PM/P/P Cores Halves/EP/TT/PR Cores Series/Type: P 4.6 x 4.1 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product B65496B20030000 B65496B20020000 B63399A10070000 B65496B20030000 Date of Withdrawal 2003-08-08 2003-08-08 2003-08-08 Deadline Last Orders Last Shipments 2005-03-31 2004-02-29 2005-09-30 2004-08-31 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. P 4,6 × 4,1 Core B65495 4,65 _ 0,19 3,7+0,15 1,1+0,1 Miniature pot cores for adjustable miniature inductors ■ One of the two cores is equipped with an internal thread for the adjusting screw ■ The unit can be fixed to the terminal carrier by glue ø2,2 _ 0,1 ■ Space requirements of the inductor 5 × 5,1 mm (without terminals) ■ Pot cores are supplied in sets 4,1_ 0,1 2,7+0,2 Magnetic characteristics (per set) Σl/A le Ae Ve 0,85+0,1 ø1,4+0,05 = 2,6 mm–1 = 7,6 mm = 2,8 mm2 = 21,3 mm3 M1,2 FPK0337-9 Approx. weight 0,17 g/set Ungapped Material AL value µe nH Ordering code 1) -K with thread -B with center hole M33 200 + 40/– 30 % 414 B65495-B-Y33 N30 800 + 40/– 30 % 1660 B65495-+-Y30 1) Replace the + by the code letter ”K“ or ”B“ for the required version. 308 08/01 P 4,6 × 4,1 Accessories B65496 Coil former with positioning lug Material: Winding: GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 °C), color code black see “Processing Notes”, page 155 Sections AN mm2 lN mm A R value µΩ Ordering code 1 0,8 9,5 400 B65496-B1000-T1 Positioning lug 0,35 ø2,67 _ 0,05 ø2,27+0,05 0,6+0,2 3,65 _ 0,08 0,7 AN 0,25 0,25 2,55 _ 0,07 FPK0273-Y 309 08/01 P 4,6 × 4,1 Accessories B65496 Terminal carrier Material: GFR polyether ketone (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 °C), color code natural Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 350 °C, 1 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s Terminal carrier Ordering code With 4 solder terminals for PCB through-hole assembly B65496-B2002 With 4 solder terminals for SMT B65496-B2003 For PCB through-hole assembly For SMT 0,5 2 Bend after soldering 1,5 Nach Löten Benddem after umbiegen soldering 0,9 6,9 _ 0,2 0,2 2,6 _ 0,3 1,5 0,5 0,4 x 0,2 0,4 x 0,2 5 _ 0,1 5 _ 0,1 0,4 x 0,2 0,4 x 0,2 5±0,3 5 _ 0,1 5 _ 0,1 Marking of pin für 1 Stift 1 Kennzeichnung Marking of pin 1 5,08 2,5 2,54 0,8 ø0,8+0,1 1,5 FPK0241-V 7,5 Hole arrangement View in mounting direction Recommended PCB layout 310 08/01 FPK0265-8 P 4,6 × 4,1 B63399 Accessories B65496 Adjusting screw ● Tube core with thread and core brake made of polyacetal Plastic adjusting screwdriver (not shown) Plastic handle for adjusting screwdriver (not shown) Adjusting screw Min. adjusting range Tube core ∅ × length mm Material 1,25 × 1,2 K1 Ordering code Color code % blue 10 B65496-A3001-X1 Adjusting screwdriver B63399-A1007 Handle B63399-B5 Adjusting screw 311 08/01 Herausgegeben von EPCOS AG Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen. Published by EPCOS AG Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 1