ALUMINUM ELECTROLYTIC CAPACITORS HCGW Series (Warranty of 2,000 hours at 85°C) Product Specifications Specifications Item Temperature range –10°C ~ +85˚C Rated current 350 ~ 500V.DC Capacitance tolerance ±20％（20℃,120Hz） This current must be less than or equal to a smaller value of I=0.01CV and 7mA (20℃, 5 minutes). Leakage current (I: Leakage current, C: µF), V: Rated voltage (VDC) Dissipation factor Must be less than or equal to 0.70 (20℃, 120Hz) Features • Product primarily designed for circuits requiring large energy momentarily like those for the uninterruptible power supply (UPS) and X-ray power supply • Capacitance improved by 40%, comparison with the HCGF6 model (smallest model) No abnormality must be found when 2,000 VDC is applied between Withstand voltage the terminal block and the mount fixture (to be attached to the case which has been coated doubly with an armored sleeve). Load at high temperature No load at high temperature The requirements shown in the following table must be met under conditions that allowable ripple currents are superposed at 85℃ within a range not exceeding a rated voltage, voltage is applied for 2,000 hours, then the temperature is lowered again to 20℃. Requirements Characteristic Rate of change Within ±15% of the initial value Dissipation factor value Within 175% of the initial standard Leakage current Within the initial standard value The requirements of the above table (shown in the column“Load at High Temperature”) must be met under conditions that the capacitor is left at 85℃ for 500 hours with no voltage applied, the temperature is lowered again to 20℃ and preprocessing for tests (4.4 in JIS C5102) is performed. Related standard JIS C 5101-4 Ripple current correction coefficient Product code : (Example) 450V 22,000 µF±20% HCGWA Type of series 2W 223 Y Code for rated voltage Code for capacitance Code for fixture (JIS symbol) (The last digit“3”indicates the number of 0s.) (“ Y” is the standard code but “I” may be used instead. “N” is used when no fixture is required.) Ambient temperature (°C) 40 60 70 85 Correction coefficient 1.0 0.75 0.62 0.37 Frequency (Hz) 120 300 1k 10K≦ Correction coefficient 1.0 1.1 1.3 1.4 *When using this capacitor at a frequency below 120 Hz, contact us in advance. (F) Case code (This code is required when multiple kinds of cases are available. For standard products, only the first letter is used. For example,“F”is used for F24R.) *( ) Case code in parentheses : If two types of shape exist for the same rating, enter the first English letter of case code. Attachment of legs • See page 43 for shapes and dimensions. • Product names in the Standard Units Rating Table correspond to the attachment legs for Type Y (Type I for ø36 only), but Type I attachment legs may be used (Shape Code = I). • If attachment legs are not necessary, enter "N" for the attachment leg shape code. • Attachment legs will be delivered separately. Standard value and case size Rated Voltage Capacitance Case size tand Ripple current Case code (Arms) øDXL(mm) V. DC (µF) 20°C,120Hz 40°C,120Hz 077·155 E16R 350V(2V) 13000 0.70 20.7 090·157 F16R 17000 0.70 25.4 077·195 E20R 18000 0.70 26.8 077·235 E24R 22000 0.70 32.1 101·175 G18R 24000 0.70 33.8 090·196 F20R 25000 0.70 33.6 090·236 F24R 0.70 40.4 31000 101·195 G20R 0.70 38.1 101·237 G24R 39000 0.70 46.2 Rated Voltage Capacitance Case size tand Ripple current Case code (Arms) V. DC øDXL(mm) (µF) 20°C,120Hz 40°C,120Hz 077·155 E16R 450V(2W) 9500 0.70 17.9 077·195 E20R 12000 0.70 22.1 090·157 F16R 13000 0.70 21.0 077·235 E24R 15000 0.70 27.3 090·196 F20R 17000 0.70 27.9 101·175 G18R 18000 0.70 27.9 090·236 F24R 0.70 34.3 22000 101·195 G20R 0.70 32.2 101·237 G24R 27000 0.70 38.4 Hitachi AIC Inc. Rated Voltage Capacitance Case size tand Ripple current Case code (Arms) øDXL(mm) V. DC (µF) 20°C,120Hz 40°C,120Hz 077·155 E16R 400V(2G) 11000 0.70 19.2 077·195 E20R 14000 0.70 23.9 077·235 E24R 0.70 28.0 16000 090·157 F16R 0.70 24.8 090·196 F20R 20000 0.70 30.3 101·175 G18R 22000 0.70 30.8 090·236 F24R 0.70 36.6 25000 101·195 G20R 0.70 34.5 101·237 G24R 32000 0.70 41.8 Product name HCGWA2V133Y HCGWA2V173Y HCGWA2V183Y HCGWA2V223Y HCGWA2V243Y HCGWA2V253Y HCGWA2V313YF HCGWA2V313YG HCGWA2V393Y Rated Voltage Capacitance Case size tand Ripple current Case code (Arms) V. DC øDXL(mm) (µF) 20°C,120Hz 40°C,120Hz 077·155 E16R 500V(2H) 5600 0.70 13.7 077·195 E20R 0.70 18.2 8200 090·157 F16R 0.70 17.7 077·235 E24R 9500 0.70 21.7 090·196 F20R 11000 0.70 22.4 101·175 G18R 12000 0.70 22.7 090·236 F24R 0.70 27.4 14000 101·195 G20R 0.70 25.6 101·237 G24R 16000 0.70 29.6 Product name HCGWA2W952Y HCGWA2W123Y HCGWA2W133Y HCGWA2W153Y HCGWA2W173Y HCGWA2W183Y HCGWA2W223YF HCGWA2W223YG HCGWA2W273Y 44 Product name HCGWA2G113Y HCGWA2G143Y HCGWA2G163YE HCGWA2G163YF HCGWA2G203Y HCGWA2G223Y HCGWA2G253YF HCGWA2G253YG HCGWA2G323Y Product name HCGWA2H562Y HCGWA2H822YE HCGWA2H822YF HCGWA2H952Y HCGWA2H113Y HCGWA2H123Y HCGWA2H143YF HCGWA2H143YG HCGWA2H163Y