KMR Series Microminiature Tact Switch for SMT Features/Benefits Typical Applications • • • • • • • • Compact size Range of 4 actuation forces Excellent tactile feel Compatible with lead free soldering • EMC protection • Extra large actuator Automotive Cellular phones Industrial electronics Computers & network equipment Electrical FUNCTION: momentary action CONTACT ARRANGEMENT: 1 make contact = SPST, N.O. TERMINALS: Gullwing type for SMT MAXIMUM POWER: MAXIMUM VOLTAGE: MAXIMUM CURRENT DC: MINIMUM CURRENT DC: Mechanical MAXIMUM ACTUATING FORCE: 40 N (8.8 lbs) during 25,000 cycles Operating force Operating life Type Newtons (grams) (operations) KMR211G/213G 1.0 (100) ± 0.25 200,000 KMR221G/223G 2.0 (200) ± 0.50 200,000 KMR231G/233G 3.0 (300) ± 0.75 100,000 KMR241G/243G 4.0 (400) ± 1.00 100,000 Travel 0,20 0,25 0,25 0,30 ± 0,10 ± 0,10 ± 0,10 ± 0,10 Silver 1 VA 50 VDC 50 mA 1 mA Gold 0.2 VA 50 VDC 10 mA 1 mA CONTACT RESISTANCE: ≤ 100 mΩ INSULATION RESISTANCE: ≥ 1 G Ω BOUNCE TIME: ≤ 1 ms Environmental OPERATING TEMPERATURE: STORAGE TEMPERATURE: Silver -40˚C to 85˚C -55˚C to 85˚C Gold -40˚C to 125˚C -55˚C to 125˚C Process Packaging Soldering: Infrared reflow in accordance with CECC00802 Switches are delivered in tape and reels of 7,000 pieces. The reel diameter is 330 (12.992). The tape dimensions conform to the EIA-RS-481 and EC-286-6 norms. NOTE: Part numbers listed above do not represent all possible configurations. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. K M R 2 G Actuator 2 Standard 1,9 mm Termination G Gullwing Actuation Force 1 1 N (100 grams) 2 2 N (200 grams) 3 3 N (300 grams) 4 4 N (400 grams) Contact Material 1 Silver 3 Gold Dimensions are shown: mm (inch) Dimensions subject to change B-5 www.ittcannon.com B Tactile Switches Specification KMR Series Microminiature Tact Switch for SMT SERIES 1,9 (.074) 1,4 (.055) KMR 0,6 (.024) 4,6 (.181) 0,6 (.024) B 0,1 2,2 (.087) 1,7 (.066) 2,8 (.110) KMR211G 2,22 (.087) STANDARD 1,9 mm 1,7 (.066) 2 0,1 ACTUATOR 2,22 (.087) ACTUATION FORCE OPTION CODE FORCE 1 2 3 4 1 N (100 grams) 2 N (200 grams) 3 N (300 grams) 4 N (400 grams) CONTACT MATERIAL OPTION CODE MATERIAL 1 3 SILVER GOLD TERMINATION GULLWING PAD LAYOUT 3,2 (.126) 1 2 2,6 (.102) 2,2 (.087) 2,1 (.083) 3 GROUND TERMINAL FOR EMC PROTECTION 0,6 (.023) 4,6 (.181) 1 (.039) 1,7 (.066) 5 0,8 (.031) 0,6 (.024) G 4 5 (.197) 0,6 (.024) Tactile Switches 4,1 (.161) First Angle Projection Dimensions are shown: mm (inch) Dimensions subject to change B-6 www.ittcannon.com KMR Series Microminiature Tact Switch for SMT 2±0,05 (.079±.002) ø1,5±0,1 (.059±.004) 4,95±0,1 (.195±.004) 12+0,3/-0,1 (.472+.012/-.004) 2,42±0,1 (.095±.004) 4±0,1 (.157±.004) 5,5±0,05 (.217±.002) 1,75 (.069) TAPE & REEL B Tactile Switches 6˚ max 0,292±0,02 (.011±.001) GROUND TERMINAL ø1,5+0,25/-0,0 (.059+.010/-.000) 3,03±0,1 (.119±.004) Direction of feed First Angle Projection Dimensions are shown: mm (inch) Dimensions subject to change B-7 www.ittcannon.com