,00 MHz Low-Loss Filter for Mobile Communication Data Sheet SMD ceramic package QCC8C Features ● ● ● ● ● Low-loss IF filter for mobile telephone Channel selection in GSM, PCN systems Ceramic SMD package Very small size High close in selectivity Terminals ● Gold-plated Ni Dimensions in mm, approx. weight 0,10 g Pin configuration 1 2 5 6 7 4,8 3 Input or input ground Input or balanced input Output or output ground Output or balanced output External coil Case ground To be grounded Type Ordering code B4847 B39361-B4847-U310 Marking and Package according to C61157-A7-A56 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range Storage temperature range DC voltage Source power T Tstg VDC Ps – 30 / +85 – 35 / +85 3 10 2 ˚C ˚C V dBm Jun 13, 2002 Packing according to F61074-V8070-Z000 SAW Components B4847 360,00 MHz Low-Loss Filter for Mobile Communication Data Sheet Characteristics T = -20˚C to +75˚C ZS = 340 Ω || -1,9 pF ZL = 340 Ω || -1,9 pF Ambient temperature: Terminating source impedance: Terminating load impedance: Nominal frequency (center frequency between 3 dB points) fN Minimum insertion attenuation (including loss in matching elements) αmin Amplitude ripple (p-p) fN -67,7kHz .. fN+67,7 kHz fN -80,0kHz .. fN+80,0 kHz ∆α min. typ. max. — 360,00 — MHz — 4,3 5,0 dB — — 0,6 0,9 2,0 3,0 dB dB — kHz 0,5 1,8 µs 32 48 48 54 62 — — — — — dB dB dB dB dB — Ω || pF — 340 || 1,9 340 || 1,9 — Ω || pF — ppm/K2 — ˚C Passband width αrel ≤ 3,0 dB B3,0dB Group delay ripple (p-p) fN -67,7 kHz .. fN+67,7 kHz ∆τ Relative attenuation (relative to αmin) fN ± 400 kHz ... fN ± 600 kHz fN ± 600 kHz ... fN ± 800 kHz fN ± 800 kHz ... fN ± 1,6 MHz fN ± 1,6 MHz ... fN ± 5,0 MHz fN ± 5,0 MHz ... fN ± 30,0 MHz αrel — — 24 38 42 * 52 55 Impedance within the pass band Input: ZIN = RIN || CIN Output: ZOUT = ROUT || COUT — 315 Temperature coefficient of frequency 1) TCf — - 0,036 Turnover temperature T0 — 28 1) Temperature *) dependence of fc: fc(T) = fc(T0)(1 + TCf(T – T0)2) In the frequency range from 362,5 MHz to 364,0 MHz there exists one spurious response. The minimum attenuation αrel of this spurious response is more than 48 dB. 3 Jun 13, 2002 SAW Components B4847 360,00 MHz Low-Loss Filter for Mobile Communication Data Sheet Characteristics T = -30˚C to +85˚C ZS = 340 Ω || -1,9 pF ZL = 340 Ω || -1,9 pF Ambient temperature: Terminating source impedance: Terminating load impedance: Nominal frequency (center frequency between 3 dB points) fN Minimum insertion attenuation (including loss in matching elements) αmin Amplitude ripple (p-p) fN -67,7kHz .. fN+67,7 kHz fN -80,0kHz .. fN+80,0 kHz ∆α min. typ. max. — 360,00 — MHz — 4,3 5,0 dB — — 0,6 0,9 3,0 4,5 dB dB — kHz 0,5 1,8 µs 32 48 48 54 62 — — — — — dB dB dB dB dB — Ω || pF — 340 || 1,9 340 || 1,9 — Ω || pF — ppm/K2 — ˚C Passband width αrel ≤ 3,0 dB B3,0dB Group delay ripple (p-p) fN -67,7 kHz .. fN+67,7 kHz ∆τ Relative attenuation (relative to αmin) fN ± 400 kHz ... fN ± 600 kHz fN ± 600 kHz ... fN ± 800 kHz fN ± 800 kHz ... fN ± 1,6 MHz fN ± 1,6 MHz ... fN ± 5,0 MHz fN ± 5,0 MHz ... fN ± 30,0 MHz αrel — — 24 38 42 * 52 55 Impedance within the pass band Input: ZIN = RIN || CIN Output: ZOUT = ROUT || COUT — 315 Temperature coefficient of frequency 1) TCf — - 0,036 Turnover temperature T0 — 28 1) Temperature *) dependence of fc: fc(T) = fc(T0)(1 + TCf(T – T0)2) In the frequency range from 362,5 MHz to 364,0 MHz there exists one spurious response. The minimum attenuation αrel of this spurious response is more than 48 dB. 4 Jun 13, 2002 SAW Components B4847 360,00 MHz Low-Loss Filter for Mobile Communication Data Sheet Test matching network to 50 Ω (element values depend on PCB layout): Ls1 = Cp3 = Cp5 = Ls7 = Lk 5 Jun 13, 2002 Ls2 = 18nH Cp4 = 1,2pF Cp6 = 1,2pF Ls8 = 18nH = 68 nH SAW Components B4847 360,00 MHz Low-Loss Filter for Mobile Communication Data Sheet Transfer function: Transfer function (pass band): 6 Jun 13, 2002 SAW Components B4847 360,00 MHz Low-Loss Filter for Mobile Communication Data Sheet Published by EPCOS AG Surface Acoustic Wave Components Division, SAW MC WT P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 7 Jun 13, 2002