PM/P/P Cores Halves/EP/TT/PR Cores Series/Type: P 22 x 13 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product B65662B0000T002 B65661D0000R026 B65662A50020000 B65662A50000000 B65665C00040000 B65665C00050000 B65662B0000T001 B65661D0000R048 Date of Withdrawal 2003-08-08 2002-08-02 2004-10-18 2004-10-18 2004-10-18 2004-10-18 Deadline Last Orders 2004-02-29 2002-12-31 2005-03-31 2005-03-31 2005-03-31 2005-03-31 Last Shipments 2004-08-31 2003-03-31 2005-09-30 2005-09-30 2005-09-30 2005-09-30 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. P 22 × 13 Core B65661 13,9 _ 0,6 0,5+0,2 mm–1 mm mm2 mm2 mm3 0,46 33,2 72,6 58,1 2 410 Approx. weight (per set) m 13 14 ø9,4 _ 0,3 ø4,4+0,2 9,2+0,4 0,5 31,6 63 — 2 000 13,6 _ 0,4 Σl/A le Ae A min Ve 2,9±0,15 with without center hole center hole s 22 _ 0,8 Magnetic characteristics (per set) 17,9+0,6 3,9+0,6 ■ In accordance with IEC 60133 ■ Pot cores are supplied in sets M2,6 x 0,35 g FPK0118-Q Gapped Material N48 µe nH s approx. mm Ordering code 1) -D with center hole -T w. threaded sleeve 160 ± 2 % 250 ± 2 % 315 ± 3 % 630 ± 3 % 1250 ± 5 % 0,50 0,26 0,22 0,10 0,05 64 100 125 250 498 B65661-+160-G48 B65661-+250-G48 B65661-+315-A48 B65661-+630-A48 B65661-D1250-J48 A L value Ungapped Material A L value µe AL1min P V nH nH K1 220 + 30/– 20 % W/set 86 Ordering code -D with center hole -W w/o center hole B65661-D-R1 N26 3800 + 30/– 20 % 1510 N30 8300 + 30/– 20 % 2780 B65661-W-R30 T38 16000 + 40/– 30 % 6370 B65661-W-Y38 N87 4400 + 30/– 20 % 1600 2500 B65661-D-R26 < 1,1 B65661-W-R87 (200 mT, 100 kHz, 100 °C) 1) Replace the + by the code letter ”D“ or ”T“ for the required version. 339 08/01 P 22 × 13 Accessories B65662 Coil former Standard: Material: Winding: to IEC 60133 and DIN 41 294 GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 °C), color code black see “Processing Notes”, page 155 Insulating washer 1 between core and coil former ■ For tolerance compensation and for insulation ■ Polycarbonate spring washer (UL 94 V-0, insulation class to IEC 60085: E 120 °C), 0,06 mm thick Insulating washer 2 between core and terminal carrier ■ For increased dielectric strength ■ Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E 120 °C), 0,08 mm thick Coil former Ordering code Sections AN mm2 lN mm A R value µΩ 1 23,4 44 67 B65662-B-T1 2 22,0 44 69 B65662-B-T2 Insulating washer 1 (reel packing, PU = 1 reel) B65662-A5000 Insulating washer 2 (bulk) B65662-A5002 0,5 Coil former ø9,6+0,15 0,6 9 _ 0,15 ø10,7 _ 0,15 ø9,6+0,15 2,5+0,8 17,8 _ 0,2 ø10,7 _ 0,15 AN 0,6 9 _ 0,15 FPK0267-P FPK0267-P Insulating washer 1 Insulating washer 2 19,8 _0,2 ø9,2±0,2 ø18,3±0,2 3,4 3,5 _ 0,2 1,5±0,2 FPK0120-2 22 _ 0,3 340 08/01 FPK0121-A P 22 × 13 Accessories B65665 Mounting assembly for printed circuit boards ■ The set comprises a terminal carrier and a yoke ■ For snap-in connection Terminal carrier Material: GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 °C), color code gray Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s Yoke Spring yoke, made of tinned nickel silver (0,4 mm), with ground terminal Complete mounting assembly (4 solder terminals) Ordering code: B65665-C5 Complete mounting assembly (8 solder terminals) Ordering code: B65665-C4 4 solder terminals 8 solder terminals Ground Ground Hole arrangement View in mounting direction Hole arrangement View in mounting direction Ground *) a) b) c) Ground This recess must be on the side of the grounding pin to ensure that the yoke locks in position. Yoke Terminal carrier with 4 solder terminals Terminal carrier with 8 solder terminals 341 08/01 Herausgegeben von EPCOS AG Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen. Published by EPCOS AG Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 1