SY SERIES MINIATURE RELAY 1 POLE—1 to 2A (FOR SIGNAL SWITCHING) SY SERIES RoHS compliant n FEATURES Very small size and light weight UL, CSA recognized l Conforms to FCC rules and regulations part 68 —Dielectric strength 1000 VAC between coil and contacts —Surge strength 1500 V l High sensitivity l Wide ambient temperature range (-30˚C to +90˚C) l Wide operating range l DIL pitch terminals l Plastic sealed type l Dial-pulse relay available (10pps, 20pps) l RoHS compliant since date code: 0519 Please see page 5 for more information l l n ORDERING INFORMATION [Example] SY – 12 W – K (a) (b) (c) (d) (a) Series Name SY: SY Series (b) Nominal Voltage Refer to the COIL DATA CHART (c) Contact Nil: Single type W: Bifurcated type (d) Enclosure K: Plastic sealed type Note: For movable and stationary contact with gold overlay type, add suffix “–OH” SY SERIES n COIL DATA CHART MODEL Single Bifurcated Nominal voltage Coil resistance Must operate (±10%) voltage Must release voltage Nominal power SY-1.5-K SY-1.5W-K 1.5 VDC 15 Ω 1.05 VDC 0.08 VDC 150 mW SY- 3 -K SY- 3 W-K 3 VDC 60 Ω 2.1 VDC 0.15 VDC 150 mW SY-4.5-K SY-4.5W-K 4.5 VDC 135 Ω 3.2 VDC 0.23 VDC 150 mW SY- 5 -K SY- 5 W-K 5 VDC 167 Ω 3.5 VDC 0.25 VDC 150 mW SY- 6 -K SY- 6 W-K 6 VDC 240 Ω 4.2 VDC 0.3 VDC 150 mW SY- 9 -K SY- 9 W-K 9 VDC 540 Ω 6.3 VDC 0.45 VDC 150 mW SY-12 -K SY-12 W-K 12 VDC 960 Ω 8.4 VDC 0.6 VDC 150 mW SY-18 -K SY-18 W-K 18 VDC 1,940 Ω 12.6 VDC 0.9 VDC 170 mW SY-24 -K SY-24 W-K 24 VDC 3,290 Ω 16.8 VDC 1.2 VDC 175 mW Note : All values in the table are measured at 20°C. SY SERIES n SPECIFICATIONS Item SY-( )-K (Single) SY-( ) W - K (Bifurcated) Contact Arrangement 1 form C (SPDT) Material Gold overlay silver palladium Configuration Single (cross bar) Resistance (initial) Maximum 100 mΩ (at 1 A 6 VDC) Rating (resistive) 0.5 A 120 VAC or 1 A 24 VDC Maximum Carrying Current 2 A Maximum Switching Power 60 AV, 24 W Maximum Switching Voltage 120 VAC/60 VDC 1 A Maximum Switching Current Minimum Switching Load*1 1 mA 1 VDC 0.1 mA 100 mVDC Capacitance (at 10 MHz) Approximately 1.4 pF (between open contacts) Approximately 5.0 pF (between coil and contacts) Coil Nominal Power (at 20°C) 150 to 175 mW Operate Power (at 20°C) 75 to 86 mW Operating Temperature –30°C to +90°C (no frost)/18 V coil: +85°C, 24 V coil: +80°C Time Value Operate (at nominal voltage) Maximum 5 ms Release (at nominal voltage) Life Mechanical Maximum 2 ms 5 × 106 operations minimum Electrical (at contact rating) 1 × 105 operations minimum Other Vibration Misoperation Resistance Endurance 10 to 55 Hz (double amplitude of 1.5 mm) Shock Misoperation Resistance Endurance Weight Bifurcated (cross bar) 10 to 55 Hz (double amplitude of 1.5 mm) 300 m/s2 (11 ±1 ms) 1,000 m/s2 (6 ±1 ms) Approximately 1.7 g *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. n INSULATION Item Single Bifurcated Resistance (initial) Minimum 1,000 MΩ (500VDC) Minimum 1,000 MΩ (250VDC) Dielectric Strength open contacts 400 VAC 1 min. 300 VAC 1 min. coil and contacts 1,000 VAC 1 min. Surge Voltage 1500V (coil-contact) (10/160 µs standard wave) SY SERIES n SAFETY STANDARD AND FILE NUMBERS Type Compliance Contact rating UL UL 508, 873 E 45026 CSA C22.2 No. 14 LR 35579 Flammability: UL 94-V0 (plastics) [SJ-( ) A01] 1A, 265VAC (resistive) [SJ-( ) D01] 1A, 30VDC (resistive) n CHARACTERISTIC DATA SY SERIES n REFERENCE DATA n DIMENSIONS lDimensions l Schematics (Bottom View) l PC board mounting hole layout (Bottom View) Unit: mm SY SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHSon October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. SY SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. January 11, 2008.