FUJITSU FBR

COMPACT POWER RELAY
1 POLE—20 A
(For Automotive Applications)
FBR53 SERIES
nFEATURES
Compact for high density packaging
High contact capability (40A continuous)
l
High temperature grade (-40˚C to 125˚C)
l
Contact arrangement Form U (form A)
l
l
nORDERING INFORMATION
[Example]
FBR53 ND 012 -Y - ***
(a)
(b) (c) (d) (e)
(a)
Series Name FBR-53 : FBR-53 Series
(b)
Contact Arrangement ND
: Form U
(c)
Nominal Voltage 09
10
12
: 9 VDC
: 10 VDC
: 12 VDC
(d)
Contact Material
Y
: Silver Tin Oxide Alloy
(e)
Custom designation
Nil
-HW
: Standard
: High capacity
Note: The part number on the relay cover does not include 'FBR'
Example:
Ordering part number: FBR-53ND12-Y
Stamped part number: 53ND12-Y
FBR53 SERIES
nCOIL DATA CHART
Standard
Nominal
Voltage
Coil Resistance
(±10% at 20˚C)
FBR53ND09-Y
9 VD C
13 5 Ω
5.4 VDC (at 20˚C)
6.8 VDC (at 85˚C)
FBR53ND10-Y
10 VD C
18 0 Ω
6.3 VDC (at 20˚C)
7.9 VDC (at 85˚C)
FBR53ND12-Y
12VD C
24 0 Ω
7.3 VDC (at 20˚C)
9.2 VDC (at 85˚C)
Nominal
Voltage
Coil Resistance
(±10% at 20˚ C)
FBR53ND09-Y-HW
9 VD C
94 Ω
5.4 VDC (at 20˚C)
7.7 VDC (at 125˚C)
FBR53ND10-Y-HW
10 VD C
11 7 Ω
6.3 VDC (at 20˚C)
9.0 VDC (at 125˚C)
FBR53ND12-Y-HW
12VD C
16 7Ω
7.3 VDC (at 20˚C)
10.4 VDC (at 125˚C)
Model
Must Operate
Voltage
High capacity
Model
Must Operate Voltage
FBR53 SERIES
n SPECIFICATIONS
It em
Contact
Coil
Life
-HW
Form U (Form A)
Material
Silver Tin Oxide
Contact rating
DC 14V, 20A (resistive load)
Maximum Carrying Current
20A continuous (10A each
contact) at 25˚ C
40A continuous (20A each
contact) at 25˚ C
Maximum Inrush Current
60A inrush (30A each
contact) at 25˚ C
80A inrush (40A each
contact) at 25˚ C
Contact Resistance
Average 1.5mΩ at 7A, 12 VDC
Coil Power Consumption
(at rated coil voltage)
Approximately 0.6 W
Operating Temperature Range
-40° C to +125° C (no frost)
Storage Temperature Range
-40° C to +125° C (no frost)
Operating Humidity
45 to 85%RH
Approximately 0.86 W
100MΩ maximum at 500VDC, (at 20˚ C, 65%RH)
500 VAC 50/60 Hz 1 minute, (at 20˚ C, 65%RH)
Operate (at nominal voltage)
10 ms maximum
Release (at nominal voltage)
5 ms maximum
Mechanical
10x106 operations minimum (with no load for contact)
Electrical
1x105 operations minimum (14VDC 20A resistive load)
Vibration
resistance
Other
Standard
Arrangement
Initial resistance
Insulation Dielectric withstanding voltage
between coil and contacts
Time
Sp ec i f i c at i o n
Shock
resistance
Terminal
Weight
Misoperation
10-55Hz,1.5mm dual amplitude, direction X, Y, Z
Endurance
10 to 100Hz, 1.5mm dual amplitude, direction X, Y, Z.
Not be damaged (mechanical and technical) after test.
Coil energizing: 1 hr in each direction, Coil nonenergizing: 1 hr in each direction
Misoperation
100 m/s2 (11ms), direction X, Y, Z
Endurance
1000 m/s2 (11ms), direction X, Y, Z, each 6 times
Not be damaged (mechanical and technical) after test.
Coil energizing: 3 times; Coil non-energizing: 3 times,
total 36 times.
Solderability
at 270±10˚ C for 3±0.5sec. (terminals must be soldered)
Strength
Pulling a terminal in its longitudinal direction for 10 sec.
at 9.8N (1 Kgf)
Approximately 6 grams
*This is the standard value of the minimum load level. This value may differ depending on the switching frequency, environmental
conditions and target reliability standard. We recommend to check this value by an actual load prior to use.
FBR53 SERIES
n DIMENSIONS
Standard
5.7+0
2.3+0
3-0solder
Terminaldimensions(±0.)
COMterminal(2)
.2xt0.26
Coilterminal(2)
.0xt0.3
N.O.terminal(2)
.2xt0.4
5.0±0.2
0.6±0.2
7.0±0.2
2.5±0.2
0.0±0.2
• Mounting hole layout
(bottom view)
• Schematic
(bottom view)
2.5
0.6
(.25)
5.0
7.0
3.5±0.3
.25±0.20
2-Ø.3
+0.
-0
0.0
4.0+0
• Dimensions
4-Ø.5
+0.
-0
Unit: mm
FBR53 SERIES
High Capacity
• Dimensions
5.5±0.2
0.4
3.7±0.3
2.±0.2
Comterminal
2.2xt0.26
Coilterminal
.0xt0.3
N.O.terminal
2.2xt0.4
0.6
2.5
.25 -0.2
• Schematic
+0.2
-0.2
+0.2
-0.2
+0.2
-0.2
6
0
• PCB Mounting hole layout
(bottom view)
2.5
0.6
(.25)
4.0
(bottom view)
4
+0.
2-Ø.3 -0
Tolerance: ±0.1mm
2-2.5x0.6
+0.
-0
6.0
0.0
3.5 +0.3
-0.3
+0.2
+0.2
-0.2
+0.2
-0.2
2-2.5x0.7 +0.
-0
Unit: mm
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://www.fujitsu.com/us/services/edevices/components/
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. May10/2006